Design of a Sliding PID Controller for The Surge and Roll Motion Control of UNUSAITS AUV

Teguh Herlambang, Hendro Nurhadi

Abstract


The development of underwater vehicle technology is commonly utilized in defences. NKRI needs this technology for applications and multifunctional technology becomes an important thing, since its modernization leads to developed AUV as Republics-of-Indonesia’s main weapon is sea defence. This paper proposes motion control system design applying equation of motion with 2 Degree of Freedom (DOF) to AUV system. The equation of AUV motion with 2-DOF covers surge motion and rolling motion is in the form of nonlinear equation. The control system design applied to the system of UNUSAITS AUV uses method of Sliding Proportional Integral Derivative (SPID). The result of SPID control system with the equation of motion with 2-DOF suggested that the stability of the system was reached when the resulted errors on surge motion and rolling motion were respectively 0.002% and 0.05%.

Keywords


AUV, motion control, Sliding PID

Full Text:

PDF

References


T. Herlambang, H. Nurhadi, and Subchan, “Preliminary numerical study on designing navigation and stability control systems for ITS AUV,” in Applied Mechanics and Materials, vol. 493, 2014, pp. 420–425.

T. Herlambang, E. Djatmiko, and H. Nurhadi, “Ensemble Kalman filter with a square root scheme (enkf-sr) for trajectory estimation of AUV SEGOROGENI ITS,” International Review of Mechanical Engineering (IREME), vol. 9, no. 6, pp. 553–560, 2015.

Z. Ermayanti, E. Apriliani, H. Nurhadi, and T. Herlambang, “Estimate and control position autonomous underwater vehicle based on determined trajectory using fuzzy Kalman filter method,” in International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation (ICAMIMIA), 2015, pp. 156–161.

T. Herlambang, E. Djatmiko, and H. Nurhadi, “Navigation and guidance control system of AUV with trajectory estimation of linear modelling,” in International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation (ICAMIMIA), 2015, pp. 184–187.

C. Yang, “Modular modelling and control for autonomous vehicle (AUV),” Master’s thesis, National University of Singapore, Singapore, 2007.

T. Fossen, “A nonlinear unified state-space model for ship maneuvering and control in a seaway,” International Journal of Bifurcation and Chaos, vol. 15, no. 9, pp. 2717–2746, 2005.

K. Oktafianto, T. Herlambang, Mardlijah, and H. Nurhadi, “Design of autonomous underwater vehicle motion control using sliding mode control method,” in International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation (ICAMIMIA), 2015, pp. 162–166.

T. Herlambang, “Desain sistem kendali gerak surge, sway dan yaw pada autonomous underwater vehicle dengan metode sliding mode control (SMC),” Journal of Mathematics and Its Applications, vol. 14, no. 1, pp. 53–60, 2017.

T. Herlambang, Mardlijah, E. Apriliani, and H. Cordova, “Dynamic sliding mode control (DSMC) untuk sistem kendali water level pada steam drum boiler,” Technology Science and Engineering Journal, vol. 1, no. 1, 2017.

T. Herlambang, H. Nurhadi, and E. Djatmiko, “Optimization of linear model 6-dof in autonomous underwater vehicle,” in National Seminar of Maritime, Sciences and Applied Technology (MASTER), Surabaya, ID, Nov. 2016.




DOI: http://dx.doi.org/10.12962/j24775401.v3i2.2292

Refbacks

  • There are currently no refbacks.



View My Stats


Creative Commons License
International Journal of Computing Science and Applied Mathematics by Pusat Publikasi Ilmiah LPPM, Institut Teknologi Sepuluh Nopember is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://iptek.its.ac.id/index.php/ijcsam.