Sesame Oil Addition to Bamboo Reinforced Composite Matrix

Januar Putra Umba Kusairiawan, Akhmad Basuki Widodo, Dwisetiono Dwisetiono, Mochamad Arief Sofijanto

Abstract


Wooden ships use jati wood. Over time jati wood has become scarce. So that jati wood is relatively expensive. therefore bamboo is researched starting from the skin, bamboo meat, and bamboo internodes contained in the plant. In the structure of bamboo there are internodes. The bamboo segment is the weakness of the bamboo structure. The effect of bamboo segments in composite construction was investigated. Sesame oil replaces mineral oil and chemicals, because sesame oil is biodegradable, non-toxic, environmentally friendly, and renewable. To determine the effect of bamboo segments, tensile and bending tests will be conducted on the bamboo composite. The results of this research are expected to find alternative materials, namely bamboo fibre-based composites or so-called bamboo reinforcement plastics (BRP) as materials for making people's ships. This study found that the more layers of bamboo and bamboo segments are very influential in influencing the tensile and bending strength of a laminated material. The tensile testing value of layer 3 with segments reached 127.556 Mpa and without segments 933.333 as well as bending testing layer 3 with segments reached 113.889 Mpa and without segments 111.111 Mpa. From this value, the value has not met the standard of the Indonesian Classification Bureau (BKI).


Keywords


Bamboo Branch; Sesame Oil; Polyester Resin; Tensile Test; Bending Test; Indonesian Classification Bureau (BKI)

Full Text:

PDF

References


Sari, E. N., Ramadhani, A. I., Maknunah, J., Billfath, U., Kelautan, P., & Billfath, U. (2016). Studi Pengaruh Jenis Minyak Nabati terhadap Campuran Bioresin Vinil ester -Minyak Nabati. 215–222.

Biro Klasifikasi Indonesia (1996) Peraturan Konstruksi dan Pembangunan Kapal Kapal Kayu.

Irvantia, W., . I. and Riniarti, M. (2014) ‘Pengaruh Jumlah Ruas Cabang Terhadap Pertumbuhan Setek Bambu Hitam (Gigantochloa Atroviolacea)’, Jurnal Sylva Lestari, 2(1), p. 59. doi: 10.23960/jsl1259-66.

Morisco. 1999. Rekayasa Bambu. Jurusan Teknik Sipil. PAU Universitas Gajah Mada. Yogyakarta.

Amada S, Ichikawa Y, Munelata, Nagase Y and Shimizu H. 1996. Fiber Texture and Mechanical Graded Structure of Bamboo. Dep. of Mechaniccal Engineering, Gumme University. Japan.

Widjaja. S dan Widodo AB. 2004. Karakterisasi Struktur Kapal Kayu dengan Material Alternatif LAMINASI Bambu. Laporan Hasil Akhir Pelaksanaan Penelitian Hibah Bersaing XII (2004-2005) Institut Teknologi Sepuluh Nopember (ITS). Surabaya.

Arsad, E. (2015) ‘Teknologi Pengolahan Dan Manfaat Bambu’, Jurnal Riset Industri Hasil Hutan, 7(1), p. 45. doi: 10.24111/jrihh.v7i1.856.

Aziz, A. R. (2011). Pengendalian Mutu Minyak Wijen. 3–37.

ASTM E-740. 1988. Standard Practice for Fracture Testing With Surface-Crack Tension Specimens. In Annual Book of ASTM Standards, American Society for Testing and Materials, Philadelphia.

ASTM D-3039. 1988. Standard Test Method for Tensile Properties of Fiber-Resin Composites. In Annual Book of ASTM Standards, American Society for Testing and

ASTM D-3552. 1988. Standard Test Method for Tensiled Properties of Fiber- Reinforced Metal Matrix Composites. In Annual Book of ASTM Standards, American Society for Testing and Materials, Philadelphia.




DOI: http://dx.doi.org/10.12962/j25481479.v8i1.16072

Refbacks

  • »


Abstracted / Indexed by:
      
  

 

 

 

 

 

P-ISSN: 2541-5972   

E-ISSN: 2548-1479

 

Lisensi Creative Commons

IJMEIR journal published by  Department of Marine Engineering, Faculty of Marine Technology, Institut Teknologi Sepuluh Nopember Surabaya Indonesia under licenced Creative Commons Attribution-ShareAlike 4.0 International Licence. Based on https://iptek.its.ac.id/index.php/ijmeir/