Analysis of Owner Requirements of Purse Seine Vessel 180 GT for Fishing Activities on Fishing Line III-Fisheries Management Area (FMA) 572

Mei Edi Prayitno; Marimin Marimin; Taryono Taryono; Sugeng Hari Wisudo

doi:10.12962/j25481479.v7i2.12881

Analysis of Owner Requirements of Purse Seine Vessel 180 GT for Fishing Activities on Fishing Line III-Fisheries Management Area (FMA) 572

Mei Edi Prayitno, Marimin Marimin, Taryono Taryono, Sugeng Hari Wisudo

Abstract

Fish resources in FMA 572 have not been managed optimally, especially small pelagic species of 82,573 tons. These waters with high wave conditions of 0.2 – 6 meters are located around the waters of West Aceh, the West Indian Ocean of Aceh, the waters of Nias–Sibolga, the waters of the Indian Ocean–West Lampung, and the Sunda Strait. The purpose of this study was to analyze the owner requirements for 180 GT purse seine vessels as a basis for planning the ship's technical specifications. The research method using a single case study with research respondents is purposive sampling. The research findings explain that the Ship dimension is around 35 meters, the Service velocity of 8 knots, the propulsion system is I line engine model, the auxiliary engine system is a dual-engine model, the Fish storage system uses Cargo hold freezer system, and Fishing aids using Fish Aggregating Devices (FADs) and light lamps, Total crew of 27 Personnel, Fish detection equipment using fish finder equipment, Fishing gear pulling with winch mechanical and power block and the ship's operating time 50 days as well. To increase productivity, it is recommended to standardize purse seine vessels with modern equipment to improve fuel efficiency, and ship crew and reduce ship production costs, so that the price of ships is affordable for fishery business actors.

Keywords

Fishbone Diagram; FMA 572; Owner Requirements; Purse Seine

Full Text:

PDF

References

[DGCF] Director General of Capture Fisheries-Ministry of Fisheries and Marine Affairs, "Quota for Fish Resources and Business Quota for Fishing FMA 572," Director General of Capture Fisheries of Indonesian Ministry of Marine Affairs and Fisheries, Jakarta2020.

[MCGA] Meteorology Climatology and Geophysics Council, "Sea Wave Forecast In Indonesia Areas," Indonesian Meteorology, Climatology, and Geophysical Agency, Jakarta2021.

K. Devadasan and M. Boopendranath, "Fishing craft and gear for small pelagics," in National Conference on Marine Fisheries and Fisheries Harbour Infrastructure, 2009, pp. 7-8.

Gulbrandsen. (1988). Small Fishing Craft in Developing Countries – What is the Experience?

M. Baiju, "Basics of designing of fishing vessels," ed: ICAR:: Central Institute of Fisheries Technology, 2019.

P. Wibawa, R. Birmingham, and M. Woodward, "Design of sustainable fishing vessels, future challenges for the Indonesian fisheries," in 12th International Marine Design Conference, 2015, pp. 357-367.

R. K. Yin, Case study research: Design and Methods vol. 5. Thausand Oaks: SAGE Publications, 2009.

G. Thomas, "A typology for the case study in social science following a review of definition, discourse, and structure," Qualitative inquiry, vol. 17, pp. 511-521, 2011.

M. Baiju, P. D. Das, V. Kumar, and K. Sivaprasad, "Standardization of Design of a Commercial Combination Fishing Vessel in India," 2019.

J. W. Creswell, Research design: Qualitative, quantitative, and mixed methods approaches: Sage publications, 2017.

J. H. Varma and S. Lal, "Root cause analysis of newsprint waste using pareto analysis and cause and effect matrix," in IOP Conference Series: Materials Science and Engineering, 2020, p. 012072.

I. Nur and P. J. Suranto, "Design of fishing boat for Pelabuhanratu Fishermen as one of effort to increase production of capture fisheries," in Journal of Physics: Conference Series, 2018, p. 012009.

U. Tangke, S. Deni, and A. Aunaka, "The Influence of using bait types to the number and composition of fishing traps catch in South Ternate waters," in IOP Conference Series: Earth and Environmental Science, 2018, p. 012231.

