Vol 5, No 1 (2021)

DOI: http://dx.doi.org/10.12962/j2580-0914.v4i3

Table of Contents

Covers

COVER PDF
Editor of IJOCE
EDITORIAL TEAM PDF
Editor of IJOCE
CONTENTS PDF
Editor of IJOCE

Articles

Local Stress Analysis in the Chain Link of Mooring Line That Had Diameter Degradation PDF
Rafliansyah Azhar Putera, Eko Budi Djatmiko, Murdjito Murdjito 1-9
Analysis of the Effect of Abrasive Material and Polyurethane Coating Thickness Variations on ASTM A36 Steel Towards Corrosion Rate in Sea Water Environment PDF
Herman Pratikno, Felita Widya Hapsari, Wimala Lalitya Dhanista 10-17
Influence Analysis of Shielding Gas Flow Rate and Purity Level Variation on GMAW Welding Process to Microstructure of Alumunium 5083 PDF
Nur Syahroni, Sadewa Sechan Winando, Yeyes Mulyadi 18-22
Experimental & Numerical Studies of Vertical Motion Acceleration Analysis in Helideck on a Catamaran Floating Crane PDF
Yunan Setiawan Suwandono, Eko Budi Djatmiko, Murdjito Murdjito, Abdul Ghofur 23-28
The Effect Analysis of Coating Thickness Variation and Mixture Composition of Magnesium – Flake Glass on Epoxy Coating on Abrasive Resistance, Adhesion Strength, and Prediction of Corrosion Rate of ASTM A36 Steel Plate PDF
Herman Pratikno, Yudiardana Tridantoko Susarno, Hasan Ikhwani 29-35
Experimental Study and Numerical Analysis of Floating Crane Catamaran Mooring Tension in Intact and Damage Conditions Using Time-Domain Approach PDF
Mochamad Hanif Rafi’i, Eko Budi Djatmiko, Murdjito Murdjito, Erdina Arianti 36-43


Contact:

IJOCE Editor
Department of Ocean Engineering
Institut Teknologi Sepuluh Nopember (ITS)
Kampus ITS - Sukolilo
Surabaya 60111 - Indonesia
Phone/Fax: +62-31-592 8105
e-mail: ijoce@its.ac.id
           ijoce.oe.its@gmail.com

 


International Journal of Offshore and Coastal Engineering by Department of Ocean Engineering is licensed under a Creative Commons Attribution 4.0 International.

  Lisensi Creative Commons

Based on a work at https://iptek.its.ac.id/index.php/ijoce/index.

klik4d