An Analysis of Service Capacity at Ambon Port

Rosliawati A, Jumriani Jumriani

Abstract


This research aims to determine container services, to determine projections and the need for container facilities in relation to traffic projections. This study used qualitative descriptive analysis, namely a method that explains in the form of numbers from the growth of activities. This research was conducted with interviews, library research and documentation. The results of the study show that the flow of container ships has increased. In 2020 it was projected to be 355 calls. It will continue to increase until it is projected to be 560 calls in 2029. Meanwhile, the projected realization of the flow of goods in containers in 2020 was 1,243.164 tons, and the realization of containers is predicted to be 2,015,767 tons. The Berth Occupancy Ratio can be maintained at a maximum of 70% according to the standards, so the length of the wharf at Ambon Port where in 2021, the flow of containers has reached 128,662 TEUs with the number of container ships 377 Calls, the length of the container reached 352 meters. As for the storage yard, the required storage area is 42,316 m2. As for the storage yard at Ambon Port, until 2029, the required storage area is 42,316 m2. 


Keywords


accumulation field; containers; port of Ambon; service capacity

Full Text:

PDF

References


A. Aqmarina and N. Achjar, “Determinants of Port Performance – Case Study of 4 Main Ports in Indonesia (2005–2015),” Econ. Financ. Indones., vol. 63, no. 2, pp. 176–185, 2017.

A. Nurhadini and M. Indrayadi, “Optimasi Pelayanan Bongkar Muat Peti Kemas Di Pelabuhan Dwikora Pontianak,” JeLAST J. PWK, Laut, Sipil, Tambang, vol. 6, no. 1, pp. 1–11, 2018.

T. M. Fachrurrazi, I. Nyoman Budiartha, I. Nyoman, and K. Mataram, “Analisis Kinerja Dermaga Terhadap Pertumbuhan Pengguna Jasa Transportasi Laut Di Pelabuhan Padangbai-Bali,” J. Ilm. Tek. Sipil; JIMATS, vol. 01, no. 02, pp. 24–28, 2022.

M. Dachyar, “Simulation and Optimization of Services at Port in Indonesia,” Int. J. Adv. Sci. Technol., vol. 44, pp. 25–32, 2012.

S. D. Adris.A.Putra, “Pengembangan Infrastruktur Pelabuhan Dalam Mendukung Pembangunan Berkelanjutan,” J. Ilm. Media Eng., vol. 6, no. 1, pp. 433–443, 2016.

M. Vacca, I., Salani, M., and Bierlaire, “Optimization of operations in container terminals: hierarchical vs integrated approaches,” 2010.

S. V. Renaldi and N. U. Handayani, “Analisis Waste Pada Aliran Proses Pembongkaran ( Unloading ) Kayu Log Dengan Pendekatan Lean Service Pada Terminal Nusantara Pelabuhan Tanjung Emas PT . PELINDO III ( PERSERO ),” Ind. Eng. Online J., vol. 7, no. 4, 2019.

M. Idrus, L. Samang, R. Adisasmita, G. Sitepu, and M. I. Ramli, “A Study on the Container Yard Utilization of the Major Ports in Indonesia Eastern Region,” Int. J. Eng. Technol. IJET-IJENS, vol. 12, no. 3, 2012.

D. I. Pau, “Analisis Kapasitas Pelayanan Pelabuhan Maumere,” in Seminar Nasional Sains dan Teknik (Sainstek) ke-2 Undana, 2014, no. 42.

]N. T. & S. S. F. A. Nuliyati Rumbia, “Evaluasi Kapasitas Pelabuhan Yos Soedarso Ambon-Provinsi Maluku (Yos Soedarso Port Capacity Evaluation Ambon-Maluku Province),” Uniqbu J. Exact Sci., vol. 3, no. April, 2022.

R. A. H. Ratna Efiliani Putri, “Penilaian Kapasitas Terminal Peti Kemas Pelabuhan Teluk Bayur Capacity Assesment Of Container Terminal,” J. Manaj. Transp. Logistik, vol. 03, no. 2, pp. 149–160, 2016.

