1.png)
Seakeeping and Safety Assessment of Fishing Vessel 30 GT
Abstract
In Indonesia, many fishing vessels are made from generation to generation in a traditional way. As a result, the ships built did not comply with the regulations and permits of the naval architects. The fishing industry is one of the most dangerous because it works on the high seas. Therefore the performance in hydrodynamics and safety should be evaluated on these traditional vessels. The main objective of this research is to evaluate the hydrodynamic performance and safety of fishing vessels. Following standard specifications or criteria, seakeeping performance is evaluated using Maxsurf Ship Design software. Assessment of existing safety equipment uses IMO (International Maritime Organization) regulations and the Torremolinos protocol. As a result, the ship can only operate at a wave height of 0,1-0,5 meters or undersea state 3. Ship safety inspections reveal that they still do not meet the required requirements and do not have the necessary equipment specified by the World Maritime Organization (IMO).
Keywords
Full Text:
PDFReferences
W. Liu et al., “Designing safe, green and sustainable vessels for Indonesian coastal transport and fishing operations,” in International Conference on Marine Technology, 2017.
Ministry of Maritime Affairs and Fisheries of the Republic of Indonesia
Napitupului, R., Ketut, I.A.P.U, Murdjianto, “Analisa Hambatan dan Seakeeping pada Fast Rescue Vessel”, 2015
R. Irvana, A. Fadillah, and S. Manullang, “Risk Assessment Shipping Accident of Fishing Vessel,” IOP Conf. Ser. Earth Environ. Sci., vol. 557, no. 1, pp. 1–10, 2020, doi: 10.1088/1755-1315/557/1/012028.
W. Haribowo, E. S. Hadi, and Samuel, “Analisa hambatan pada variasi bentuk lambung kapal ikan tradisional catamaran dengan metode cfd,” Kapal UNDIP, vol. 4, no. 1, pp. 64–73, 2016.
W. Liu et al., “Bilge keel design for the traditional fishing vessel of Indonesia’s East Java,” Int. J. Nav. Archit. Ocean Eng., vol. 11, no. 1, pp. 380–395, 2019, doi: 10.1016/j.ijnaoe.2018.07.004.
Mohd Zamani and K.Vijaynathan, “Cultural Influence on Hull Form Geometrical Features of Malaysian Trawler Fishing Boats,” Proc. 7th Int. Mar. Des. Conf., no. May 2000.
M. Z. Ahmad, “The future of traditional wooden fishing boats: the Malaysian perspectives”, “In Regional Conference on Marine Technology for a Sustainable Development in an Archipelago Environment (MARTEC)”, 2000
R. Suzuki, M. Ueno, and Y. Tsukada, “Numerical simulation of 6-degrees-of-freedom motions for a manoeuvring ship in regular waves,” Appl. Ocean Res., vol. 113, no. May, p. 102732, 2021, doi: 10.1016/j.apor.2021.102732
F. Mata-Álvarez-Santullano and A. Souto-Iglesias, “Stability, safety and operability of small fishing vessels,” Ocean Eng., vol. 79, pp. 81–91, 2014, doi: 10.1016/j.oceaneng.2014.01.011.
V. Arslan, R. E. Kurt, O. Turan, and L. De Wolff, “Safety Culture Assessment and Implementation Framework to Enhance Maritime Safety,” Transp. Res. Procedia, vol. 14, no. 0, pp. 3895–3904, 2016, doi: 10.1016/j.trpro.2016.05.477.
O. Turan et al., “Can We Learn from Aviation: Safety Enhancements in Transport by Achieving Human Orientated Resilient Shipping Environment,” Transp. Res. Procedia, vol. 14, pp. 1669–1678, 2016, doi: 10.1016/j.trpro.2016.05.132.
A. Sayli, A. D. Alkan, R. Nabergoj, and A. O. Uysal, “Seakeeping assessment of fishing vessels in conceptual design stage,” Ocean Eng., vol. 34, no. 5–6, pp. 724–738, 2007, doi: 10.1016/j.oceaneng.2006.05.003
D. Molyneux, “NRC Publications Archive Archives des publications du CNRC The Safety of Small Boats ( Including Fishing Boats ) Against Capsize : A Review,” 2007.
