Copper Recovery of E-Waste Disposal (SIMCARD) by Using Electro-Generated Chlorine

Prasetyo Chandra, M. Maktum Muharja Al Fajri, Sri Rachmania Juliastuti

Abstract


One method for dissolving Cu from e-waste is to use electro-leaching. The waste used is Simcard and NaCl as electrolytes. Simcard contains copper metal and several other valuable metals such as silver (Ag), gold (Au) and palladium (Pa). The electro-leaching process is carried out in an electrolytic cell reactor where chlorine gas will be produced from the electrolysis process, then chlorine gas will extract the copper contained in the Simcard. This research was conducted by varying the electrode potential (voltage)/electric current (amperes), salt concentration and time. From this research, Simcard contains copper (Cu) by 40.53% and can be separated by electro-leaching method in a stirred acrylic reactor with the best results under operating conditions; a temperature of 30⁰ C, a pressure of 1 atm, a concentration of 10% salt solution, a potential difference of 10 Volts, a leaching time of 60 minutes, and a stirring speed of 600 rpm resulted in a Simcard metal alloy yield of 98.59%.

Keywords


Electro-leaching; Electrode potential; Electric current; E-waste; Simcard

Full Text:

PDF

References


Bennet, J.E. 1980. Electrodes for Generation of Hydrogen and Oxygen from Seawater. International Journal of Hydrogen Energy, 5, 401-408

Chao, G., Hui, W., Jiangang, F., Yi, X., 2011. Liberation characteristic and physical separation of printed circuit board (PCB). Waste Manag. 31, 2161–2166.

Dimitrijevic, M., Antonijevic, M.M., Dimitrijevic, V. Investigation Of The Kinetics Of Pyrite Oxidation By Hydrogen Peroxide In Hydrochloric Acid Solutions, 2, 165-174

Ficeriova J, P. Balaz, E. Boldizarova, R. Kammel. Hydrometallurgy 57 (2000) 85-96

Gramatyka P, R. Nowosielski, P. Sakiewicz. Recycling of Waste Elekctrical and Electronic Equipment. Journal of Achievement in Materials and Manufacturing Engineering. Volume 20 Issues 1-2 January-February 2007

Guimaraes, Yuri F., Iranildes, D Santos, Archilles J.B Dutra. Direct recovery of copper from printed circuit boards (PCBs) powder concentrate by a simultaneous electroleaching–electrodeposition process. Journal Hydrometallurgy 149 (2014) 63-70

H. Majima, Y. Awakura, K. Tsugui, E. Peters. 1990. Fundamental Studies on Chlorine behavior as Related to Zinc Electrowinning from Aqueous Chloride Electrolytes. Metal. Trans 21B (1990) 251-258

Jha, M.K., Kumari, A., Choubey, P.K., Lee, J., Kumar, V., Jeong, J., 2012. Leaching of lead from solder material of waste printed circuit boards (PCBs). Hydrometallurgy 121–124, 28–34.

Kim, Eun-young, Min-seuk Kim, Jae-chun Lee, B.D. Pandey. 2011. Selective Recovery of Gold from Waste Mobile Phone PCBs by Hydrometallurgical Process. Journal of Hazardous Materials, 198, ler206-215

Kristanti, Mike N., Suprapto. 2013. Elektrolisis Larutan Garam Grosok dengan Merkuri dan Polivinil Asetal Komersial (Kanebo) Sebagai Pemisah Anolit Katolit: Perbandingan Kadar Natrium. Jurnal Sains dan Seni Pomits Vol. 2, No. 2, (2013) 2337-3520

Li, J., Duan, H., Yu, K., Liu, L., Wang, S., 2010. Characteristic of low-temperature pyrolysis of printed circuit boards subjected to various atmosphere. Resour. Conserv. Recycl. 54, 810–815.

Lloyd, Lawrie. 2011. Handbook of Industrial Catalyst. New York : Springer Publisher

L.B. Sukla, S.C. Panda And P.K. Jena. Recovery Of Cobalt, Nickel And Copper From Converter Slag Through Roasting With Ammonium Sulphate And Sulphuric Acid. Hydrometallurgy, 16 (1986) 153 – 165.

Moore, J.J.1981.Chemical metallurgy. London: Butterworths.

Muir, W.M. 1976. Novel Polymer Membranes for Reverse Osmosis. England: Babcock & Wilcox Limited

M. Alkan, M. Oktay, M Copur. 2005. Solubility of Chlorine in Aqueous Hydrochloric Acid Solutions. Journal Hazard. Mater. 119 (2005) 13-18

M. Saeedi, E.K.Alamdari, D.Darvishi, Effect of Temperature on dissolution of gold from copper anode slime, 23rd International Mining & exhibition of turkey, 2013.

Neha Lalchandani. “e-scare”. The Times of India. 24 April. 2010.

Nunez, P., and H.K. Hansen. 2013. Electroleaching of Copper Waste with Recovery of Copper by Electrodialysis. E3S Web of Conferences 1, 31003 (2013)

Oishi, T., Koyama, K., Alam, S., Tanaka M., Lee, J.C. 2007. Recovery of High Purity Copper Cathode from Printed Circuit Boards using Ammoniacal Sulfate or Chloride Solutions. Hydrometallurgy 89, 82-88

Rabah, M.A, Nassif N. 1991. Electrochemical Wear of Graphite Anodes and Electrolysis of Brine. Carbon, 29, 165-171

Salamah, Mimi,. Dkk. 2009. Penentuan Kadar Ni, Pb, Co, Fe, Mn, Au dan Cd. Yogyakarta: Laporan Penelitian FMIPA UNY.

Sampad Ghosh, Balram Ambade, Shailesh Kumar PraSsad, Anand K.Choudhary. Simultaneous Extraction of Copper and Iron from Chalcopyrite Concentrates in Hydrochloric Acid Media: Effect of Additives and Temperature. Hydrometallurgy, 1 (2012) 8–13.

Underwood, A. L and R. A. Day, Jr. 2001. Analisis Kimia Kuantitatif. Jakarta: Penerbit Erlangga.

UNEP, 2006. Call for Global Action on E-waste. United Nations Environment Programme (http://www.unep.org.).

Zhu, N.,Xiang, Y.,Zhang, T., Wu, P., Dang, Z., Li, P., Wu, J., 2011. Bioleaching of metal concentrates of waste printed circuit boards by mixed culture of acidophilic bactéria. J. Hazard. Mater. 192, 614–619.

www.web.missouri.edu, accessed 19 Januari 2015 at 13.54 WIB.

www.sciencelab.com. accessed 20 Januari 2015 at 09.36 WIB.

www.metaldetectingworld.com accessed 9 Juni 2015 at 07.02 WIB




DOI: http://dx.doi.org/10.12962/j2964710X.v3i2.13029

Refbacks

  • There are currently no refbacks.


Creative Commons License
Journal of Fundamentals and Applications of Chemical Engineering (JFAChE) by Direktorat Riset dan Pengabdian kepada Masyarakat (DRPM), Institut Teknologi Sepuluh Nopember (ITS), Surabaya is licensed under a Creative Commons Attribution 4.0 International License.
Based on a work at https://iptek.its.ac.id/index.php/jts.