Analisis Numerik Vertical Shear Link (VSL) secara Sub-Assemblage menggunakan Program Bantu ABAQUS
Abstract
Keywords
Full Text:
PDFReferences
BMKG, Katalog Gempabumi Signifikan dan Merusak Tahun 1821 - 2018, Jakarta: Pusat Gempabumi dan Tsunami Kedeputian Bidang Geofisika Badan Meteorologi Klimatologi dan Geofisika, 2019.
N. Madutujuh, “Aspek Penting dan Petunjuk Praktis Dalam Perencanaan Struktur Gedung di Dekat Pusat Gempa,” in Seminar dan Pameran HAKI 2010, 2004.
A. K. Sina and C. Topkaya, “A review of research on steel eccentrically braced frames,” J. Constr. Steel Res. , vol. 128, no. 2017, pp. 53-73, 2017.
J. J. S. Pah and Y. E. Oematan, “Energy Dissipation of Eccentrically Braced Frame (EBF) With Different Level of Eccentricity,” pp. 1-14, 2011.
J. M. Ricles and E. P. Popov, “Inelastic Link Element for EBF Seismic Analysis,” J. Struct. Eng., vol. 120, no. 2, pp. 441-463, 1994.
J. W. M. Rafael and B. Suswanto, “Studi Perilaku Link Pendek, Link Menengah dan Link Panjang pada Struktur Baja Sistem EBF,” J. Civ. Eng., vol. 32, no. 1, pp. 25-31, 2017.
J. Bouwkamp, M. G. Vetr and A. Ghamari, “An analytical model for inelastic cyclic response of eccentrically braced frame with vertical shear link (V-EBF),” Case Stud. Struct. Eng., no. 6, pp. 31-44, 2016.
D. F. Muhammad, “Studi Numerik Performa Rangka Bresing Eksentrik Link Vertikal Profil Tubular,” Jur. Apl. Tek. Sip., vol. 18, no. 1, pp. 95-106, 2020.
M. R. Baradaran, “The Effect of Vertical Shear-Link in Improving the Seismic Performance of Structures with Eccentrically Bracing Systems,” Int. J. Civ. Environ. Eng., vol. 9, no. 8, pp. 1086-1090, 2015.
M. A. Shayanfar, M. A. Barkhordari, A. R. Rezaeian, "Experimental study of cyclic behavior of composite vertical shear link in eccentrically braced frames", Steel. Compos. Struct. vol. 12 pp. 13 ,2012.
R. Montuori, E. Nastri and V. Piluso, 'Theory of plastic mechanism control for the seismic design of braced frames equipped with friction dampers', Mech. Res. Commun. vol. 58 pp. 112–123 ,2014.
S. M. Zahrai, “Cyclic testing of chevron braced steel frames with IPE shear panels,” Steel Compos. Struct., vol. 19, no. 5, pp. 1167-1184, 2015.
AISC, Seismic Provisions for Structural Buildings, Chicago, 2010.
E. M. Paneda and N. A. Fleck, “Crack growth resistance in metallic alloys: the role of isotropic versus kinematic hardening,” J. Apl. Mech., vol. 85, , pp. 111002-1 - 111002-6, 2018.
DOI: http://dx.doi.org/10.12962/j2579-891X.v20i3.13298
Refbacks
- There are currently no refbacks.
Jurnal Aplikasi Teknik Sipil by Pusat Publikasi Ilmiah LPPM Institut Teknologi Sepuluh Nopember is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License
Based on work at https://iptek.its.ac.id/index.php/jats