Jacket Structure Design Optimization to Reach Minimum Construction Cost

Aufar Syahmi Fariz Sumardi, Daniel Mohammad Rosyid

Abstract


Offshore jacket structures are essential components in platform construction, requiring optimization due to high material, fabrication, and coating costs. The objective of this research is to achieve cost-effective designs without compromising safety. The methodology employs Sequential Quadratic Programming (SQP) with a surrogate-based approach to optimize structural dimensions, while reliability is assessed using Monte Carlo Simulation to account for uncertainties. Optimization conducted in MATLAB resulted in significant improvements in the dimensional reduction of most design variables, including a 20.32% reduction in total construction costs. Material, fabrication, and coating costs decreased by 19.05%, 28.11%, and 6.14%, respectively. The reliability index (𝛽) of critical members improved to a range of 3.12–3.29, exceeding the safety threshold of 3.09.

Keywords


Jacket Structure; Optimization; Sequential Quadratic Programming; Surrogate Model; Monte Carlo Simulation

Full Text:

PDF

References


M. Dachyar and Sanjiwo, "Business Process Re-Engineering of Engineering Procurement Construction (EPC) Project in Oil and Gas Industry in Indonesia," Indian Journal of Science and Technology, vol. 11, pp. 1-8, 2018.

Silvianita, F. Redana, D. M. Rosyid, D. M. Chamelia and Suntoyo, "Project Delay Analysis on Jacket Structure Construction," Applied Mechanics and Materials, vol. 862, no. August 2014, pp. 315-320, 2017.

M. Aslam, E. Baffoe-Twum and F. Saleem, "Design Changes in Construction Projects - Causes and Impact on the Cost," Civil Engineering Journal, vol. 5, no. 7, pp. 1647-1655, 2019.

S. Zheng, C. Li and Y. Xiao, "Efficient optimization design method of jacket structures for offshore wind turbines," Marine Structures, vol. 89, no. 12, p. 103372, 2023.

A. A. Motlagh, N. Shabakhty and A. Kaveh, "Design optimization of jacket offshore platform considering fatigue damage using Genetic Algorithm," Ocean Engineering, vol. 227, no. March, p. 108869, 2021.

H.-T. Thai, "Machine learning for structural engineering: A state-of-the-art review," Structures, vol. 38, no. 12, pp. 448-491, 2021.

G. Venter, "Review of Optimization Techniques," Encyclopedia of Aerospace Engineering, pp. 1-12, 2010.

S. Zhu, B. Keshtegar, N. Trung, Z. M. Yaseen and D. T. Bui, "Reliability based structural design optimization: hybridized conjugate mean value approach," Engineering with Computers, vol. 37, no. 1, pp. 381-394, 2021.

J. Häfele, R. R. Damiani, R. N. King, C. G. Gebhardt and R. Rolfes, "A systematic approach to offshore wind turbine jacket predesign and optimization: geometry, cost, and surrogate structural code check models," Wind Energy Science, vol. 3, no. 2, pp. 553-572, 2018.

L. Birk, G. F. Clauss and J. Y. Lee, "Practical Application Of Global Optimization To The Design Of Offshore Structures," in 23rd International Conference on Offshore Mechanics and Arctic Engineering, Vancouver, British Columbia, Canada, 2004.

A. Ahrari, A. A. Atai and K. Deb, "Simultaneous topology, shape and size optimization of truss structures by fully stressed design based on evolution strategy," Engineering Optimization ISSN:, vol. 47, no. 8, pp. 1063-1084, 2015.

F. Fu, "Chapter Eight - Design of Offshore Structures," in Design and Analysis of Tall and Complex Structures, Elsevier Ltd, 2018, pp. 251-293.

A. P. I. (API), API Recommended Practice 2A-WSD (RP 2A-WSD), Washington, D.C: American Petroleum Institute, 2002.

M. A. Lotfollahi-Yaghin and H. Ahmadi, "Effect of geometrical parameters on SCF distribution along the weld toe of tubular KT-joints under balanced axial loads," International Journal of Fatigue journal, vol. 32, no. 4, pp. 703-719, 2010.

Y. Yu, M. Wei, J. Yu, Y. Cui, R. Gao, Z. Dong and X. Wang, "Reliability-based design method for marine structures combining topology, shape, and size optimization," Ocean Engineering, vol. 286, no. P1, p. 115490, 2023.

S.-K. Choi, R. V. Grandhi and R. A. Canfiel, Reliability-based Structural Design, London: Springer-Verlag London Limited, 2014.

K. Long, X. Wang and H. Liu, "Stress-constrained topology optimization of continuum structures subjected to harmonic force excitation using sequential quadratic programming," Structural and Multidisciplinary Optimization, vol. 59, no. 5, pp. 1747-1759, 2019.

B. Liu, V. Grout and A. Nikolaeva, "Efficient Global Optimization of Actuator Based on a Surrogate Model Assisted Hybrid Algorithm," IEEE Transactions On Industrial Electronics, vol. 65, no. 7, pp. 5712-5721, 2018.

C. Ren, Y. Aoues, D. Lemosse and E. S. D. Cursi, "Reliability assessment of an offshore wind turbine jacket under one ultimate limit state considering stress concentration with active learning approaches," Ocean Engineering journal, vol. 281, no. May, p. 114657, 2023.

I. Kaymaz, "Application of kriging method to structural reliability problems," Structural Safety, vol. 27, no. 2, pp. 133-151, 2005.

M. K. McWilliam, M. Friis-Møller, N. Pollini, K. Dykes and M. Jensen, "A surrogate model of offshore wind farm support structures for wind farm design and financial valuation," Journal of Physics: Conference Series, vol. 2265, no. 4, 2022.

A. A. Shittu, A. Kolios and A. Mehmanparast, "A systematic review of structural reliability methods for deformation and fatigue analysis of offshore jacket structures," Metals, vol. 11, no. 1, pp. 1-37, 2020.

I. Nabillah and I. Ranggadara, "Mean Absolute Percentage Error untuk Evaluasi Hasil Prediksi Komoditas Laut," Journal of Information System, vol. 5, no. 2, pp. 250-255, 2020.

A. d. Myttenaere, B. Golden, B. L. Grand and F. Rossi, "Mean Absolute Percentage Error for regression models," Neurocomputing, vol. 192, pp. 38-48, 2016.

Y. Bai, Marine Structural Design (Second Edition), The Boulevard, Langford Lane Kidlington, Oxford OX5 IGB, UK: Elsevier Ltd., 2016.




DOI: http://dx.doi.org/10.12962/j25481479.v10i1.22293

Refbacks

  • There are currently no refbacks.


Abstracted / Indexed by:
      
  

 

 

 

 

 

P-ISSN: 2541-5972   

E-ISSN: 2548-1479

 

Lisensi Creative Commons

IJMEIR journal published by  Department of Marine Engineering, Faculty of Marine Technology, Institut Teknologi Sepuluh Nopember Surabaya Indonesia under licenced Creative Commons Attribution-ShareAlike 4.0 International Licence. Based on https://iptek.its.ac.id/index.php/ijmeir/