Load Cell Failure Risk in Tandem Mobile Crane Lifting: A Fuzzy Fault Tree Analysis Approach

Fatich Pradana Putra; Priyambodo Nur Ardi Nugroho; Imam Sutrisno

doi:10.12962/j25481479.v10i2.22951

Load Cell Failure Risk in Tandem Mobile Crane Lifting: A Fuzzy Fault Tree Analysis Approach

Fatich Pradana Putra, Priyambodo Nur Ardi Nugroho, Imam Sutrisno

Abstract

Load cell is an critical component in the tandem lifting system using a mobile crane that functions to measure the load accurately. Damage to the load cell can cause operational failure and increase the risk of accidents. This study aims to analyze the potential for load cell damage using the Fuzzy Fault Tree Analysis (FFTA) approach. FFTA combines fault tree logic with fuzzy theory to clarify risk assessment. By collecting data from study literature, interviews and historical equipment data, the analysis results obtained that the factors causing load cell damage include overload factors, damage factors to load cell components and environmental factors. And through the FFTA method, namely the damage factor to the load cell component with a weighting value of 0.1840 or 47%. The contribution of this study is to provide a systematic approach to identifying and evaluating the risk of load cell damage, which can be used as a basis for improving inspection programs and preventive maintenance on tandem lifting using a mobile crane. This approach can also support management decision making in improving the reliability and safety of lifting equipment.

Keywords

fuzzy theory; mobile crane; load cell; overload; risk analysis; safety; tandem lifting

Full Text:

PDF

References

FAD Putri, R. Rajiman, ALC Winarsih, and D. Rahadianto, “Comparison of Efficiency of Tower Crane and Mobile Crane Usage in Multi-Storey Buildings,” INSOLOGI: Jurnal Sains dan Teknologi , vol. 2, no. 3, pp. 643–656, Jun. 2023, doi: 10.55123/insologi.v2i3.2284.

A. SHAPIRA and CJ SCHEXNAYDER, “Selection of mobile cranes for building construction projects,” Construction Management and Economics , vol. 17, no. 4, pp. 519–527, Jul. 1999, doi: 10.1080/014461999371439.

GA Emelianova, CV Kulikova, FA Gulyaev, and YA Batischev, “To the issues of ensuring the stability of jib mobile cranes, taking into account various aspects of their operation,” in IOP Conference Series: Materials Science and Engineering , Institute of Physics Publishing, Mar. 2020. doi: 10.1088/1757-899X/747/1/012109.

I. Lagerev, A. Lagerev, and V. Tarichko, “Modeling the swing of mobile loader cranes with anchor outriggers when operating on weak soils,” in E3S Web of Conferences , EDP Sciences, Nov. 2021. doi: 10.1051/e3sconf/202132600011.

HS Gwak, HC Lee, BY Choi, and Y. Mi, “Ga-based optimization method for mobile crane repositioning route planning,” Applied Sciences (Switzerland) , vol. 11, no. 13, Jul. 2021, doi: 10.3390/app11136010.

B. Zhang, YT Tong, L. Qin, and ZQ Huang, “Research on Wind Disaster Accident of Port Crane,” in E3S Web of Conferences , EDP Sciences, May 2021. doi: 10.1051/e3sconf/202125702050.

NZ Muhamad Zaini, M. Fikri Hasmori, MA Mat Salleh, M. Norazam Yasin, and R. Ismail, “Crane Accidents at Construction Sites in Malaysia,” in IOP Conference Series: Earth and Environmental Science , Institute of Physics Publishing, June. 2020. doi: 10.1088/1755-1315/498/1/012105.

V. Kargar, M. Jahangiri, M. Alimohammadlu, M. Kamalinia, and M. Mirazahossieninejad, “Risk assessment of mobile crane overturning in Asymmetric Tandem Lifting (ATL) operation based on fuzzy fault tree analysis (FFTA),” Results in Engineering , vol. 16, Dec. 2022, doi: 10.1016/j.rineng.2022.100755.

Y. Lin, D. Wu, X. Wang, X. Wang, and S. Gao, “Statics-Based Simulation Approach for Two-Crane Lift,” J Constr Eng Manag , vol. 138, no. 10, pp. 1139–1149, Oct. 2012, doi: 10.1061/(ASCE)CO.1943-7862.0000526.

BJ Yoon, KS Lee, and JH Lee, “Study on overturn proof monitoring system of mobile cranes,” Applied Sciences (Switzerland) , vol. 11, no. 15, Aug. 2021, doi: 10.3390/app11156819.

