NUMERICAL ANALYSIS STUDY OF THE EFFECT GEOPOLYMER CONCRETE COMPRESSIVE STRENGTH ON DUCTILITY OF REINFORCED CONCRETE BEAMS
Abstract
Keywords
Full Text:
PDFReferences
Loubana EI Atasi, “Environmental Impact Assessment for Sustainable Cement Production By Loubana EI Atasi A thesis submitted in partial fulfilment of the requirements of Edinburgh Napier University for the award of Doctor of Philosophy,” no. March, 2013.
M. M. A. B. Abdullah, L. Y. Ming, H. C. Yong, and M. F. M. Tahir, “Clay-Based Materials in Geopolymer Technology,” Cem. Based Mater., 2018, doi: 10.5772/intechopen.74438.
A. R. G. N. Elson, “E Arly P Hase S Trength D Evelopment : and,” vol. 21, no. 4, pp. 1113–1116, 2007, doi: 10.1146/annurev.psych.55.090902.141913.
H. Li, G. Liu, and Y. Cao, “Content and distribution of trace elements and polycyclic aromatic hydrocarbons in fly ash from a coal-fired CHP plant,” Aerosol Air Qual. Res., vol. 14, no. 4, pp. 1179–1188, 2014, doi: 10.4209/aaqr.2013.06.0216.
N. Ranjbar, M. Mehrali, M. Mehrali, U. J. Alengaram, and M. Z. Jumaat, “High tensile strength fly ash based geopolymer composite using copper coated micro steel fiber,” Constr. Build. Mater., vol. 112, pp. 629–638, 2016, doi: 10.1016/j.conbuildmat.2016.02.228.
M. H. Al-Majidi, A. Lampropoulos, A. Cundy, and S. Meikle, “Development of geopolymer mortar under ambient temperature for in situ applications,” Constr. Build. Mater., vol. 120, pp. 198–211, 2016, doi: 10.1016/j.conbuildmat.2016.05.085.
P. Duxson, A. Fernández-Jiménez, J. L. Provis, G. C. Lukey, A. Palomo, and J. S. J. Van Deventer, “Geopolymer technology: The current state of the art,” J. Mater. Sci., vol. 42, no. 9, pp. 2917–2933, 2007, doi: 10.1007/s10853-006-0637-z.
P. K. Sarker, “Bond strength of reinforcing steel embedded in fly ash-based geopolymer concrete,” Mater. Struct. Constr., vol. 44, no. 5, pp. 1021–1030, 2011, doi: 10.1617/s11527-010-9683-8.
P. Sarker, “Bond Strengths of Geopolymer and Cement Concretes,” Adv. Sci. Technol., vol. 69, pp. 143–151, 2010, doi: 10.4028/www.scientific.net/ast.69.143.
T. W. Cheng and J. P. Chiu, “Fire-resistant geopolymer produced by granulated blast furnace slag,” vol. 6875, no. March 2003, 2018, doi: 10.1016/S0892-6875(03)00008-6.
P. K. Sarker, R. Haque, and K. V. Ramgolam, “Fracture behaviour of heat cured fly ash based geopolymer concrete,” Mater. Des., vol. 44, pp. 580–586, 2013, doi: 10.1016/j.matdes.2012.08.005.
P. and Paulay, “Reinforced Concrete Structures Park and Paulay.” 1974.
D. Hardjito and B. V Rangan, “Development and Properties of Low-calcium Fly Ash Based Geopolymer LOW-CALCIUM FLY ASH-BASED GEOPOLYMER CONCRETE By Faculty of Engineering Curtin University of Technology,” no. January, p. 48, 2005.
L. Jendele, V. Červenka, and J. Červenka, “ATENA Program Documentation Part 1 Theory,” 2018.
V. Červenka, “ATENA Program Documentation Part 1 Theory,” 2020.
A. Noushini, F. Aslani, A. Castel, R. I. Gilbert, B. Uy, and S. Foster, “Compressive stress-strain model for low-calcium fly ash-based geopolymer and heat-cured Portland cement concrete,” Cem. Concr. Compos., vol. 73, no. July, pp. 136–146, 2016, doi: 10.1016/j.cemconcomp.2016.07.004.
A. A. Mohammed, “Survey of Mechanical Properties of Geopolymer Concrete : A Comprehensive Review and Data Analysis,” 2021.
M. Elchalakani, A. Karrech, M. Dong, M. S. Mohamed Ali, and B. Yang, “Experiments and Finite Element Analysis of GFRP Reinforced Geopolymer Concrete Rectangular Columns Subjected to Concentric and Eccentric Axial Loading,” Structures, vol. 14, no. 2017, pp. 273–289, 2018, doi: 10.1016/j.istruc.2018.04.001.
Z. P. Bažant and E. Becq-Giraudon, “Statistical prediction of fracture parameters of concrete and implications for choice of testing standard,” Cem. Concr. Res., vol. 32, no. 4, pp. 529–556, 2002, doi: 10.1016/S0008-8846(01)00723-2.
D. Darwin, “Tension development length and lap splice design for reinforced concrete members,” pp. 210–225, 2005, doi: 10.1002/pse.206.
M. Albitar, P. Visintin, M. S. M. Ali, O. Lavigne, and E. Gamboa, “Bond Slip Models for Uncorroded and Corroded Steel Reinforcement in Class-F Fly Ash Geopolymer Concrete,” pp. 1–10, 2016, doi: 10.1061/(ASCE)MT.1943-5533.0001713.
T. T. Tran, T. M. Pham, and H. Hao, “Experimental and analytical investigation on fl exural behaviour of ambient cured geopolymer concrete beams reinforced with steel fi bers,” Eng. Struct., vol. 200, no. September, p. 109707, 2019, doi: 10.1016/j.engstruct.2019.109707.
T. Asce et al., “FEMA 356 Prestandard November 2000,” no. November, 2000.
DOI: http://dx.doi.org/10.12962/j20861206.v37i1.12193
Refbacks
- There are currently no refbacks.
Journal of Civil Engineering is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.