MODIFIED FIXED-ANGLE STRUT-AND-TIE MODEL FOR HIGH STRENGTH REINFORCED CONCRETE BEAMS
Abstract
Keywords
Full Text:
PDFReferences
Hsu, T. T. C., “Nonlinear Analysis of Concrete Membrane Elements,” ACI Structural Journal, V. 88, No. 5, 1991, pp. 552-561.
Pang, X. B.; and Hsu T. T. C., “Behavior of Reinforced Concrete Membrane Elements in Shear,” ACI Structural Journal, V. 92, No. 6, Nov.-Dec. 1995, pp. 665-679.
Hsu, T. T. C., “Unified Theory of Reinforced Concrete,”CRC Press, Boca Raton, Florida, 1993.
Pang, X. B.; and Hsu, T. T. C., “Fixed-Angle Softened-Truss Model for Reinforced Concrete”, ACI Structural Journal, V. 93, No. 2, Mar.-Apr. 1996, pp. 197-207.
Hsu T. T. C; and Zhang, L. X., “Nonlinear Analysis of Membrane Elements by Fixed-Angle Softened-Truss Model,” ACI Structural Journal, V. 94, No. 5, Sept.- Oct.1997, pp. 483-492.
Zhang, L. X.; and Hsu, T. T. C., “Behavior and Analysis of 100 MPa Concrete Membrane Elements,” Journal of Structural Engineering, ASCE, V. 124, No. 1, Jan. 1998, pp. 24-34.
Aoyagi, Y.; and Yamada, K., “Strength and Deformation Characteristics of Reinforced Concrete Shell Elements Subjected to In-plane Forces,” Proc. of JSCE, No. 331, 1983, pp. 167-180.
Kupfer, H. B.; Hilsdorf, H. K.; and Rusch, H., “Behavior of Concrete under Biaxial Stresses,” ACI Journal, V. 66, No. 8, Aug. 1969, pp. 656-666.
Belarbi, A.; and Hsu, T. T. C., “Constitutive Laws of Softened Concrete in Biaxial Tension-Compression,” ACI Structural Journal, V. 92, No. 5, Sept.-Oct. 1995, pp. 562-573.
Belarbi, A.; and Hsu, T. T. C., “Constitutive Laws of Concrete in Tension and Reinforcing Bars Stiffened by Concrete,” ACI Structural Journal, V. 91, No. 4, July-Aug. 1994, pp. 465-474.
Zhu, R. H.; Hsu, T. T. C.; and Lee, J. Y., “Rational Shear Modulus for Smeared-Crack Analysis of Reinforced Concrete,” ACI Structural Journal, V. 98, No. 4, July-Aug. 2001, pp. 443-450.
Bazant, Z. P.; and Gambarova, P. M., “Rough Cracks in Reinforced Concrete,” Journal of the Structural Division, Proc. of the ASCE, V. 106, No. ST4, Apr. 1980, pp. 819-842.
Paulay, T.; and Loeber, P. J., “Shear Transfer by Aggregate Interlock,” ACI Special Publication SP-42, Detroit, 1974, pp.1-15.
Daschner, F.; and Kuper, H., “Test on Shear Transfer across Cracks in Normal and Light Concrete,” Bauingenieur, 57, 1982, pp. 57-60.
CEB-FIP Model Code MC90, Committee Euro-International du Beton, Bulletin s’information Nos. 195 and 196, Mar. 1990, pp. 348.
Utescher, G.; and Herrmann, M., “Versuche zur Ermittlung der Tragfahigkeit in Beton eingespannter Rundsstahldollen aus nichtrostendem austenitisschem Stahl,” Deutscher Ausschuss fur Stahkbton, Willhelm Ernst und Sohn, Heft 346, Berlin, 1983, pp. 49-104.
Vecchio, F. J.; and Collins, M. P., “The Modified Compression-Field Theory for Reinforced Concrete Elements Subjected to Shear,” ACI Structural Journal, V. 83, No. 2, Mar.-Apr. 1986, pp. 219-231.
Baumann, T.; and Rusch, H., “Versuche zum Studium der Verdubelungswirkung der Biegezugbewehrung eines Stahlbetonbalkes,” Wilhelm Ernst und Sohn, Deutscher Ausschuss fur Stahlbeton, Heft 210, Berlin, 1970.
Walraven, J.; and Lehwalter, N., “Size Effects in Short Beams Loaded in Shear,” ACI Structural Journal, V. 91, No. 5, Sep.-Oct. 1994, pp. 585-593.
DOI: http://dx.doi.org/10.12962/j20861206.v29i1.1734
Refbacks
- There are currently no refbacks.
Journal of Civil Engineering is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.