ED Zisman, “Use of Forensic Engineering to Determine the Cause of a Crane Tip-Over,” in Forensic Engineering 2012 , Reston, VA: American Society of Civil Engineers, Nov. 2012, pp. 763–772. doi: 10.1061/9780784412640.081.

E. Ruijters and M. Stoelinga, “Fault tree analysis: A survey of the state-of-the-art in modeling, analysis and tools,” Feb. 01, 2015, Elsevier Ireland Ltd . doi: 10.1016/j.cosrev.2015.03.001.

KB Misra and GG Weber, “A new method for fuzzy fault tree analysis,” Microelectronics Reliability , vol. 29, no. 2, pp. 195–216, Jan. 1989, doi: 10.1016/0026-2714(89)90568-4.

K. Singh, M. Kaushik, and M. Kumar, “Integrating α-cut interval based fuzzy fault tree analysis with Bayesian network for criticality analysis of submarine pipeline leakage: A novel approach,” Process Safety and Environmental Protection , vol. 166, pp. 189–201, Oct. 2022, doi: 10.1016/j.psep.2022.07.058.

M. Kumar and K. Singh, “Fuzzy fault tree analysis of chlorine gas release hazard in Chlor-Alkali industry using α -cut interval-based similarity aggregation method,” Appl Soft Comput , vol. 125, p. 109199, Aug. 2022, doi: 10.1016/j.asoc.2022.109199.

YA Mahmood, A. Ahmadi, AK Verma, A. Srividya, and U. Kumar, “Fuzzy fault tree analysis: a review of concepts and applications,” International Journal of Systems Assurance Engineering and Management , vol. 4, no. 1, pp. 19–32, March. 2013, doi: 10.1007/s13198-013-0145-x.

H.-H. Kim and G. Lee, “A Quantitative Analysis of Fatal Accidents Related to Cranes Using the FMEA Method,” Journal of the Korean Institute of Building Construction , vol. 7, no. 3, pp. 115–122, Sept. 2007, doi: 10.5345/jkic.2007.7.3.115.

A. Nurroif and D. Retnowati, “Planning Preventive Maintenance of Crane Machines Using Reliability Centered Maintenance (RCM) Method Approach,” Jurnal Teknik Industri , vol. 1, no. 2, p. 111, Dec. 2022, doi: 10.30659/jurti.1.2.111-119.

Rahmatulloh, Suharto, and R. Septiani, “ANALYSIS OF RELIABILITY CENTERED MAINTENANCE (RCM) ON RUBBER TIRE GANTRY CRANE (RTGC) LOADING AND UNLOADING EQUIPMENT AT PT XXX,” Industrika: Jurnal Ilmiah Teknik Industri , vol. 5, no. 2, pp. 63–70, Oct. 2021, doi: 10.37090/indstrk.v5i2.357.

J. Halme and A. Aikala, “Fault tree analysis for maintenance needs,” J Phys Conf Ser , vol. 364, p. 012102, May 2012, doi: 10.1088/1742-6596/364/1/012102.

M. Khodadadi-Karimvand and SI TaheriFar, "Safety Risk Assessment; Using Fuzzy Failure Mode and Effect Analysis and Fault Tree Analysis Transactions on Fuzzy Sets and Systems (TFSS) Safety Risk Assessment; Using Fuzzy Failure Mode and Effect Analysis and Fault Tree Analysis," Journal Pre-proof , vol. 1, no. 2, pp. 2821–0131, 2022, doi: 10.30495/tfss.2022.1954304.1016.

AA Rooney, AL Boyles, MS Wolfe, JR Bucher, and KA Thayer, “Systematic Review and Evidence Integration for Literature-Based Environmental Health Science Assessments,” Environ Health Perspect , vol. 122, no. 7, pp. 711–718, Jul. 2014, doi: 10.1289/ehp.1307972.

N. Farhat, “Systematic review in evidence-based risk assessment,” ALTEX , 2021, doi: 10.14573/altex.2004111.

S. Pandithawatta, S. Ahn, R. Rameezdeen, CWK Chow, and N. Gorjian, “Systematic Literature Review on Knowledge-Driven Approaches for Construction Safety Analysis and Accident Prevention,” Buildings , vol. 14, no. 11, p. 3403, Oct. 2024, doi: 10.3390/buildings14113403.

