Determination of the Optimal Buoy Shape for A Concept Wave Energy Converter to Harness Low Amplitude Sea Waves using Numerical Simulation

Olakunle Kayode; Olufemi Adebola Koya; Titus Oluwasiji Ajewole

doi:10.12962/j25481479.v4i3.5865

Determination of the Optimal Buoy Shape for A Concept Wave Energy Converter to Harness Low Amplitude Sea Waves using Numerical Simulation

Olakunle Kayode, Olufemi Adebola Koya, Titus Oluwasiji Ajewole

Abstract

This research investigates the optimal buoy shape for a conceptual point absorber Wave Energy Converter (WEC) for harnessing low amplitude sea waves characteristic of the Gulf of Guinea coast. It has been established that shape of buoy is one of the main parameter affecting the efficiency of a point absorber WEC. Based on best buoy shapes as reported in literature, two shapes are selected for comparison: cone-cylinder composite buoy and Concave wedge shaped buoy. The WEC’s buoy and the power take off were mathematically modelled as a mass-spring-damper system. The buoys hydrodynamic coefficients were computed using strip theory, while the simulation in the time domain was executed using MATLAB. Impute parameters referred to as the sea states, in five levels, were described by the significant wave height H_s and the corresponding energy period T_e, typical of the gulf. Output parameters are displacement, velocity, acceleration and force of the buoys, as well as the instantaneous power output of the WEC. For the levels considered, the optimum sea state for the two buoys peaked at level 4 (H_s = 1.5 m, T_e = 14 s), with concave wedge buoy having an optimal power output of 8 kW while that of cone-cylinder being 3.7 kW. For the other levels the wedge buoy also consistently gives relatively greater power output than the cone cylinder buoy.

Keywords

Buoy Shape; Low Amplitude Waves; Wave Amplifying Device; Wave Energy Converter

Full Text:

PDF

References

Bosma, B. 'On the Design, Modelling, and Testing of Ocean Wave Energy Converters. Ph.D. dissertation submitted to School of Electrical Engineering and Computer Science, Oregon State University, Corvallis, Oregon, USA; 2013.

Gunn, K., and Stock-Williams, C. ‘Quantifying the Global Wave Power Resources’. Renewable Energy. 2012; 1-9.

Pontes, M., and Falcao, A. 'Ocean energies: Resources and utilisation. In Proceedings of the 18th Congress of the World Energy Council, Buenos Aires, Argentina. 2001.

Emmanuel, A. A and Akinbode, T. (2012) ‘Communal Facilities in Coastal Settlements of Ondo State, Nigeria: Assessment of Community-Based Organisations’ Efforts Using the Facility Contributory Index Model’ British Journal of Education, Society & Behavioural Science 2(2): 150 - 161.

Olufayo, O., Omole, F., and Lawanson, T. (2013). ‘Utilizing Creeks for Integrated Rural Coastal Development of Ilaje Area of Nigeria’. Ethiopian Journal of Environmental Studies and Management 6(3), 294-299

UNEP. Ocean Energy Potential of the West African Region. UNEP Regional Seas Reports and Studies. 1983; no.30.

Falcao, A.F. ‘Wave energy utilization: a review of the technologies’ Renewable Sustainable Energy Rev. (2010) 14(3): 899-918.

Akpınar, A. and Kömürcü, M. I. ‘Wave energy potential along the south-east coasts of the Black Sea’. Energy 42 (2012) 289 – 302.

Beirao, P. and Malca, C. (2014) ‘Design and analysis of buoy geometry for a wave energy converter’ International Journal of Energy and Environmental engineering (Springer) 5: 91-96

Pastor, J., and Liu, Y.-C.: ‘Hydrokinetic energy overview and energy potential for the Gulf of Mexico’. In: IEEE Green Technologies Conference, Tulsa, OK 2012

Kim, J. Koh, H.J. Cho, I.H. Kim, M.H., and Kweon, H.M. ‘Experimental study of wave energy extraction by a dual-buoy heaving system’. International Journal of Naval Architecture and Ocean Engineering 9 (2017) 25-3-4.

Goggins, J. and Finnegan, W. ‘Shape Optimisation of Floating Wave Energy Converters for a Specified Wave Energy Spectrum’. Renewable Energy 71 (2014) 208- 220

Marqués, J., and Torre-Enciso, Y. The Basque Country: A Strategic Commitment to Leading the Wave Energy Sector. 3rd International Conference on Ocean Energy, 6 October, Bilbao, 4 pages.

