Analysis of Electrical Power Consumption in Container Crane of Container Terminal Surabaya

A.A. Masroeri, Eddy Setyo Koenhardhono, Fathia Fauziah Asshanti

Abstract


Container crane electrification is a re-powering process of container cranes from diesel to electricity. In electrification process, it is required an analysis of electrical power consumption that is needed in the operational of container crane. It aims to determine whether the amount of electrical power that is supplied by PLN can be optimally used in the operational of container crane to do loading and unloading activities. To perform the analysis of electrical power consumption, it is required various data and calculations. The required data are container crane specifications and other electrical equipment specifications, the amount of electrical power that is supplied by PLN, also the single line diagram from the electrical system at the port. While, the calculations that is needed to be performed are the calculation of electrical power load in motors and other electrical equipments, the calculation of nominal current and start current, the selection of cable and busbar, and the calculation of wiring diagram junction power. From the calculations that has been done, then the next step is to do the load flow analysis simulation by using software simulation, so an accurate and effective load flow analysis can be obtained to optimize loading and unloading activities at the port. The result of this research, it can be seen that container crane electrification will give advantages in both technical and economical for the company and for the ship, such as accelerate the loading and unloading time of containers and reduce idle time, especially in the operational of diesel generator.

Keywords


Container Crane; Electrification; Load Flow; Optimalization

Full Text:

PDF

References


Arwinas, D. (1999). Petunjuk Penanganan Kapal dan Barang di Pelabuhan, PT (Persero) Pelabuhan Indonesia II. Jakarta.

Hutagalung, B. R. (2004). Dampak Aktivitas Pelabuhan dan Sebaran Pencemaran Lingkungan Pelabuhan Tanjung Emas Semarang dan Kawasan Sekitarnya. Semarang: Universitas Diponegoro.

Iqbal, M. (2011). Analisa Kapasitas Daya Listrik Container Crane untuk Optimalisasi Proses Bongkar Muat. Surabaya: Institut Teknologi Sepuluh Nopember.

Multa, Lesnanto. Restu Prima Aridani. (2013). Modul Pelatihan ETAP. Yogyakarta: Universitas Gadjah Mada.

Salman, Rudi. Mustamam. Arwadi Sinuraya. (n.d.). Simulasi dan Analisis Aliran Daya pada Sistem Tenaga Listrik Menggunakan Perangkat Lunak Electrical Transient Analyser Program (ETAP) Versi 4.0. Medan: Universitas Negeri Medan.

Saragi, S. H. (2012). Sistem Operasi Container Crane (CC) di Terminal Petikemas Semarang. Semarang: Universitas Diponegoro.

Sasono, H. B. (2012). Manajemen Pelabuhan dan Realisasi Ekspor Impor. Yogyakarta: Andi Offset.

(2017). Simulasi Load Flow Analysis ETAP 12. Surabaya: Power System Simulation Laboratory.




DOI: http://dx.doi.org/10.12962/j25481479.v2i1.2623

Refbacks

  • There are currently no refbacks.


Indexed in 

       

 

eISSN: 2548-1479

Creative Commons License
International Journal of Marine Engineering Innovation and Research by Department of Marine Engineering ITS is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at http://iptek.its.ac.id/index.php/ijmeir.