Flat Top Barge 300 feet Using Portable Dynamic Positioning System

Agoes Santoso, Juniarko Prananda, Amiadji Amiadji, Edi Jadmiko, Izzu Alfaris Murtadha

Abstract


Portable Dynamic Positioning System has not commonly applied to the ship, especially on barge. Besides for Dynamic Positioning function, the system can be used as ship's main propulsion. By using this system, the ship able to not using anchors because the functions can be performed by the Portable Dynamic System. Therefore, research about the application of Portable Dynamic Positioning System on the ship is conducted. This research aims to design a Flat Top Barge 300feet ship, to determine the specifications of Portable Dynamic Positioning System which is used, and to find out the ship stability which is designed on the empty payload condition and maximum payload. This research designed the ships with main dimensions LWL 90.1 meters, 25 meters wide, 5.5 meters high and 4.2 meters draught. To generate the ship with a maximum speed of 8 knots, it takes four thruster supplied with power 225 kW each, so that the total generated power is 1100 kW. This study analyzes three conditions of the ship stability, there are the condition of full payload, empty payload, and maximum payload. Each payload conditions will be analyzed regarding the large payload and draught water produced. The first is full payload conditions resulting payload in the amount of 5650 ton with a draught on the LCF at 4,181 meters. The second is the large empty payload condition displacement is 2809 ton and water draught on the LCF at 1,591. And the last is maximum payload conditions, resulting payload in the amount of 7450 ton with a draught on the LCF at 4,994 meters.


Keywords


Flat Top Barge 300 feet; Portable Dynamic Positioning System; Thruster; Ship Stability

Full Text:

PDF

References


Adji,S.W, “Diktat kuliah Pengenalan Sistem Propulsi Kapal”, Teknik Sistem Perkapalan FTK-ITS, Surabaya, 2006.

Wibawa,Ari., Trimulyono,Andi., Ubaidilah,Fazjeri. “Perencanaan Kapal Tongkang Sebagai Penyeberangan Masyarakat Di Sungai Bengawan Solo, Desa Jimbung, Kabupaten Blora, Jawa Tengah”,Semarang,2012.

Papalangi,Ferlyn., Mulyatno,Imam Pujo., Manik,Parlindungan. “Studi Perancangan Tongkang Pengangkut Limbah Batubara Di PLTU Tanjung Jati B Jepara”, Tugas Akhir S-1, Teknik Perkapalan UNDIP, Semarang,2015.

Prayoga,Bagus Nandika. “Desain Self Propelled Oil Barge (SPOG) Untuk Distribusi Crude Oil Di Kabupaten Sorong, Papua Barat”, Tugas Akhir S-1, Teknik Perkapalan, Surabaya,2015.

Kemetrian Kelautan Dan Perikanan. “Perencanaan Detail Engineering Design (DED) Kapal Riset 60 Meter”. Jakarta: PT Binomical Persada.2016.

Prayoga,Bagus Nandika. “Desain Self Propelled Oil Barge (SPOG) Untuk Distribusi Crude Oil Di Kabupaten Sorong, Papua Barat”, Tugas Akhir S-1, Teknik Perkapalan, Surabaya,2015.

Dynamic Positioning Conference.”Basic Of Dynamic Positioning”. Houston:Kongsberg Simrad Inc, 1998.

Sorensen,J Asgeir.”Dynamic Positioning System Overview And Trends”, Department Marine Of Teknologi, Norwegian University OF Science And Technology, Norwegian, 2013




DOI: http://dx.doi.org/10.12962/j25481479.v1i2.1977

Refbacks

  • There are currently no refbacks.


Abstracted / Indexed by:
      
  

 

 

 

 

 

P-ISSN: 2541-5972   

E-ISSN: 2548-1479

 

Lisensi Creative Commons

IJMEIR journal published by  Department of Marine Engineering, Faculty of Marine Technology, Institut Teknologi Sepuluh Nopember Surabaya Indonesia under licenced Creative Commons Attribution-ShareAlike 4.0 International Licence. Based on https://iptek.its.ac.id/index.php/ijmeir/