Submissions

Online Submissions

Already have a Username/Password for Journal of Fundamentals and Applications of Chemical Engineering?
Go to Login

Need a Username/Password?
Go to Registration

Registration and login are required to submit items online and to check the status of current submissions.

 

Author Guidelines

Journal of Fundamentals and Applications of Chemical Engineering (JFAChE) publishes original articles on aspects of technology and science disciplines which is related to chemical engineering and specialized areas. Articles are considered for publication with the condition that they have not been published or submitted for publication by other publishers.

Manuscript. The Editorial Board will decide whether a manuscript will be reviewed by reviewers with the criteria of originality, significance, quality, and accuracy. Editorial board authorized to accept, reject, or suggest the authors improve manuscripts. The use of a word processor's styles and layout-editing for manuscript preparation should be kept a minimum to allow the authors to focus on the content and readability of the manuscript.

Therefore, for the reviewing process, the author should submit the manuscript based on the following ms. Word template. 

The camera-ready. all accepted manuscripts will go through copy-editing and layout-editing. Our editing team will prepare the camera-ready version using tex processor. The camera-ready version will be sent to the authors before being published.

Revision. The manuscript suggested to be revised has to be sent to the author along with the suggestion of the reviewer. However, the author can provide rebuttal comments or suggestions.

Language. All manuscripts should be written in English.

Author’s Data, Author's full name (no abbreviation), and author's affiliations (unit, institution, city, and country). For the correspondence author, please add the phone, fax number, and postal address.

Abstract, concise description (not more than 200 words) of the background of the problem, proposed method or the solution and results required. Keywords (not more than 6) should be provided below the abstract. The keywords should be written in title-case and alphabetically ordered.

Formation. For ms. Word file, the manuscript must be typed in single space, 10pt by using A4 paper (210 mm x 297 mm) with the margins of left (2.5 cm), top (2 cm), right and down (1.7 cm). Article must be typed justified formation and first paragraph has to be dragged 0.25 cm to the right side. All paragraphs should not contain indention. Greece symbol has to be original like β (beta), γ (gamma) and etc. The chemical notation has to go with the standard rules, such as BaTiO3 and Mg(OH)2.

The equality, If you write an original research paper, the main body of the paper should be numbered in consecutive order as follow: 1. Introduction, 2. Previous Researches or Related Works, 3. Material and Method, 4. Result and Discussion, 5. Conclusion, Acknowledgment, CRediT, and References. You may present the discussion (analysis) as a separate section. The Acknowledgment section is optional.

If you write a review paper, the main body of the paper should be numbered in consecutive order as follow: 1. Introduction, 2. Related/Previous Work, 3. Research Method, 4. Findings, 5. Discussion, 6. Conclusion, Acknowledgment, and References. The Research Method section should describe (and not limited to) review objectives and research questions, search strategy and criteria, data collection and selection, and methodological quality assessment. The Acknowledgment section is optional.

The introduction section should provide a concise yet complete background of the problem being studied. What is the object of the research? Why it is important. It is important for the author to provide a clear research gap that his study wanted to fill. A clear statement related to the novelty of the study is required.

The manuscript should provide information related to previous researches or related works. This section describes the state of the art solution of a given problem. This section should also contain the research gap of the study with respect to the previous researches or works. It highlights the importance, novelty, and contribution of the study being proposed.

The method (and material) section should provide a detailed description of the method or solution proposed within the study. The originality of the study should be the author's concerned.

The result and discussion section should contain pre-processed data from the proposed method/solution execution. The data can be shown in tables or figures to enable empirical proof of the method/solution. The author may split this section into a result section and discussion (or analysis) section if necessary. The author should emphasize and highlight and interesting results and findings. 

The conclusion section should contain remarks on the result of the study. It also indicates future works.

All pages should be numbered consecutively no less than 7 pages and not more than 20 pages. Tables and Figures should be titled and numbered consecutively in Arabic numerals. For ms.Word file, please place figures and tables on separate sheets at the end of the manuscript. For review purposes, the title of the table or figure is arranged on top of the table or figure. Line art should be submitted in black ink or laser printing, halftone and color should be original and glossy art.

Author Contributions. All published articles should include contribution statements in the work that specifies the contribution of every author in order to promote transparency. These contributions should be listed as a separate file during the submission. The file should be named as "CRediT" and submitted as additional file/supporting information. Some examples are provided as follow:

• All authors contributed to the study conception and material preparation. Study design, data collection, and analysis were performed by [full name], [full name] and [full name]. The outlining and initial draft of the manuscript was done by [full name]. All authors read and approved the final manuscript.

