Subsea Gas Pipeline Risk Assessment During Hot Tapping Installation
This paper examines the risk to subsea gas pipeline during hot-tapping installation process. Hot tapping is one method to connect new pipeline to existing pipeline while they remain in service. In this study it is considered that hot tapping is installed using crane barge. To assure the crane barge in steady position, the crane barge is moored by means of mooring chain at several locations. These mooring activities and hot tapping installation possess potential risk to existing subsea facilities. Hence, in general there are two objectives in this study such as: determining the safe distance between mooring chain for and the existing facilities, and performing risk level due to external load that may occurs during installation. The risk level is determined by analyzing frequency and its consequence then will be mapped into risk matrix according to DNV-RP-F107. From mooring distance analysis, the result can be used as a reference for positioning the mooring point of crane barge. Based on the result of risk assessment to facilities, risks due to external load such as dropped anchor, dragged anchor, ship sinking and dropped object are in the as low as reasonably practicable (ALARP) region which mean, in the practical life risks are acceptable as long as the frequency is maintained in the lowest rank.
K. Artana , A. Dinariyana, I. Ariana and K. Sambodho, in Penilaian Risiko Pipa Gas Bawah Laut, Surabaya, Guna widya, 2013, p. 6.
K. Artana , "Risk Assessment of 14” Subsea Gas Pipeline Due to the Development of Jetty at Gresik," 2015.
K. Artana, D. W. Handani , K. Sambodho and E. Pratiwi, "Risiko Pipa Gas Bawah Laut Akibat Pembangunan dan Operasional Dermaga," in Conference of Badan Inovasi Bisnis dan Ventura (BIBV) ITS, Surabaya, 2015.
K. Artana, "Penilaian Resiko Pipa Gas Bawah Laut Ujung Pangkah-Gresik dengan Standard DNV RP F107," Jurnal Teknik Mesin, vol. 1, 2009.
Liu, Hu and Zhang, "Probability Analysis of Damage to Offshore Pipeline by Ship Factors," 2011.
A. Dinariyana, P. D. Setyorini , Masroeri and D. S. Antara, "Penilaian Risiko Pipa dan Kabel Bawah Laut Akibat Penggunaan Mooring Vessel pada Proses Pemasangan Tie-In Spool," in Proceeding of Seminar Nasional Kelautan X, Univ. Hang Tuah, Surabaya, 2015.
S. Chakrabarti , Handbook of Offshore Engineering, USA: Elsevier’s Science, 2005.
DNV-RP-F107, Risk Assessment of Pipeline Protection, 2010.
DNV-OS-E301, Position Mooring, October 2004.
DNV-OS-E302, Offshore Mooring Chain, October 2009.
Lloyd, Lloyd’s Casualty Data Register based in the UK, Referred from, HESS Project in Pipeline Protection Risk Assessment.
S. Kristiansen, Maritime Transportation – Safety Management and Risk Analysis, Elsevier, 2005.
- There are currently no refbacks.
IPTEK Journal of Science and Technology by Lembaga Penelitian dan Pengabdian kepada Masyarakat, ITS is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at http://iptek.its.ac.id/index.php/jts.