The Effect of Blend Fuel Waste Plastic and Waste Cooking Oil on Diesel Engine Performance based on Simulation

Aguk Zuhdi M. Fathallah; Adhi Iswantoro; A Karomur Roziq F

doi:10.12962/j25481479.v5i3.7635

The Effect of Blend Fuel Waste Plastic and Waste Cooking Oil on Diesel Engine Performance based on Simulation

Aguk Zuhdi M. Fathallah, Adhi Iswantoro, A Karomur Roziq F

Abstract

Nowadays, polypropylene plastics are very often found and cause various environmental problems. Though it is known that along with polypropylene itself comes from propylene monomers obtained from refining petroleum. Besides the use of waste cooking, biodiesel fuel has many drawbacks, one of which is power and fuel consumption. Mixing polypropylene plastic waste for reuse with waste cooking oil biodiesel is an option. This study uses five variations of fuel, namely HSD, B30, C20, C30, and C40, a combination of HSD, waste cooking, and polypropylene. This research is based on experiments to analyze the impact of using these five variations of fuel on the performance diesel engines based on simulation. The performance of the diesel engine would be measured to SFOC, power, and torque produced by each fuel. Based on the results of the analysis of the performance of the diesel engine performance of C20, fuel can be the most optimum alternative fuel to the substitute B30, producing 6.0 kW of power, 238gr / kWh of SFOC, and 31.7Nm of torque.

Full Text:

PDF

References

Atsonios, K., Kougioumtzis, M.A., Panopoulos, K.D., and Kakaras, E., 2015. Alternative thermochemical routes for aviation biofuels via alcohols synthesis: process modeling, techno-economic assessment, and comparison. Applied Energy, 138, pp.346-366.

Sadef, Y., Nizami, A.S., Batool, S.A., Chaudary, M.N., Ouda, O.K.M., Asam, Z.Z., Habib, K., Rehan, M. and Demirbas, A., 2016. Waste-to-energy and recycling value for developing integrated solid waste management plan in Lahore. Energy Sources, Part B: Economics, Planning, and Policy, 11(7), pp.569-579.

Nurdianto, P., Nugraheni, I.K. and Ivana, R.T., 2016. Pengujian Bahan Bakar Biofull Hasil Pirolisis Botol Plastik Pada Sepeda Motor. Jurnal Elemen, 3(1), pp.01-06.

Demirbas, A., 2015. Pyrolytic distillation of No. 4 fuel oil. Petroleum Science and Technology, 33(17-18), pp.1611-1618.

Raheman, H., Jena, P.C. and Jadav, S.S., 2013. Performance of a diesel engine with blends of Biodiesel (from a mixture of oils) and high-speed diesel. International Journal of Energy and Environmental Engineering, 4(1), p.6.

Rifaldi, 2018. produksi bahan bakar cair dari limbah plastik pp dan ko-reaktan minyak jelantah menggunakan metode konversi katalitik, Departemen Kimia. Fakultas Sains. Institut Teknologi Sepuluh Nopember, Surabaya.

Gamma Technologies, 2016, Engine Performance Application Manual, Westmont: Gamma Technologies LLC.

National Institute of Standard and technology, “Isothermal Properties for Propylene,” 11 8 2020. [Online]. Available:https://webbook.nist.gov/cgi/fluid.cgi?TUnit=K&PUnit=MPa&DUnit=mol%2Fl&HUnit=kJ%2Fmol&WUnit=m%2Fs&VisUnit=uPa*s&STUnit=N%2Fm&Type=IsoTherm&RefState=DEF&Action=Page&ID=C115071.

McCrady, J.P., Hansen, A.C. and Lee, C.F., 2007. Modeling biodiesel combustion using GT-Power. In 2007 ASAE annual meeting (p. 1). American Society of Agricultural and Biological Engineers.

pertamina, 2006, Pertamina Industrial Fuel Pertamina dex, Pertamina industrial Fuel marketing, jakarta,.

A. H. Muwaffaq, 2016, Prediksi Performa Marine Diesel 4, Surabaya: Departemen Teknik Sistem Perkapalan, Fakultas Teknologi Kelautan, Institut teknologi Sepuluh Nopember, Surabaya.

DOI: http://dx.doi.org/10.12962/j25481479.v5i3.7635