Cooling System Design for Cold Storage of Traditional Fishing Boat Using Insulation from Rice Husk

Muhammad Abidin Abidin, Alam Baheramsyah, Ede Mehta Wardhana

Abstract


Quality of fish is an important factor and determines the high selling price of fish in the market. In achieving that it will require proper handling in the process of cooling the fish before it is sold. To keep the freshness of the fish, fishermen usually use Styrofoam-based coolbox as its isolation. In this study modify coolbox using rice husk which serve as insulation on coolbox. This study aims to determine the effect of insulation using rice husk over time and temperature which will be compared with Styrofoam coolbox. Before the experiment, the first thing to do is to test the composition of rice husk with white cement. Where is the best composition to be used as insulation on coolbox. The tests are thermal conductivity, density, and flexural strength tests. From the test results obtained the best composition of rice husk and white cement is 1: 1 which has a thermal conductivity (0.746 W / mK) and density (0.32 gr / cm3) better than other compositions. In the experiments performed using 3 kg of wet ice it was found that in 24 hours cooling time, the rice husk coolbox had the lowest temperature of 13.5 ° C and the lowest Styrofoam coolbox temperature was 10.6 ° C.


Keywords


Insulation technology, Coolbox and Fish Refrigeration

Full Text:

PDF

References


A. A. Aziz (2012).Desain Sistem Pendingin Ruang Muat Kapal Ikan Tradisional Dengan Menggunakan Es Kering. Tugas Akhir Jurusan Teknik Sistem Perkapalan, Institut Teknologi Sepuluh Nopember, Surabaya.

Sondana,Agung (2013). Desain Sistem Pendingin Ruang Muat Kapal Ikan Tradisional Dengan Teknologi Insulasi Vakum. Tugas Akhir Jurusan Teknik Sistem Perkapalan, Institut Teknologi Sepuluh Nopember, Surabaya.

Dinda Putra ,Indaswara (2013) .Modifikasi Coolbox Dengan Insulasi Pendinginan Freon Pada Ruang Muat Kapal Ikan Tradisional. Tugas Akhir Jurusan Teknik Sistem Perkapalan, Institut Teknologi Sepuluh Nopember, Surabaya .

S. Arbintarso, Ellyawan. Muhajir,Khairul. Sujatmiko,Andhi, 2008. Kotak Penyimpan Dingin Dari Papan Partikel Padi, Teknologi Jurusan Teknik Mesin, ST AKPRIND ,Yogyakarta

Japanese Standards Association A 5908 . 2003. “Japanese Industrial Standard Particle Board”.Annual Book of JIS

American Society for Testing Material E 1225-13. “Standard Test Method for Thermal Conductivity of Solids Using the Guarded Comparative Longitudinal Heat Flow Technique”. Annual Book of ASTM.

Ratu fortuna (2009). Kualitas Papan Semen dari Sekam Padi. Tugas akhir Departemen Hasil Hutan, Fakultas Kehutanan, Institut Pertanian Bogor, Bogor

Sutigno P. 1994. Perekat dan Perekatan, Diktat Pusat Penelitian dan Pengembangan Hasil Hutan. Departemen Kehutanan. Bogor.

Chandra,Andy,Miryanti,Arry, W.Budyanto, Pramudita,Andika, 2012.Isolasi Dan Karakteristik Silika Dari Sekam Padi. Universitas Katolik Prahayangan.

Wills JH. 1965. Inorganic Adhesive and Cement. Part B Miscellaneous Inorganic Materials. dalam Adhesion and Adhesives Volume I. R. Houwink and G. Salomon, ed. Elsevier Publishing Company, London.




DOI: http://dx.doi.org/10.12962/j25481479.v3i1.2501

Refbacks

  • There are currently no refbacks.


Abstracted / Indexed by:
      
  

 

 

 

 

 

P-ISSN: 2541-5972   

E-ISSN: 2548-1479

 

Lisensi Creative Commons

IJMEIR journal published by  Department of Marine Engineering, Faculty of Marine Technology, Institut Teknologi Sepuluh Nopember Surabaya Indonesia under licenced Creative Commons Attribution-ShareAlike 4.0 International Licence. Based on https://iptek.its.ac.id/index.php/ijmeir/