Application of Non-Linear Fiber Section Model on Spun Piles With and Without Concrete Infill Subjected to Cyclic Loading

Estu Ema Apriliana, Candra Irawan, Priyo Suprobo

Abstract


This numerical analysis study predicts the behavior of spun piles with and without concrete infill under cyclic flexural loading and constant axial load. A fiber section using STKO pre- and post-processor for the OpenSEES program was employed. Spun piles were modeled using displacement-based beam-column elements with distributed plasticity and cyclic loading procedures with displacement control. The numerical method proposed for this research was verified by comparing it to reliable experimental results.


Keywords


Spun pile, fiber section, distributed plasticity, cyclic loading

Full Text:

PDF

References


A. M. Budek, G. Benzoni, and M. J. N. Priestley, “Experimental Investigation of Ductility of In-Ground Hinges in Solid and Hollow Prestressed Piles,” Structural Systems Research, University of California, 1997.

A. Budek and G. Benzoni, “Obtaining ductile performance from precast prestressed concrete piles,” PCI Journal, vol. 54, no.3, pp. 64-30, June 2009.

C. Irawan, R. Djamaluddin, I. G. P. Raka, Faimun, P. Suprobo, and Gambiro, “Confinement behavior of spun pile using low amount of spiral reinforcement - An experimental study,” International Journal on Advanced Science, Engineering and Information Technology, vol. 8, no. 2, pp. 501–507, 2018, doi: 10.18517/ijaseit.8.2.4343.

T. H. Han, N. H. Lim, S. Y. Han, J. S. Park, and Y. J. Kang, “Nonlinear concrete model for an internally confined hollow reinforced concrete column,” Magazine of Concrete Research, vol. 60, no. 6, pp. 429–440, Aug. 2008.

C. Irawan, P. Suprobo, I. G. P. Raka, and R. Djamaluddin, “Kontribusi Beton Pengisi Terhadap Peningkatan Kinerja Tiang Pancang Spun Pile Akibat Beban Lateral Siklik dan Aksial Tekan,” Doctoral thesis, Institut Teknologi Sepuluh November, Surabaya, 2019.

S. Popovics, “A numerical approach to the complete stress-strain curve of concrete,” Cement and Concrete Research, vol. 3, no. 5, pp. 583–599, Sep. 1973.

M. Petracca, F. Candeloro, and G. Camata, “STKO user manual.” ASDEA Software Technology, Pescara, Italy, 2017.

J. B. Mander, M. J. N. Priestley, and R. Park, “Theoretical Stress-Strain Model For Confined Concrete,” Journal of Structural Engineering, vol. 114, no. 8, Aug. 1988.

C. Irawan, P. Suprobo, Faimun et. al, “Studi Geser Friksi Sambungan Tiang Pancang Spun Pile dengan Pile Cap,” Institut Teknologi Sepuluh November, Surabaya, June 2013.

S. Mazzoni, F. McKenna, M. H. Scott, and G. L. Fenves, “OpenSees Command Language Manual.” Open System for Earthquake Engineering Simulation (OpenSees), July 2006.

J. C. Sunil and P. Kamatchi, “Nonlinear modelling strategies for seismic performance evaluation of reinforced concrete structures,” in Materials Today Proceedings, vol. 65, no.3, Mar. 2022.

S. Li, C.-H. Zhai, and L.-L. Xie, “Evaluation of Displacement-Based, Force-Based and Plastic Hinge Elements for Structural Non-Linear Static Analysis,” Advances in Structural Engineering, vol. 15, no. 3, pp. 477-488, Mar. 2012.

D. C. Kent and R. Park, “Flexural members with confined concrete,” Structural Division, pp. 1964–1990, 1971.

J. Coleman and E. Spacone, “Localization Issues in Force-Based Frame Elements,” Journal Of Structural Engineering, vol. 127, no. 11, Nov. 2001.

Shamim. A. Sheikh and Shafik. S. Khoury, “Confined Concrete Columns with Stubs,” ACI Structural Journal, vol. 90, no. 4, pp. 414–430, 1993.




DOI: http://dx.doi.org/10.12962/j20861206.v39i1.19812

Refbacks

  • There are currently no refbacks.



Journal of Civil Engineering is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

View My Stats