Design of Model Predictive Torque Control (MPTC) for Speed Control 3 Phase Induction Motor with Robust Stator Flux Observer

Halim Mudia, Mochammad Rameli, Rusdhianto Efendi

Abstract


The induction motor is a desirable alternative to the direct current motor in many applications because it is rugged, reliable and economical. However, control of the induction motor is more complex than the direct current motor, this is caused by the complexity of the dynamics of the induction motor, so the algorithm of induction motor is more complex. Based on these problem, author conducted a study on the induction motor using Model Predictive Torque Control (MPTC) with robust stator flux observer, in which robust stator flux observer is designed to overcome the shortcomings in the Direct Torque Control (DTC) conventional which can cause high fluctuation in flux ripple and torque ripple when reach steady state condition. So from the purpose of the proposed method, the results of the designed system can adjust the rotating speed of the induction motor in accordance references given at 120 rad/s with a settling time is 0.753 seconds, and also can minimize fluctuations in flux ripple and torque.

Keywords


Direct Torque Control; Induction Motor; Model Predictive Control; Robust Stator Flux Observer

Full Text:

PDF

References


Bose, K. B. “Modern Power Electronics and AC Drives”, Prentice Hall, Knoxville, 2002.

Ramesh, T., Panda, K. A. “Direct Flux and Torque Control of There Phase Induction Motor Drive Using PI and Fuzzy Logic Controllers for Speed Controller for Regulator and Low Torque Ripple ”. Department of Electrical Engineering, National Institute of Tecnology, India, 2012.

Diab, Z. A. A., Pankratov, V. V. “Model Predictive Control of Vector controlled Induction Motor Drive”, IEEE 2012 7th International Forum on Strategic Technology (IFOST), Russia, 2012.

Sun, D. “Sliding Mode Direct Torque Control for Induction Motor with Robust Stator Flux observer”, IEEE 2010 International Conference on Intelligent Computation Technology and Automation, China, 2010.




DOI: http://dx.doi.org/10.12962/j23546026.y2015i1.1148

Refbacks

  • There are currently no refbacks.


View my Stat: Click Here

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.