Modulus of Rupture and Modulus of Elasticity in  Recycling FRP

Tri Nanda Citra Bangun; Nabila Rahmawati; Yopi Novita; Didin Komarudin; Mokhamad Dahri Iskandar; Deni Purnomo; Budhi Hascaryo Iskandar

doi:10.12962/j25481479.v9i4.22006

Modulus of Rupture and Modulus of Elasticity in Recycling FRP

Tri Nanda Citra Bangun, Nabila Rahmawati, Yopi Novita, Didin Komarudin, Mokhamad Dahri Iskandar, Deni Purnomo, Budhi Hascaryo Iskandar

Abstract

Fiber Reinforced Plastic (FRP) material has been widely used as a ship construction alternative to wood. FRP has many advantages such as lightweight material, easy maintenance, weather resistance, economical price, and shorter production time. FRP ship production is weak from the waste factor produced, such as production residue during shipbuilding, ship molds, and FRP shipwrecks. FRP waste can impact the environment, economy, and human health. These impacts include soil pollution, microplastics, skin diseases, and human respiratory disorders. FRP material tends to be burned by many shipyards but still leaves waste in the form of dust. FRP material is difficult to decompose and takes a long time to melt. One strategic effort to minimize the impact of FRP is to recycle FRP. This study aims to reduce FRP waste by making composite boards from FRP waste. The method used was experimental, involving the making of 12 specimens and testing the density, MOR, and MOE. Based on the results of the density value test, the average value obtained follows the JIS A 5905-2003 reference. The MOR and MOE values for each specimen do not comply with the Indonesian Classification Bureau (BKI) standards. In the ANOVA test calculation, no significant differences were obtained for MOR and MOE.

Keywords

FRP waste, FRP composite, Modulus of Elastisity, Modulus of Rupture, Recycling FRP

Full Text:

PDF

References

L. S. Chen. 2020. Discussion on the application of fiberglass reinforced plastics in building energy saving. IOP Conf. Ser. Earth Environ. Sci. 580(1):1–5.doi:10.1088/1755-1315/580/1/012051.

B. Siswandi, Jamal, Jupri, M. Asrofi, and S. Pambudi. " Feasibility study of fiberglass as a substitute for wood in the construction of fishing boats in the coastal area of Bengkalis ". Borobudur Eng. Rev. 1(1), pp. 56–64. 2021

S. Pambudi, M. Asrofi, A. Triono, and M. Z. B. Tsabit, N. A. Murtadho, " Fiberglass boats to support fishing equipment and the tourism sector in Sumberasri Village, Purwoharjo District, Banyuwangi ". SELAPARANG J. Pengabdi. Masy. Berkemajuan. 4(3), pp. 723. 2021.

G. Morcous, Y. Cho, A. El-Safty, and G. Chen, "Structural Behavior of FRP Sandwich Panels for Bridge Decks," KSCE Journal of Civil Engineering, 14(6), pp. 879-888. 2010

H. Sunario, "Non-steel Shipbuilding Technology", PT. PAL Surabaya. 1998

D. Afrianto, Muharnis and Razali, "The process of making a 14 m capacity frp ship for fishermen in bengkalis regency". Inovtek, 4(1), pp. 48-57, 2014

F. Atthoriq, Y. Novita and T. N. C. Bangun, "Strength of FRP Hull Construction of Small Shipyard UD Wahyu Asih Fiberglass, Kebumen-Central Java", Undergraduate Theses. IPB Univeristy, Indonesia. 2023

N. Rahmawati, Y. Novita, D. Komarudin, M. D. Iskandar, "Study of FRP Ship Waste Composite Materials and Its Combustion Residue". International Journal of Marine Engineering Innovation and Research, Vol. 9(1), pp. 146-152. 2024.

N. Rahmawati, Y. Novita, and D. Komarudin, "FRP Compiling Materials and Their Combustion Waste at UD Wahyu Asih Fiberglass Kebumen, Central Java". Undergraduate Theses. 2023

A. V. Boyarintsev. "Polymer and composite piles. international and Russian experience". Soil Mech. Found. Eng. 57(5), pp. 415–421. 2020

B. Das, P. V. Bhave, A. Sapkota, R. M. Byanju, "Estimating emissions from open burning of municipal solid waste in municipalities of Nepal". Waste Manag. 79, pp. 481–490. 2018.

Zulnazri, and R. Dewi, " Comparison of fiber thickness in improving the quality of recycled polypropylene composites by compression molding method". J. Teknol. Kim. Unimal 11. 1(November), pp. 65–78. 2012.

M. R. Asrori, A. Santoso, S. Sumari, Y. F. Prakasa and S. N. Mahmudah, " Processing of fiber waste as a substitute for organic planting media filler material at the WBS fiberglass partner Poncokusum", Indones. J. Soc. Responsib. Vol. 5(01), pp. 11–20, 2023.

J. Chen, Z. Teng and J. Wu, "Recycling of waste FRP and corn straw in wood plastic composite". Polym. Compos, pp. 1–6. 2015.

Y. S. Turker, S. Kilincarslan, "Experimental and numerical investigation of flexural properties of larch beams reinforced with different layer numbers". Revista de la Construcción. Journal of Construction, 23(1), pp. 47-57. 2024

S. Bell, “International Encyclopedia of Human Geography”, 2009

[JSA] Japanese Standard Association, "Japanese Industrial Standard Fiberboard", JIS A 5905. Tokyo: Japanese Standard Association, 2003.

[BKI] Biro Klasifikasi Indonesia, "Guidance for FRP and Wooden Fishing Vessel up to 24 M Consolidated Edition 2022" Jakarta (ID): Biro Klasifikasi Indonesia, 2022.

F. Kollmann and W. Cote, “Principles of Wood Science and Technology”, Volume 1, Solid Wood. Springer-Verlag, New York. 1968.

A. Kasal, H. Efe, and T. Dizel, T, “Determination of the bending strength and modulus of elasticity of solid wood and laminated veneer lumber, Journal of Polytechnic”, 13 (3), pp. 183-190. 2010

J. G. Haygreen, J. Bowyer and R. Shmulsky, “Forest Product and Wood Science, An Introduction Fourth Edition”, United state of America: Low a State Press. 2003.

R. Shmulsky and P. D. Jones “Forest Products and Wood Science An Introduction: Sixth Edition”. Hoboken (US): Wiley-Blackwell. 2011.

L. Bufalino, V. C. S. Albino, V. A. De Sá, A. A. R. Corrêa, L. M. Mendes and N. A. Almeida, "Particleboards made from Australian red cedar: Processing variables and evaluation of mixed-species". J. Trop. For. Sci. 24(2), pp. 162–172, 2012.

M. Zhang, H. Yang,Y. Liu, X. Sun, D. Zhang and D. Xue, “Hydrophobic precipitation of carbonaceous spheres from fructose by a hydrothermal process”. Carbon N. Y. 50(6), pp. 2155–2161. 2012.

Federal Highway Administration (FHWA), “Current practices in FRP composites technology FRP bridge decks and superstructures, completed FRP deck project”. 2008

L. Yu, Y. Li, L. Chen, C. Kang and T. Zhang, “Experimental study on mechanical properties of FRP components and comparison of steel properties”, 5th International Conference on Advanced Design and Manufacturing Engineering (ICADME 2015). pp. 1715-1723. 2015

DOI: http://dx.doi.org/10.12962/j25481479.v9i4.22006