Experimental and Numerical Bending Analysis of Steel/Resin-Talk Sandwich Material

Pratama Arianto, Achmad Zubaydi, Bambang Piscesa, Tuswan Tuswan

Abstract


Sandwich material can be used as the substitute for the ship conventional material. The core sandwich material used in this study consisted of a talk-resin-catalyst. The core mixture proportion is 90% resin and 10% talk. A thick steel plates is used as the face of the core sandwich material. Both experimental and numerical simulations are carried out to investigate the bending or flexural behavior of the proposed sandwich material. Three-point bending test has been carried out to determine the yield stress and maximum stress as well as the damage mechanism of the specimen up-to failure. From the investigation, the first failure process occurred at the mid-span as flexural cracks. As the load continue, these flexural cracks progressed until fully fracture of the core material take places. From the experimental investigation, it was found that the yield stress and maximum stress of the sandwich panel are 22.88 MPa and 28.63 MPa. On the other hand, numerical simulation is carried out using ABAQUS which has shown to be sufficient to predict the response of the sandwich-panel. However, a more sophisticated constitutive model is required to successfully model the experimental behavior in close agreement.

Keywords


Bending Test; Sandwich Structure; Failure Mechanism; Talk; Unsaturated Polyester Resin

Full Text:

PDF

References


H. Kilic and R. Haj-Ali, “Progressive damage and nonlinear analysis of pultruded composite structures,” Composites, vol. 34, no. 3, pp. 235–250, 2003.

S. Herman, J. Wellnitz, S. Jahn, and S. Leonhardt, “Structural Health Monitoring for Carbon Fiber Resin Composite Car Body Structures,” Sustain. Automot. Technol., pp. 75–96, 2013.

K Abdullah, “Application of Sandwich Plate System Made from Core Shellfish Waste on the Ship Deck,” J. Ilm. Teknol. Marit., vol. 12, no. 2, pp. 53–60, 2019.

SH Sujiatanti, “Finite Element Analysis of Ship Deck Sandwich Panel,” Trans Tech Publ., vol. 874, pp. 134–139, 2018.

A. Zubaydi, A. Budipriyanto, and S. H. Sujiatanti, “Studi Numerik dan Eksperimental Identifikasi dan Monitoring Kerusakan Struktur Kapal Berbahan Sandwich Panel,” Surabaya, 2018.

K. Ramakrishnan and P. Kumar, “Application of Sandwich Plate System for Ship Structures,” IOSR J. Mech. Civ. Eng., pp. 83–90, 2016.

N. Momcilovic and M. Motok, “Estimation of Ship Lightweight Reduction by Means of application of Sandwich Plate System,” FME Trans., vol. 37, no. 3, pp. 123–128, 2009.

U. E. and B. A., “Prelimenary Study of Sandwich Panel Application In Ship Construction: Combination of Plywood and Polyurethane Material,” in Seminar Nasional Teori dan Aplikasi Teknologi Kelautan, 2015.

P. Kujala and K. Alan, “Steel Sandwich Panels in Marine Applications,” Brodograndja, vol. 56, no. 4, pp. 305–314, 2005.

E. Utomo, A. Zubaydi, and P. Pratisna, “Study of Core Material Sandwich Panel In Ship Construction,” in The 2nd International Seminar on Science and Technology, 2017.

S. Zubaydi, “Development of Sandwich Core Material for Deck Structure,” Int. J. Civ. Eng. Technol., vol. 9, no. 11, pp. 2551–2560, 2018.

K. Abdullah, A. Zubaydi, and A. Budipriyanto, “Development Of Sandwich Panel With Core From Clamshell Powder For Ship Structure,” in SENTA 2017 - International Conference on Marine Technology, 2017.

A. Mula, A. Zubaydi, and A. Budipriyanto, “Properties of Sandwich Panel Core From Eggshell Powder For Ship Structure,” in SENTA 2017 - International Conference on Marine Technology, 2017.

Yudiono, A. Budipriyanto, and A. Zubaydi, “Tests On Sandwich Plate Core Materials With Rice Husk Filler For Ship Deck Structure,” in SENTA 2017 - International Conference on Marine Technology, 2017.

M. S. Purwoko, A. Budipriyanto, and A. Zubaydi, “Study on Wood Sawdust for Sandwich Core Material of Ship Structure,” in SENTA 2017 - International Conference on Marine Technology, 2017.

ASTM International, “ASTM C 393 - 00 Standard Test Method for Flexural Properties of Sandwich Constructions,” 2000.

L. Register, “Provisional Rules for The Application of Sandwich Panel Construction to Ship Structure,” United Kingdom, 2015.

W. Iswidodo, “Multiple Damages Identification of Sandwich Panel Material on Ship Structure Using Vibration Response,” Surabaya, 2017.




DOI: http://dx.doi.org/10.12962/j20882033.v30i3.5496

Refbacks

  • There are currently no refbacks.


Creative Commons License

IPTEK Journal of Science and Technology by Lembaga Penelitian dan Pengabdian kepada Masyarakat, ITS is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://iptek.its.ac.id/index.php/jts.