FINITE ELEMENT ANALYSIS FOR DESIGN OF PLATE FOR FRACTURED FEMUR
Abstract
Keywords
Full Text:
PDFReferences
A.A. Oshkour, N.A. Osman, Y.H. Yau, F. Tarlochan and W.A.B. Wan Abas, Design of new generation femoral prostheses using functionally graded materials: a finite element analysis. Proceedings of the institution of mechanical engineers, part H. Journal of Engineering in Medicine 227(1) (2013) 3-17.
C. Colton and J. Orson, Plates─Form and function, AOT Trauma ORP Handout (2020) 1-12.
D.W. Hohman, J. Affonso, J. Budny and M.J. Anders, Calcaneal Plate Fixation of Distal Femoral Fractures, American Journal of Orthopedics 41(3) (2012) 140-143.
F.F. Al-Jassir, H. Fouad and O.Y. Alothman, In vitro assessment of Function Graded (FG) artificial Hip joint stem in terms of bone/cement stresses: 3D Finite Element (FE) study, BioMedical Engineering OnLine 12(5) 2013 1-17.
H. Weinans, R. Huiskes and H.J. Grootenboer, Effect of Material Properties of Femoral Hip Components on Bone Remodelling, Journal of Orthopaedic Research 10 (1992) 845-853.
K. Haase and G. Rouhi (2008). Finite Element Analysis of a Fracture Fixation Plate. In Canadian Society for Mechanical Engineering Forum 2008. Ottawa, Canada, 2008.
M. O. Kaman, N. Celik and S. Karakuzu, Numerical Stress Analysis of the Plates Used to Treat the Tibia Bone Fracture, Journal of Applied Mathematics and Physics 2 (2014) 304-309.
M.I.P. Hidayat, B. Ariwahjoedi, S. Parman and T.V.V.L.N. Rao, Meshless local B-spline collocation method for two-dimensional heat conduction problems with nonhomogenous and time-dependent heat sources, Journal of Heat Transfer 139(7) 2017 071302-1 - 071302-11.
N. Syahroni and M.I.P. Hidayat, Numerical Simulation of Welding Sequence Effect on Temperature Distribution, Residual Stresses and Distortions of T-Joint Fillet Welds, Advanced Materials Research 264-265 (2011) 254-259.
P. Chao, B.P. Conrad, D.D. Lewis, M. Horodyskiand A. Pozzi, Effect of plate working length on plate stiffness and cyclic fatigue life in a cadaveric femoral fracture gap model stabilized with a 12-hole 2.4 mm locking compression plate, BMC Veterinary Research 9(125) 2013 1-7.
P.S.R.S. Maharaj, R. Maheswaran and A. Vasanthanathana, Numerical Analysis of Fractured Femur Bone with Prosthetic Bone Plates, Procedia Engineering 64 (2013) 1242 – 1251.
V.D. Waas, M.I.P. Hidayat and L. Noerochim, Finite Element Simulation of Delamination in Carbon Fiber/Epoxy Laminate Using Cohesive Zone Model: Effect of Meshing Variation, Materials Science Forum 964 (2019) 257-262.
DOI: http://dx.doi.org/10.12962/j2746279X.v2i1.11499
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution 3.0 License.