M. Rantala, M. Lindholm, and S. Tappura, “Supporting Occupational Health and Safety Risk Assessment Skills: A Case Study of Five Companies,” Int J Environ Res Public Health , vol. 19, no. 3, p. 1720, Feb. 2022, doi: 10.3390/ijerph19031720.

A. Beronius and M. Ågerstrand, “Making the most of expert judgment in hazard and risk assessment of chemicals,” Toxicol Res (Camb) , vol. 6, no. 5, pp. 571–577, Sept. 2017, doi: 10.1039/c7tx00114b.

V. R. Renjith, G. Madhu, V. L. G. Nayagam, and A. B. Bhasi, “Two-dimensional fuzzy fault tree analysis for chlorine release from a chlor-alkali industry using expert elicitation,” J Hazard Mater , vol. 183, no. 1–3, pp. 103–110, Nov. 2010, doi: 10.1016/j.jhazmat.2010.06.116.

S. M. Lavasani, A. Zendegani, and M. Celik, “An extension to Fuzzy Fault Tree Analysis (FFTA) application in petrochemical process industry,” Process Safety and Environmental Protection , vol. 93, pp. 75–88, Jan. 2015, doi: 10.1016/j.psep.2014.05.001.

MRM Lavasani, “A archive of SID 30.” [On line]. Available: www.SID.ir

S. Guo and H. Zhao, “Fuzzy best-worst multi-criteria decision-making method and its applications,” Knowl Based Syst , vol. 121, pp. 23–31, Apr. 2017, doi: 10.1016/j.knosys.2017.01.010.

V. Cavalli‐Sforza and L. Ortolano, “Delphi Forecasts of Land Use: Transportation Interactions,” J Transp Eng , vol. 110, no. 3, pp. 324–339, Nov. 1984, doi: 10.1061/(ASCE)0733-947X(1984)110:3(324).

K. Mokhtari, J. Ren, C. Roberts, and J. Wang, “Application of a generic bow-tie based risk analysis framework on risk management of sea ports and offshore terminals,” J Hazard Mater , vol. 192, no. 2, pp. 465–475, Aug. 2011, doi: 10.1016/j.jhazmat.2011.05.035.

MR Alam, SF Hassan, MA Amin, K. Arif-Uz-Zaman, and MA Karim, “Failure Analysis of a Mobile Crane: A Case Study,” Journal of Failure Analysis and Prevention , vol. 18, no. 3, pp. 545–553, Jun. 2018, doi: 10.1007/s11668-018-0437-1.

A. Fahruzi, Marselinus Amalia Lamanele, and Trisna wati, “Design of Prototype Load Moment Indicator on Mobile Crane using Microcontroller based on Lifting Load Chart,” Inform: Scientific Journal of Information and Communication Technology , vol. 7, no. 2, pp. 113–119, Jul. 2022, doi: 10.25139/inform.v7i2.4746.

M. Safaei, M. Hejazian, S. Pedrammehr, S. Pakzad, M. M. Ettefagh, and M. Fotouhi, “Damage Detection of Gantry Crane with a Moving Mass Using Artificial Neural Network,” Buildings , vol. 14, no. 2, p. 458, Feb. 2024, doi: 10.3390/buildings14020458.

R. Kurnia, R. Firdaus, L. Lufti, and MH Anshor, “AUTOMATIZATION OF LOAD CELL SENSORS TO OVERCOME VEHICLE OVERLOAD,” NATIONAL JOURNAL OF ELECTRICAL ENGINEERING , vol. 8, no. 2, p. 81, Aug. 2019, doi: 10.25077/jnte.v8n2.666.2019.

D.-H. Lee, T.-W. Kim, S.-W. Ji, and Y.-B. Kim, “A study on load position control and vibration attenuation in crane operation using sub-actuators,” Measurement and Control , vol. 52, no. 7–8, pp. 794–803, Sept. 2019, doi: 10.1177/0020294019847703.

J. Halme and A. Aikala, “Fault tree analysis for maintenance needs,” J Phys Conf Ser , vol. 364, p. 012102, May 2012, doi: 10.1088/1742-6596/364/1/012102.

N. Xu, K. Di, F. Liu, W. Zhao, and B. Zhang, “Risk Assessment of Lift-Jacking Accidents Using FFTA-FMEA,” Applied Sciences , vol. 13, no. 12, p. 7312, Jun. 2023, doi: 10.3390/app13127312.

DOI: http://dx.doi.org/10.12962%2Fj25481479.v10i2.22951