R. Tejerina, M. Hermida, G. Faria, and J. Delgado, "The purse-seine fishery for small pelagic fishes off the Madeira Archipelago," African Journal of Marine Science, vol. 41, pp. 373-383, 2019.

Decree of the Minister of Marine and Fisheries Affairs Number 86 of 2016 concerning the Productivity of Fishing Vessels, 2016.

O. Lebedev, M. Menzilova, and E. Burmistrov, "Analysis of the use of paint coatings to protect the hull from corrosion," in Journal of Physics: Conference Series, 2021, p. 042048.

M. A. Azis, B. H. Iskandar, and Y. Novita, "Ratio of the main dimensions and static stability traditional Purse seiner in Pinrang," Jurnal Ilmu dan Teknologi Kelautan Tropis, vol. 9, pp. 19-28, 2017.

I. S. Arief, T. B. Musriyadi, and A. D. A. J. Mafera, "Analysis Effect of Duct Length–Nozzle Diameter Ratio and Tip Clearance Variation on the Performance of K-Series Propeller," International Journal of Marine Engineering Innovation and Research, vol. 2, 2020.

I. S. Arief, T. B. Musriyadi, and A. Sahid, "Fluid Flow Analysis of Stern Hull MV. Kelola Mina Makmur 150 GT Based Engine Propeller and Hull Matching Using Actuator Disk Propeller Method," International Journal of Marine Engineering Innovation and Research, vol. 6, 2021.

A. Santoso, I. S. Arief, N. Masro'i, and S. Semin, "Effect of Main Engine Placement and Propeller Shaft Inclination on Ship Performance," International Journal of Marine Engineering Innovation and Research, vol. 6, 2021.

M. Pfaff, "Ship Operating Systems/Auxiliary Systems," in Ship Operation Technology, ed: Springer, 2022, pp. 207-329.

M. A. Abidin, A. Baheramsyah, and E. M. Wardhana, "Cooling System Design for Cold Storage of Traditional Fishing Boat Using Insulation from Rice Husk," International Journal of Marine Engineering Innovation and Research, vol. 3, 2019.

G. Ninan, "Handling, Chilling and Freezing of Fishery Products," ed: ICAR-Central Institute of Fisheries Technology, 2021.

S. Chairunnisa, N. Setiawan, K. Ekawati, A. Anwar, and A. D. Fitri, "Study of AUTO-LION (Automatic Lighting Rumpon) on Fisheries of Stationary Lift Net in Semarang, Central Java," in IOP Conference Series: Earth and Environmental Science, 2018, p. 012052.

R. Irnawati, F. Supadminingsih, D. Surilayani, H. Nurdin, A. Susanto, and A. Hamzah, "Financial Analysis of The Purse Seine Fisheries Business in Panimbang Fishing Port," in IOP Conference Series: Earth and Environmental Science, 2021, p. 012032.

O. A. Misund and A. Aglen, "Swimming behaviour of fish schools in the North Sea during acoustic surveying and pelagic trawl sampling," ICES Journal of Marine Science, vol. 49, pp. 325-334, 1992.

S. Thanasansakorn, T. Thimkrap, and V. T. Sulit, "Upgrading the purse seine fishing vessels to promote responsible Fishing operations: a pilot study in Pattani Province, Thailand," Fish for the People, pp. 18-22, 2019.

M. Lan, C. Ruan, and M. Zhou, "Analysis of Compliance Between Cape Town Agreement and China’s Fishing Vessel Standards," in Green Connected Automated Transportation and Safety, ed: Springer, 2022, pp. 271-274.

H. C. Ririmasse, D. R. Lekatompessy, and A. Tutuhatunewa, "Operational efficiency of 30 GT purse seine fishing equipment," in AIP Conference Proceedings, 2021, p. 050042.

M. Khmel'nyuk and V. Yalama, "Modification of ship's thermal insulation structures in accordance with regulations’ requirements for the frozen products transportation in order to improve refrigeration system efficiency," 2019.

S. Bulatović, V. Aleksić, and B. Zečević, "Corrosion protection of ship structures Zaštita od korozije brodskih konstrukcija," PROCEEDINGS KNJIGA RADOVA, p. 177, 2021.

DOI: http://dx.doi.org/10.12962/j25481479.v7i2.12881