F. A. Barata et al., “Berthing time in the port of Tanjung Priok, Jakarta, Indonesia,” Grow. Sci. Ltd, vol. 10, pp. 1387–1396, 2022, doi: 10.5267/j.uscm.2022.6.018.

S. N. Hasanah, “Pengaruh Produktivitas Quay Crane Twinlift Terhadap Waktu Sandar Kapal Di Dermaga Utara,” J. Manaj. Bisnis Transp. dan Logistik, vol. 1, no. 1, 2014.

A. Azizah, “Analisis Kapasitas Dermaga Terminal Peti Kemas Pelabuhan Peti Kemas Palaran Samarinda Berdasarkan Nilai Berth Occupancy Ratio Dan Berth Througput,” J. Marit., vol. 11, no. 2, pp. 51–57, 2021.

J. K. and A. E. S. R. Rivas-Hermann, “Innovation in product and services in the shipping retrofit industry: A case study of ballast water treatment systems,” J. Clean. Prod., vol. 3, no. 1, pp. 1–23, 2015, doi: http://dx.doi.org/10.1016/j.jclepro.2014.06.062.

J. W. Creswell, Educational Research:Planning, Conducting, and Evaluating Quantitative and Qualitative Research. Boston, United States of America: University of Nebraska–Lincoln, 2012.

K. Juuti and J. Lavonen, “Design-Based Research in Science Education: One Step Towards Methodology,” Nord. Stud. Sci. Educ., vol. 2, no. 2, pp. 54–68, 2012, doi: 10.5617/nordina.424.

A. Sugiyono, Metode Penelitian Pendidikan Pendekatan Kualitatif, Kuantitatif dan R & D. Alfabeta, Bandung. 2018.

N. T. & S. S. F. A. Nuliyati Rumbia, “Evaluasi Kapasitas Pelabuhan Yos Soedarso Ambon-Provinsi Maluku Yos Soedarso Port Capacity Evaluation Ambon-Maluku Province,” Uniqbu J. Exact Sci., vol. 3, no. April, 2022.

A. P. Silent, “Upaya Peningkatan Pelayanan Jasa Keagenan Kapal Pt. Samudra Moda Selaras,” J. Cakrawala Bahari, vol. 3, no. 2, pp. 1–12, 2020, [Online]. Available: http://jurnal.poltekpelsumbar.ac.id/index.php/jcb.

A. N. Petrus Pattiasina, “Analisis Operasional Bongkar Muat Pada PT. Pelabuhan Indonesia IV (Persero) Terminal Peti Kemas Bitung,” in Prosiding Seminar Nasional SMIPT 2021 Sinergitas Multidisiplin Ilmu Pengetahuan dan Teknologi, 2021, vol. 4, pp. 445–455.

P. Katias and I. K. Muhammad, “Analisis Kinerja Berth Time Kapal Kargo Muatan Curah Kering dan Usulan Perbaikannya di Terminal Jamrud Pelabuhan Tanjung Perak Surabaya,” Bus. Financ. J., vol. 2, no. 2, pp. 145–158, 2017.

K. J. Carlo, H. J., Vis, I. F., & Roodbergen, “Storage yard operations in container terminals: Literature overview, trends, and research directions,” Eur. J. Oper. Res. 235(2), 412–430, 2014, doi: https://doi.org/10.1016/j.ejor.2013.10.054.

N. Karam, A., Eltawil, A., & Harraz, “An improved solution for integrated berth allocation and quay crane assignment problems in container terminals,” 2014.




DOI: http://dx.doi.org/10.12962/j25481479.v8i1.15383

Refbacks

  • There are currently no refbacks.


Abstracted / Indexed by:
      
  

 

 

 

 

 

P-ISSN: 2541-5972   

E-ISSN: 2548-1479

 

Lisensi Creative Commons

IJMEIR journal published by  Department of Marine Engineering, Faculty of Marine Technology, Institut Teknologi Sepuluh Nopember Surabaya Indonesia under licenced Creative Commons Attribution-ShareAlike 4.0 International Licence. Based on https://iptek.its.ac.id/index.php/ijmeir/