The Effect of Preheat and Post Weld Heat Treatment On Welding ASTM A 516 Grade 60 Material On Destructive Test Values

Rizqi Jati Alwani; Arif Fadillah

doi:10.12962/j25481479.v8i4.19454

The Effect of Preheat and Post Weld Heat Treatment On Welding ASTM A 516 Grade 60 Material On Destructive Test Values

Rizqi Jati Alwani, Arif Fadillah

Abstract

In the construction of independent tanks (spherical) must be related to welding. Welding itself has a very important role in the process of connecting steel plates. The aims of the research is to determine the effect of the presence or absence of preheat and PWHT on welding and uses ASTM A 516 grade 60 steel material, where the material is commonly used for the construction of tanks or pressure vessels. The steel material is welded by the SMAW (shield metal arc welding) welding process with several different welding variables, one of which is given the preheat and post weld heat treatment (PWHT) variables and the other is not given these variables. Then the material will be tested mechanically, such as bending test, tensile test, and impact test under low temperature conditions (-20^oC). The method used in this research is experimental. From the results of the tests will be known the value of tensile strength and energy absorbed. In the welding test specimen with preheat and PWHT variables, an opening of 1.68 mm was obtained, with an average tensile strength value of 523 N/mm², and an average energy value of 205.15 J. While in the specimen without preheat and PWHT variables, the opening was obtained. of 1.21 mm, with an average tensile strength value of 473.5 N/mm², and an average energy value of 46.7 J.

Keywords

Bending Test; Impact Test; Preheat; Post Weld Heat Treatment; Tensile Test

Full Text:

PDF

References

ASME (American Society of Mechanical Engineers). 2021. Section IX: Qualification Standard for Welding, Brazing, and Fusing Operator, New York.

ASME (American Society of Mechanical Engineers). 2021. Section II: Materials – Part A: Ferrous Material Specifications, New York.

DNV-GL (Det Norske Veritas – Germanischer Lloyd). 2017. Rules For Classification: DNVGL-RU-SHIP Part 5 Chapter 7 - Liquefied Gas Tankers. Norwegia.

IMO (International Maritime Organization). 2016. IGC Code – International Code for the Construction and Equipment of Ships Carring Liquified Gasses in Bulk. London.

Eyres, D, J. dan Bruce, G, J. 2012. Ship Construction. Oxford.

Wiryosumarto, H. dan Okumura, T. 2000. Teknologi Pengelasan Logam. Pradnya Paramita. Jakarta.

Widharto, Sri. 2006. Petunjuk Kerja Las. Pradnya Paramita. Jakarta

Yasfi, A, F, D. 2018. “Analisis Pengaruh Aplikasi Preheat dan Post Weld Heat Treatment pada Pengelasan Aluminium 5083 Propeller Shaft Bracket Menggunakan Metode Mengelasan GMAW terhadap Sifat Mekanis dan Meta,”. Institut Teknologi Sepuluh Nopember. Surabaya.

Meng, C. 2010. “Effect of Preheating Condition on Strength of AA6060 Aluminium Alloy for Extrusion,”. Auckland University of Technology. New Zealand.

Purwaningsih, Y. 2006. “Karakteristik Sifat Fisis dan Mekanis Sambungan Las SMAW Baja A-287 Sebelum dan Sesudah PWHT,”. Jurnal Teknoin. Jakarta.

Naryono dan Suharyadi. 2012. Macam-macam Pengujian NDT. PPPG Teknologi. Bandung.

Faizal, M dan Umam, S. 2018. Analisis Kekuatan dan Kualitas Sambungan Las dengan Variasi Pendinginan Oli dan Udara pada Material ASTM A36 dengan Pengujian NDT (Non Destructive Test). Institut Sains dan Teknologi Nasional. Jakarta.

Herman, Y, A. 2009. Buku Panduan Praktikum Karakterisasi Material I Pengujian Merusak (Destructive Testing). Universitas Indonesia. Depok.

Rahmatika, A. Sutarto, E. Arifin, A, C. 2021. Pengujian Merusak pada Kualifikasi Prosedur Las Plat Baja Karbon SA-36 dengan Proses Pengelasan SMAW berdasarkan Standar ASME Section IX. Jurnal Vokasi Teknologi Industri. Bekasi.

Haryadi, G, D. Ismail, R. dan Haira, M. Pengaruh Post Weld Heat Treatment (PWHT) dengan Pemanas Induksi terhadap Sifat Mekanik dan Struktur Mikro Sambungan Las Shield Metal Arc Welding (SMAW) pada Pipa API 5L X52. Universitas Diponegoro. Semarang.

DOI: http://dx.doi.org/10.12962/j25481479.v8i4.19454