• Conceptualization: [full name], …; Methodology: [full name], …; Formal analysis and investigation: [full name], …; Writing - original draft preparation: [full name, …]; Writing - review and editing: [full name], …; Funding acquisition: [full name], …; Resources: [full name], …; Supervision: [full name],….

References. For the reviewing process, the author may use any referencing style.. If you prepare your manuscript using ms. Word, please use Mendeley as the referencing manager tool in order to maintain consistency.

For the camera-ready version, the author will be asked to provide a valid BibTeX file of the complete reference sources cited in the article. Please make sure that all bibliography sources are complete and accurate. 

Books:
[1] G. O. Young, “Synthetic structure of industrial plastics,” in Plastics, 2nd ed., vol. 3, J. Peters, Ed. New York: McGraw-Hill, 1964, pp. 15–64.
[2] W.-K. Chen, Linear Networks, and Systems. Belmont, CA: Wadsworth, 1993, pp. 123–135.

Periodicals:
[3] J. U. Duncombe, “Infrared navigation—Part I: An assessment of feasibility,” IEEE Trans. Electron Devices, vol.ED-11, pp. 34–39, Jan. 1959.
[4] E. P. Wigner, “Theory of traveling-wave optical laser,”Phys. Rev., vol. 134, pp. A635–A646, Dec. 1965.

Papers Presented at Conferences (unpublished):
[5] D. Ebehard and E. Voges, “Digital single sideband detection for interferometric sensors,” presented at the 2nd Int.Conf. Optical Fiber Sensors, Stuttgart, Germany, 1984.

Standards/Patents:
[6] G. Brandli and M. Dick, “Alternating current fed power supply,” U.S. Patent 4 084 217, Nov. 4, 1978. Technical

Reports:
[7] E. E. Reber, R. L. Mitchell, and C. J. Carter, “Oxygen absorption in the Earth’s atmosphere,” Aerospace Corp.Los Angeles, CA, Tech. Rep. TR-0200 (4230-46)-3, Nov.1968.

To ensure that this study has a state-of-the-art view of the object being studied, we urge the author to ensure that no less than 80% of the reference sources are journal- articles and published within the last 10 years.

Manuscript Template The sample of the manuscript for review purposes and more detailed information can be found on Template (ms Word).

 Final Manuscript. For accepted papers, the author is requested to provide a bibtex version of the references. The accepted papers will be processed into manuscript ready format. 

 

 

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

  1. The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
  2. The submission file is in OpenOffice, Microsoft Word, RTF, or WordPerfect document file format.
  3. Where available, URLs for the references have been provided.
  4. The text is single-spaced; uses a 10-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
  5. The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal.
  6. If submitting to a peer-reviewed section of the journal, the instructions in Ensuring a Blind Review have been followed.
 

Copyright Notice

The Journal of Fundamentals and Applications of Chemical Engineering (JFAChE) Copyright And Consent Form

 

To ensure uniformity of treatment among all contributors, other forms may not be substituted for this form, nor may any wording of the form be changed.  This form is intended for original material submitted to Journal of Fundamentals and Applications of Chemical Engineering and must accompany any such material in order to be published by Journal of Fundamentals and Applications of Chemical Engineering.  Please read the form carefully and keep a copy for your files.

 

TITLE OF PAPER/ARTICLE/REPORT, INCLUDING ALL CONTENT IN ANY FORM, FORMAT, OR MEDIA:

 

 

COMPLETE LIST OF AUTHORS:

COPYRIGHT TRANSFER

1.   The undersigned hereby assigns to Journal of Fundamentals and Applications of Chemical Engineering all rights under copyright that may exist in and to: (a) the above Work, including any revised or expanded derivative works submitted to Journal of Fundamentals and Applications of Chemical Engineering by the undersigned based on the Work; and (b) any associated written or multimedia components or other enhancements accompanying the Work.

 

CONSENT AND RELEASE

1. Hereby grants Journal of Fundamentals and Applications of Chemical Engineering the unlimited, worldwide, irrevocable permission to use, distribute, publish, license, exhibit, record, digitize, broadcast, reproduce and archive, in any format or medium.

2. In connection with the permission granted in Section 2, the undersigned hereby grants Journal of Fundamentals and Applications of Chemical Engineering the unlimited, worldwide, irrevocable right to use his/her name, picture, likeness, voice and biographical information as part of the advertisement, distribution and sale of products incorporating the Work or Presentation, and releases Journal of Fundamentals and Applications of Chemical Engineering from any claim based on right of privacy or publicity.

3. The undersigned hereby warrants that the Work (collectively, the “Materials”) are original and that he/she is the author of the Materials.  To the extent the Materials incorporate text passages, figures, data or other material from the works of others, the undersigned has obtained any necessary permissions.  Where necessary, the undersigned has obtained all third party permissions and consents to grant the license above and has provided copies of such permissions and consents to Journal of Fundamentals and Applications of Chemical Engineering.

