Konsep Two-in-One pada Desain Trandem, Sliding Tandem, Air Purifier, dan Portable Commuter Bikes

Bambang Iskandriawan, Primaditya Primaditya, Hertina Susandari, Ellya Zulaikha, Bambang Tristiyono

Abstract


Abstrak—Fungsi ekstra produk sepeda untuk dapat memenuhi kebutuhan baru yang semakin beragam berikut permasalahan lingkungan yang timbul akan memantik ide segar untuk membuat desain sepeda lebih kreatif lagi sesuai dengan kebutuhan masyarakat tersebut. Tujuan dibuatnya desain sepeda yang tidak hanya berfungsi tunggal tersebut akan dapat lebih memenuhi kebutuhan pengguna produk. Konsep two-in-one pada sebuah sepeda mengakibatkan fungsi sepeda menjadi tidak hanya sebagai alat transportasi semata. Inovasi desain produk sepeda yang dihasilkan merupakan sebuah solusi yang ditunggu oleh masyarakat. Metode yang dipergunakan adalah dengan mengimplementasikan secara intens design thinking: empathize, define, ideate, prototype, dan test. Pada setiap aktivitas riset sangat mungkin dilaksanakan sub-aktivitas yang akan dapat memperkuat hasil desain. Analisa struktur sepeda dengan simulasi numerik dapat mengontrol desain alternatif sepeda. Dari empat buah desain dan prototipe sepeda yang telah diwujudkan selanjutnya dapat disusun program hilirisasi produk hasil riset. Dimana fitur-fitur andalannya adalah sebuah konsep two-in-one yang melekat pada setiap produk sepeda tersebut.

AbstractThe extra function of bicycle products to meet new, increasingly diverse needs along with environmental problems that arise will bring up fresh ideas to make bicycle designs more creative according to the needs of the community. The purpose of making a bicycle design that does not only have a single function will be able to better meet the needs of product users. The concept of two-in-one on a bicycle resulted in the function of the bicycle being not only as a means of transportation. The resulting bicycle product design innovation is a solution that is awaited by the community. The method used is to implement design thinking intensely: empathize, define, ideate, prototype, and test. In each research activity, it is possible to carry out sub-activities that will strengthen the design results. Structure analysis of bicycles with numerical simulation can control alternative designs of bicycles. From the four bicycle designs and prototypes that have been realized, a downstream program for research products can be arranged. Where the flagship features are a two-in-one concept that is attached to each of these bicycle products.


Keywords


two-in-one concept, bike design, trandem bike, sliding tandem bike, air purifier bike, and portable commuter bike

Full Text:

PDF PDF

References


B. Iskandriawan, “Seputar riset, desain, publikasi, dan hilirisasi produk-produk Trandem, Sliding Tandem, Air Purifier, dan Portable Commuter Bikes”, diterbitkan oleh Penerbit Nas Media Pustaka, Anggota IKAPI, ISBN 978-623-6093-85-6, 178 halaman (2021)

M. Embacher, Foreword by Paul Smith, “Cyclepedia a tour of iconic bicycle designs”, Thames & Hudson, ISBN 978-0-500-51558-7 (2011)

D. Wiyancoko, “Desain Sepeda Indonesia”, KPG (Kepustakaan Populer Gramedia), ISBN: 978-979-91-0243-0 (2010)

B. Iskandriawan and Jatmiko, “The development of bicycle into Trandem: the bike can be used as tandem or single depend of the necessity”. AMM 607, 920-925 (2014)

B. Iskandriawan, Jatmiko, E.N. Ustazah and F. Hawari, “Tandem bike design for apartment residents as an idea to reduce air pollution”. Matec Web of Conferences 101, 03017 (2017). SICEST 2016

B. Iskandriawan, D. Kuswanto, and E.F. Soedjito, “Bicycle design for children with spastic cerebral palsy to enhance interaction between children and parents”. Proceedings of 1st International Conference on Bioinformatics, Biotechnology, and Biomedical Enineering. Biomic (2018)

B. Iskandriawan, and Jatmiko, “Air purifier bike design and prototype as a short distance transportation plus an effort to downgrade the level of air pollution concentration in towns ”, Broad Exposure to Science and Technology 2019 (BEST2019), IOP Conf. Series: Materials Science and Engineering 673 (2019) 01208 (2019)

B. Iskandriawan, Jatmiko, A. Windharto and A.D. Krisbianto, “Main frame structure exploration of sliding tandemnbike as the effort to enhance product feature”. Journal of Engineering and Applied Sciences 13 (7), 1872-1876, ISSN: 1816-949X, © Medwell Journals (2018)

B. Iskandriawan, J.A. Nugroho, and Jatmiko, “Numerical structure analysis of air purifier bike with frame designs and materials variation”, Innovative Science and Technology in Mechanical Engineering for Industry 4.0, AIP Conf. Proc. 2187, 030001-1-030001-7, Published by AIP Publishing, 978-0-7354-1934-6 (2019)

N. Cross, “Engineering Design Methods, Strategies for product design”, Second Edition (John Wiley & Sons Ltd, Baffins Lane, Chichester, West Sussex, PO19, England, 1998)

M. Ashby, K. Johnson, “Materials and design, the art and science of material selection in product design” (Butterworth Heinemann, Oxford, UK, 2007)

B. Iskandriawan, Jatmiko, A. Safaat, and J.A. Nugroho, “Air velocity and pressure drop exploration inside pipe frame of air purifier bicycle using numerical analysis”, Journal of Engineering Science and Technology, Vol. 15, No. 6, 3935-3954 (2020)

H. Christians and A. Bremmer, “Applied ergonomics” , 29, 3, 201-211 (1998)

PC Donkers, HM Toussaint, JF Molenbroek and LP Steenbekkers, “Applied ergonomics”, 24, 2, 109-118 (1993)

C.Hsiang Chen, Y. Hao Huang and T. Yuang Shiang, J., “Science and cycling”, 4, 1, 28-32 (2015)

R.L. Mott, “Machine element in equipment design”, Volume 1 and 2 , Publisher: Andi (2009)

D. Norman, “Emotional design why we love (or hate) everyday things”, EBOOK / ISBN-13: 9780465004171 (2018)




DOI: http://dx.doi.org/10.12962/iptek_desain.v20i2.11592

Refbacks

  • There are currently no refbacks.


Creative Commons License
Jurnal Desain IDEA is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

View My Stats

Terdaftar pada LIPI dengan e-ISSN 2580-0264 dan p-ISSN 1411-3023