Michailides, C. and Angelides, C. “Modeling of energy extraction and behavior of a Flexible Floating Breakwater,” Applied Ocean Research, vol. 35, pp. 77–94, 2012.

He, F., and Huang, Z. “Hydrodynamic performance of pile-supported OWC-type structures as breakwaters: An experimental study,” Ocean Engineering, vol. 88, (2014). 618–626

Ning, D., Zhao, X., Goteman, M., and Kang,H. “Hydrodynamic performance of a pile-restrained WEC-type floating breakwater: An experimental study,” Renewable Energy, vol. 95, (2016) 531– 541,

Zheng, S., and Zhang, Y. “Wave diffraction and radiation by multiple rectangular floaters,” Journal of Hydraulic Research, vol. 54, no. 1, (2016) 102–115,

Zhao, X., Ning. D., Zhang, C., Liu, Y., and Kang, H. ‘Analytical Study on an Oscillating Buoy Wave Energy Converter Integrated into a Fixed Box-Type Breakwater’. Mathematical Problems in Engineering Volume 2017, Article ID 3960401, 9 pages. https://doi.org/10.1155/2017/ 3960401

Brooks, J. Elsevier Ocean Engineering Book Series; Wave Energy Conversion. Elsevier, Amsterdam; 2003.

Madhi, F., Sinclair, M. E., and Yeung, R. W. The Berkeley Wedge: an Asymmetrical Energy-capturing Floating Breakwater of High Performance. Marine Systems & Ocean Technology. (2014); 9 (1): 5-16.

Hardisty, J. Experiments with Point Absorbers for Wave Energy Conversion. Journal of Marine Engineering and Technology. (2012); 11(1): 51-62.

Sarlak, H., Seif, M. S., and Abbaspour, M. Experimental Investigation of Offshore Wave Buoy Performance. Journal of Marine Engineering. (2010); 6(11), 1-11.

Aderinto, T. and Li, H. Ocean Wave Energy Converters: Status and Challenges. Energies. (2018); 11, 1250; 1-26.

De Backer, G. Hydrodynamic Design Optimization of Wave Energy Converters Consisting of Heaving Point Absorbers. PhD thesis, Faculty of Engineering, Ghent University, Netherlands; 2009.

Wacher, A. and Nielsen, K. Mathematical and Numerical Modelling of The Aqua BuOY Wave Energy Converter. Mathematics-In-Industry Case Studies. (2010); 2: 16-33.

Engstrom, J. Hydrodynamic Modelling for a Point Absorbing Wave Energy Converter. Ph.D. dissertation, Uppsala University, Sweden; 2011.

Pastor, J. and Liu, Y. Frequency and Time Domain Modelling and Power Output for a Heaving Point Absorber Wave Energy Converter. International Journal of Energy, Environment and Engineering. (2014); 5:101.

Kim, M. H., and Cho, H. I. A Novel Wave Energy Converter using Relative Motions between Buoy, Submerged Buoy, and Inner Dynamic System. Proceedings of the 1st Marine Energy Technology Symposium METS13.April 10-11, 2013, Washington, D.C.

Lewis, T. M. A Remotely Operated, Autonomous Wave Energy Converter System. Ph.D. Dissertation Department of Electrical and Computer Engineering Oregon State University, Oregon, USA; 2014.

Journee, J. M. J. Quick strip theory calculations in ship design. PRADS’92Conference on Practical Design of Ships and Mobile Structures, January, 1992, Newcastle upon Tyne, UK.

Falnes, J. Ocean Waves and Oscillating Systems. Cambridge University Press, Cambridge, UK; 2002

Falcao, A.F. Modelling and controlled of Oscillating body wave energy converters with hydraulic power take off and gas accumulator. Ocean engineering. (2007); 34, 2021- 2032.

Hagerman, G., and Bedard, R. Guidelines for Preliminary Estimation of Power Production by Offshore Wave Energy Conversion Devices, EPRI; 2003

Waters, R., Rahm, M., Svensson, O., Stromstedt, E., Bostrom, C., Sundberg, J., and Leijon, M. Ocean wave energy absorption in response to wave period and amplitude- offshore experiments on a wave energy converter. IET Renewable Power Generation. (2011)5: 465-469.

DOI: http://dx.doi.org/10.12962/j25481479.v4i3.5865