4. The paper/article/report have not been published in other journals.

 

GENERAL TERMS

•The undersigned represents that he/she has the power and authority to make and execute this assignment.

•In the event the above work is not accepted and published by the Journal of Fundamentals and Applications of Chemical Engineering or is withdrawn by the author(s) before acceptance by Journal of Fundamentals and Applications of Chemical Engineering, the foregoing copyright transfer shall become null and void and all materials embodying the Work submitted to the Journal of Fundamentals and Applications of Chemical Engineering will be destroyed.

•For jointly authored Works, all joint authors should sign, or one of the authors should sign as authorized agent for the others.

 (1)_______________________________________________                                                              _____________________________

 

               Author/Authorized Agent for Joint Authors                                                                             Date

 

 

JOURNAL OF FUNDAMENTALS AND APPLICATION OF CHEMICAL ENGINEERING COPYRIGHT FORM (continued)

RETAINED RIGHTS/TERMS AND CONDITIONS

General

1. Authors/employers retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.

2. Authors/employers may reproduce or authorize others to reproduce the Work, material extracted verbatim from the Work, or derivative works for the author’s personal use or for company use, provided that the source and the Journal of Fundamentals and Applications of Chemical Engineering copyright notice are indicated, the copies are not used in any way that implies Journal of Fundamentals and Applications of Chemical Engineering endorsement of a product or service of any employer, and the copies themselves are not offered for sale. 

3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.  The Journal of Fundamentals and Applications of Chemical Engineering Intellectual Property Rights office must handle all such third-party requests.

INFORMATION FOR AUTHORS

Author Responsibilities

The JOURNAL OF FUNDAMENTALS AND APPLICATION OF CHEMICAL ENGINEERING distributes its technical publications throughout the world and wants to ensure that the material submitted to its publications is properly available to the readership of those publications. "It is the responsibility of the authors, not the JOURNAL OF FUNDAMENTALS AND APPLICATION OF CHEMICAL ENGINEERING, to determine whether disclosure of their material requires the prior consent of other parties and, if so, to obtain it."  "Statements and opinions given in work published by the JOURNAL OF FUNDAMENTALS AND APPLICATION OF CHEMICAL ENGINEERING are the expression of the authors."

Author/Employer Rights

If you are employed and prepared the Work on a subject within the scope of your employment, the copyright in the Work belongs to your employer as a work-for-hire. In that case, the JOURNAL OF FUNDAMENTALS AND APPLICATION OF CHEMICAL ENGINEERING assumes that when you sign this Form, you are authorized to do so by your employer and that your employer has consented to the transfer of copyright, to the representation and warranty of publication rights, and to all other terms and conditions of this Form.  If such authorization and consent has not been given to you, an authorized representative of your employer should sign this Form as the Author.

JOURNAL OF FUNDAMENTALS AND APPLICATION OF CHEMICAL ENGINEERING Copyright Ownership

It is the formal policy of the JOURNAL OF FUNDAMENTALS AND APPLICATION OF CHEMICAL ENGINEERING to own the copyrights to all copyrightable material in its technical publications and to the individual contributions contained therein, in order to protect the interests of the JOURNAL OF FUNDAMENTALS AND APPLICATION OF CHEMICAL ENGINEERING, its authors and their employers, and, at the same time, to facilitate the appropriate re-use of this material by others.  The JOURNAL OF FUNDAMENTALS AND APPLICATION OF CHEMICAL ENGINEERING distributes its technical publications throughout the world and does so by various means such as hard copy, microfiche, microfilm, and electronic media.  It also abstracts and may translate its publications, and articles contained therein, for inclusion in various compendiums, collective works, databases and similar publications.

 

THIS FORM MUST ACCOMPANY THE SUBMISSION OF THE AUTHOR’S MANUSCRIPT.

Questions about the submission of the form or manuscript must be sent to the publication’s editor.

Please direct all questions about JOURNAL OF FUNDAMENTALS AND APPLICATION OF CHEMICAL ENGINEERING copyright policy to:

JOURNAL OF FUNDAMENTALS AND APPLICATION OF CHEMICAL ENGINEERING Office, Phone +6231 5946240 and Fax +6231 5999282

 

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.

 


Creative Commons License
Journal of Fundamentals and Applications of Chemical Engineering (JFAChE) by Direktorat Riset dan Pengabdian kepada Masyarakat (DRPM), Institut Teknologi Sepuluh Nopember (ITS), Surabaya is licensed under a Creative Commons Attribution 4.0 International License.
Based on a work at https://iptek.its.ac.id/index.php/jts.