A. Sayli, A. D. Alkan, and O. Ganiler, “Non-linear meta-models for conceptual seakeeping design of fishing vessels,” Ocean Eng., vol. 37, no. 8–9, pp. 730–741, 2010, doi: 10.1016/j.oceaneng.2010.02.005.
A. Ben Webster and R. Sampson, “Suitability of Stability Criteria Applied to Small Fishing Vessels and Associated Survivability Report No . 557 Report Control Sheet Report Title : Research Project 557 - Suitability of Stability Criteria Applied to Small Fishing Vessels and Associated Su,” 2006.
A. Maimun, O. Yaakob, M. A. Kamal, and N. C. Wei, “Seakeeping Analysis of a Fishing Vessel Operating in Malaysian Water,” J. Mek., no. 22, pp. 103–114, 2006.
M. Tello Ruiz, R. Silva, and G. Soares, “Fishing Vessels Responses in Waves under Operational Conditions,” in Proceedings of the XXI Naval Architecture Pan-American Conference (COPINAJ/AL’09) (Vol. 18422), 2009.
C. G. Loughran, A. Pillay, J. Wang, A. Wall, and T. Ruxton, “A preliminary study of fishing vessel safety,” J. Risk Res., vol. 5, no. 1, pp. 3–21, 2002, doi: 10.1080/136698702753329135.
M. Tello, S. Ribeiro E Silva, and C. Guedes Soares, “Seakeeping performance of fishing vessels in irregular waves,” Ocean Eng., vol. 38, no. 5–6, pp. 763–773, 2011, doi: 10.1016/j.oceaneng.2010.12.020
Newman,J.N., “The theory of ship motions”, Adv. Appl. Mech. 18, 221–283, 1978
K Hasselmann, Feynman diagrams and interaction rules of wave-wave scattering processes Rev. Geophys, 1966.
Hogben, N. and Lumb, F.E., 1967. Ocean Wave Statistics, HMSO.
A. Kükner and K. Sariöz, “High speed hull form optimisation for seakeeping,” Adv. Eng. Softw., vol. 22, no. 3, pp. 179–189, 1995, doi: 10.1016/0965-9978(95)00016-P.
M. Tello, S. Ribeiro E Silva, and C. Guedes Soares, “Seakeeping performance of fishing vessels in irregular waves,” Ocean Eng., vol. 38, no. 5–6, pp. 763–773, 2011, doi: 10.1016/j.oceaneng.2010.12.020.
McCauley, “Motion Sickness Incidence : Exploratory Studies of Habituation, Pitch, and the Tefinement of A Mathematical Model,” 1976.
K. Sariöz and E. Narli, “Effect of criteria on seakeeping performance assessment,” Ocean Engineering, vol. 32, no. 10, pp. 1161–1173, 2005, doi: 10.1016/j.oceaneng.2004.12.006.
K. Monk, “A War Ship Roll Criterion”, Royal Institute of Naval Architects, 219-240
A. Fadillah, S. Manullang, and R. Irvana, “Stabilitas, Hambatan Dan Olah Gerak Kapal Ikan Multi Purpose Net/Line Hauler 20 Gt Berdasarkan Kajian Ukuran Dan Bentuk Kasko Kapal,” Mar. Fish. J. Mar. Fish. Technol. Manag., vol. 10, no. 2, pp. 117–128, 2019, doi: 10.29244/jmf.v10i2.29313.
DOI: http://dx.doi.org/10.12962/j25481479.v7i2.12507
Refbacks
 |  |  |  |
 |  |  |
|
|
|
|
|
P-ISSN: 2541-5972
E-ISSN: 2548-1479
IJMEIR journal published by Department of Marine Engineering, Faculty of Marine Technology, Institut Teknologi Sepuluh Nopember Surabaya Indonesia under licenced Creative Commons Attribution-ShareAlike 4.0 International Licence. Based on https://iptek.its.ac.id/index.php/ijmeir/