Numerical Investigation of the Laying of Airbag Arrangements on Launching Barges
Abstract
Keywords
Full Text:
PDFReferences
Alamsyah & Wira Setiawan, Peluncuran Kapal: Metode End Launching, 1st ed. Karanganyar: Surya Pustaka Ilmu, 2021.
Zulis Irawanto, Navik Puryantini, B. Ali, B.S. Prasodjo “EXPERIMENTAL STUDY ON SHIP LAUNCHING USING AIRBAGS,” MIPI, vol. 13, no. 1, pp. 55–64, 2019.
Saeni Rahma, “Penentuan Kebutuhan dan Tata Letak Airbag pada Peluncuran Kapal Tongkang 280 FT,” Politeknik Batam, 2019.
T. S. Wisnawa, T.W. Pribadi, I. Baihaqi “Analisis Risiko Terjadinya Kerusakan Kapal Pada Proses Penurunan dengan Metode Airbag,” J. Tek. ITS, vol. 6, no. 1, pp. G22–G28, 2017.
A. I. Wulandari, R. J. Ikhwani, Suardi, R. S. Yani, A. N. Himaya, Alamsyah “Collision Analysis of A Self Propeller Oil Barge (SPOB) Using Finite Element Method,” Kapal J. Ilmu Pengetah. dan Teknol. Kelaut., vol. 19, no. 2, pp. 101–111, 2022.
Alamsyah, A. R. Falevi, A. I. Wulandari, M. U. Pawara, W. Setiawan and A. M. N. Arifuddin, “Investigating the Local Stress of Car Deck Ro-Ro 5000 GT,” EPI Int. J. Eng., vol. 4, no. 1, pp. 51–56, 2021.
M. U. Pawara, W. Setiawan, Alamsyah, Suardi, R. Ramadhani“Design of Self-Propelled Container Barge for Logistics Transportation of Samarinda-Kotabangun,” J. J. Penelit. Enj., vol. 25, no. 2, pp. 92–97, 2021.
Alamsyah, A. I. Wulandari, N. S. Oktaparo, M. U. Pawara, “The Fatigue Life Assessment of Sideboard on Deck Barge Using Finite Element Methods,” Maj. Ilm. Pengkaj. Ind., vol. 16, no. 1, pp. 1–10, 2022.
X. Liu, Y. Hu, Z. Mao, W. Tian “Numerical Simulation of the Hydrodynamic Performance and Self-Propulsion of a UUV near the Seabed,” Appl. Sci., vol. 12, no. 6975, pp. 1–21, 2022.
A. A. Alubokin, B. Gao, Z. Ning, L. Yan, J. Jiang, E.K. Quaye“Numerical simulation of complex flow structures and pressure fluctuation at rotating stall conditions within a centrifugal pump,” Energy. Sci. Eng., pp. 1–24, 2022.
N. A. A. Khalid, and R. Rahmad “Numerical and Simulation Study of Cavitation in Centrifugal Pump at Low Flow Rate,” J. Adv. Ind. Technol. Appl., vol. 3, no. 1, pp. 19–23, 2022.
K-K. Yang, Y-C. Kim, K-S. Kim, S.M. Yeon “Numerical Analysis on Turning and Yaw Checking Abilities of KCS in Calm Water a Based on Free-Running Simulations,” J. Soc. Nav. Archit. Korea, vol. 59, no. 1, pp. 1–8, 2022.
Y. Wei, and T. Tezdogan “A FLUID-STRCUTURE INTERACTION MODEL ON THE HYDROELASTIC ANALYSIS OF A CONTAINER SHIP USING PRECICE,” in 41st International Conference on Ocean, Offshore and Arctic Engineering, 2022, p. 78131.
M. U. Pawara, Alamsyah, R. J. Ikhwani, A. R. Siahaan, A.M.N. Arifuddin “A Finite Element Analysis of Structural Strength of Ferry Ro-Ro’s Car Deck,” J. Inov. Vokasional dan Teknol., vol. 22, no. 1, pp. 47–60, 2022.
M.Z. M. Alie, M. Fathurahkman, Juswan, F.A. Prasetyo “Numerical estimation of ultimate strength on double hull oil tanker cargo area,” in Developments in the Analysis and Design of Marine Structures, 1st ed., CRC Press, 2021, p. 6.
M. Z. M. Alie, I. M. Suci, A. M. A. Arafat, Juswan, W. Mustafa “Modification of Double Bottom Height and Its Effect to the Ultimate Strength,” 2022.
M.Z.M. Alie, D. Ramasari, T. Rachman, R. Adiputra “Effects of Collision Damage on the Ultimate Strength of FPSO Vessels,” Makara J. Technol., vol. 24, no. 1, pp. 1–6, 2020, [Online]. Available: https://scholarhub.ui.ac.id/cgi/viewcontent.cgi?article=1385&context=mjt.
R. B. Purba, Juswan, M. Z. M. Alie “Structural response analysis of jack-up during system jacking lifting process,” in The 2nd International Conference of Interdisciplinary Research on Green Environmental Approach for Sustainable Development, 2020, pp. 1–6.
T. Rizkiani, M.Z.M. Alie, M.I. Ramadhan “Progressive Collapse Behaviour of VLCC under Longitudinal Bending,” in The 5th International Symposium on Material, Mechatronics and Energy, 2019, pp. 1–6.
M.Z.M. Alie and S.I. Latumahina “Progressive Collapse Analysis of the Local Elements and Ultimate Strength of a Ro-Ro Ship,” Int. J. Technol., vol. 10, no. 5, pp. 1065–1074, 2019.
Ansys, “ANSYS ACADEMIC RESEARCH MECHANICAL and CFD (perpetual license 1 license).” .
O. F. Hughes & J. K. Paik, Ship structural analysis and design. New Jersey: Society of Naval Architects and Marine Engineers (SNAME)., 2010.
L. Qingdao Evergreen Maritime CO., “YT-6 layer CB/T 3837-1998 Technological Requirements for ship Upgrading or Launching Relaying on Air-Bags Shipbuilidng Industry Standard, PRC.” http://www.evergreen-maritime.com/products/Ship-Launching-Airbags-en3.html.
ISO, Ships and marine technology — Ship launching airbags. 2011.
BKI, Rules for the classification and Construction. Part 1 Seagoing Ship.Volume V Rules for Materials. Jakarta: BKI, 2017.
I. Permana and D. Setyawan, “Analisis Kekuatan Konstruksi Alas Kapal Akibat Grounding,” J. Tek. ITS, vol. 8, no. 2, pp. G151–G158, 2019.
N. A. Dzikron & T. Yulianto, “Analisis Tegangan Haluan Kapal Akibat Tubrukan,” J. Tek. ITS, vol. 8, no. 2, pp. G166–G173, 2019.
S. Ilmiah & A. Zubaydi, “Analisis Tegangan Lambung Kapal Tanker Akibat Tubrukan,” J. Tek. ITS, vol. 8, no. 2, pp. G180–G187, 2019.
DOI: http://dx.doi.org/10.12962/j25481479.v8i2.16737
Refbacks
- There are currently no refbacks.
| |||
|
|
|
|
P-ISSN: 2541-5972
E-ISSN: 2548-1479
IJMEIR journal published by Department of Marine Engineering, Faculty of Marine Technology, Institut Teknologi Sepuluh Nopember Surabaya Indonesia under licenced Creative Commons Attribution-ShareAlike 4.0 International Licence. Based on https://iptek.its.ac.id/index.php/ijmeir/