Analysis Of Stress Distribution Connection System To Knock Down River Ferry

Edi Jadmiko, Irfan Syarif Arief, Cahyo Putro Indro Suseno

Abstract


Musi river is a wide and very long river used by local citizen for the fro. Water transportation remains the choice of local citizen though other infrastructure was built. Hence today, water transportation remains best choice because it has better time compared to landline.. This research aims to get simple solution which is quite good, effective, and quick when needed, then author made Knock Down River Ferry design. Knock Down River Ferry consists of certain size pontoon. Of course this ferry have advantages in moving and assembling. This pontoon can easly assembled in few day and various river width. In this Research there is problem identification and formulation about pontoon joints design of the ferry so force can distributed evenly when receive load.. The analysis process obtained the strength of the lock with the variety conditions of the ships, the largest stress lies on the lock number 10 on the ship moving conditions with a speed of 8 knots for 31.85 MPa with safety factor 8.635 and the lowest on the lock number 1 on the floating condition with stress for 0.91 MPa

Keywords


Pontoon; Knock Down; Load Distribution; Connection System; River Ferry

Full Text:

PDF

References


Adnyani Putri, 2012. Analisa kekuatan Geladak Kapal Tongkang Dengan Pendekatan Ultimate. Surabaya. Teknik Sistem Perkapalan ITS.

Wibawa Ari, 2012. Perancangan KapalTongkang Sebagai Pemyeberangan Masyarakat Disungai Bengawan Solo, Desa Jimbang Kabupaten Blora-Desa Kiringan Kabupaten Bojonegoro. Semarang. Teknik Perkapalan UNDIP

Inge Nefri. (2016). “Perahu Sungai Musi, Riwayatmu Kini”. http://regional.liputan6.com/read/2468250/perahu-motor-sungai-musi-riwayatmu-kini)

Hughes, F, O, Ship Structural Design, John Wiley & Son, New York ,1983

Master Thruster. Hydraulic Outboard Ppropulsion Unit. [PDF]. (https://www.thrustmaster.net/out-drive-propulsion-unit/, diakses 20 Desember 2016)

Nugroho Septyan Adi, 2013. Studi Penetapan Tarif Alur Pelayaran (Channel Fee) : Studi Kasus Sungai Musi. Teknik Kelautan ITS.

Utama Danu, 2013. Perancangan Integrated Tug-Barge (ITB) Pengangkut CNG (Compressed Natural Gas) yang Sesuai Untuk Perairan Sembakung- Nunukan. Surabaya. Teknik Perkapalan.

Watson, David G.M . 1998 . Practical ship Design,Volume I . Oxford, UK : Elsevier Science Ltd.




DOI: http://dx.doi.org/10.12962/j25481479.v2i2.2506

Refbacks

  • There are currently no refbacks.


Abstracted / Indexed by:
      
  

 

 

 

 

 

P-ISSN: 2541-5972   

E-ISSN: 2548-1479

 

Lisensi Creative Commons

IJMEIR journal published by  Department of Marine Engineering, Faculty of Marine Technology, Institut Teknologi Sepuluh Nopember Surabaya Indonesia under licenced Creative Commons Attribution-ShareAlike 4.0 International Licence. Based on https://iptek.its.ac.id/index.php/ijmeir/