Scheduling Program Analysis of Pressure Relief Device (PRD) According to RBI API 581 on Production Gas Separator System

Dwi Priyanta, Nurhadi Siswantoro, Muhammad Saifulloh

Abstract


Pressure relief device serves to control and limit the pressure by directing the flow into an additional path. In the process of purification of oil and gas, application of PRD are found in production gas separator system. However, based on API 581, the PRD also has a risk of failure that every oil and gas company needs to conduct regular inspections to ensure the reliability of PRD. One approach to evaluating critically the PRDs for arranging and scheduling programs is to use the risk-based inspection (RBI) method. The RBI is a systematic approach to the method of inspection management of equipment or works unit based on the level of risk that the equipment or work units. Risk assessment for production gas separator system’s PRD has based on API RP 581 third edition.  After knowing the level of risk for PRD, the risk needs to be evaluated. For acceptable risk, it can be used as a reference to determine the next inspection until risk target. Meanwhile, unacceptable risk should be inspected immediately after RBI analysis.

Keywords


failure;inspection management;purification;reliability;risk assessment;risk target

Full Text:

PDF

References


M. Hendra, Analisis Penerapan Metode RBI dalam Pemeriksaan Keselamatan Kerja pada Industri MIGAS, Salambe: UI, 2010.

M. Malek, Pressure Relief Device, USA: McGraw-hill Company,inc, 2006.

A. R. 581, Risk Based Inspection Technology, 3rd edition, Washington,D.C: API Publishing Service, 2016.

D. Arina, Analisis Remaining Life dan Penjadwalan Program Inspeksi pada Pressure Vessel dengan Menggunakan Metode Risk Based Inspection, Surabaya: ITS, 2016.

M. Hellemans, The Safety Valve Handbook, USA: ELSEVIER, 2009.

A. R. 580, Risk-Based Inspection Technology, 3rd edition, Washington,D.C: API Publishing Service, 2016.

H. Devold, Oil and Gas Production Handbook An Introduction to Oil and Gas Production, Transport, Refining and Petrochemical Industry, USA: Etterstad, 2013.

A. R. 576, Inspection of Pressure Relief Device 3rd edition, Washington,D.C: API Publishing Service, 2009.




DOI: http://dx.doi.org/10.12962/j25481479.v3i1.4105

Refbacks

  • There are currently no refbacks.


Abstracted / Indexed by:
      
  

 

 

 

 

 

P-ISSN: 2541-5972   

E-ISSN: 2548-1479

 

Lisensi Creative Commons

IJMEIR journal published by  Department of Marine Engineering, Faculty of Marine Technology, Institut Teknologi Sepuluh Nopember Surabaya Indonesia under licenced Creative Commons Attribution-ShareAlike 4.0 International Licence. Based on https://iptek.its.ac.id/index.php/ijmeir/