Comparison of AC-WC Pavement Layers on Asphalt Mixtures with Artificial Rubber Bitumen, Natural Rubber, and Pravulcanized Rubber using the Marshall Test Method

Irwan Chandra Nirwana

doi:10.12962/j2579-891X.v24i1.22085

Comparison of AC-WC Pavement Layers on Asphalt Mixtures with Artificial Rubber Bitumen, Natural Rubber, and Pravulcanized Rubber using the Marshall Test Method

Irwan Chandra Nirwana

Abstract

Road damage can be caused by several factors including failure of the road support structure, asphalt quality, inadequate asphalt content, and mixing and compaction temperatures that do not meet predetermined specifications or standards. Methods to improve quality and minimize asphalt damage can be done by modifying the mixture by adding artificial rubber asphalt, natural rubber, and vulcanized rubber as additives to the asphalt mixture. The research aims to find out how the effect and efficiency of adding variates additives to the asphalt mixture based on the results of marshall testing which refers to the 2018 Bina Marga revision 2 specification. The results of marshall testing obtained asphalt mixture with vulcanized rubber variation produce the best marshall parameter value. Furthermore, the efficiency results obtained by the asphalt mixture with natural rubber variations are the best efficiency materials analyzed for cost, availability, and strength factors

Keywords

Aphalt; Efficiency; Natural Rubber; Marshall;

Full Text:

PDF

References

N. Suaryana and T. S. Sofyan, “Performance Evaluation of Hot Mixture Asphalt Using Concentrated Rubber Latex, Rubber Compound and Synthetic Polymer as Modifier,” Civ. Eng. Dimens., vol. 21, no. 1, pp. 36–42, 2019, doi: 10.9744/ced.21.1.36-42.

B. W. Widianto and M. I. Faishal, “Perubahan Karakteristik Aspal Pen 60/70 dengan Substitusi Getah Karet Alam Pangkalan Balai, Sumatera Selatan,” RekaRacana J. Tek. Sipil, vol. 6, no. 3, p. 143, 2021, doi: 10.26760/rekaracana.v6i3.143.

Kurniadji, “Pengembangan Aspal Karet Dalam Meningkatkan Mutu Campuran Perkerasan Jalan,” Dep. Pekerj. Umum, p. 89, 1999.

A. T. Setyoko and R. Lukiawan, “Pengembangan Standardisasi Karet Alam Sebagai Bahan Baku Aspal Karet Dan Produk Aspal Karet Development of Natural Rubber Standardization for Rubber Raw Material and Asphalt,” no. September 2016, 2019.

Kemendag, “Tren surplus neraca perdagangan berlanjut, surplus neraca perdagangan non migas bulan juli 2022 meningkat,” War. Daglu, 2022.

P. Aspal, S. Dan, A. Elastobond, E. Komala, and E. Tri, “Melalui Sistem Pengujian Marshall Pada Campuran Laston Ac-Wc ( Asphalt Concrete-Wearing Course ),” Tek. Sipil Fak. Tek. Univ. Tanjungpura Pontianak, pp. 1–13, 2018.

M. Mahmuda, D. Y. Wiranata, S. Sumiati, D. A. Agustina, and A. R. Insyra, Evaluating Marshall Characterization of rubber-modified asphalt used for asphalt concrete - wearing course (AC-WC). Atlantis Press International BV, 2024. doi: 10.2991/978-94-6463-386-3_55.

D. Jenderal and B. Marga, “Spesifikasi umum 2018,” no. Revisi 2, 2020.

S. Indira.,Marpaung, Alvin.,Setiadji.B.H., “Evaluasi Gradasi Agregat Pada Campuran AC-WC,” J. Karya Tek. Sipil, vol. 6, no. 2, pp. 1–11, 2017.

D. Widianty, R. Yuniarti, A. Akmaluddin, A. Prabowo, and S. Rawiana, “Analisis Karakteristik Marshall pada Beton Aspal Lapis Pengikat (Asphalt Concrete-Binder Course) menggunakan Aspal Modifikasi Serbuk Serat Pelepah Batang Pisang,” J. Sains Teknol. Lingkung., vol. 6, no. 1, pp. 85–95, 2020, doi: 10.29303/jstl.v6i1.119.

DOI: http://dx.doi.org/10.12962%2Fj2579-891X.v24i1.22085

Refbacks

There are currently no refbacks.

Jumlah Kunjungan:

Jurnal Aplikasi Teknik Sipil by Pusat Publikasi Ilmiah LPPM Institut Teknologi Sepuluh Nopember is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License

Based on work at https://iptek.its.ac.id/index.php/jats

https://education.sjpublisher.org

Username
Password
Remember me