Evaluasi Kinerja Campuran AC-WC dengan Substitusi Parsial Aspal Minyak oleh Asbuton B520 Kadar Rendah
Abstract
Keywords
Full Text:
PDFReferences
C. Li et al., “Laboratory investigation on the properties of warm mixing-recycled asphalt containing waste oil and plastics,” Int. J. Pavement Eng., vol. 25, no. 1, p. 2301455, Dec. 2024.
S. Li, J. Hu, Y. Zhang, and S. Wu, “Use of Natural Asphalt in Hot Mix Asphalt: A Review,” J. Clean. Prod., vol. 261, p. 121217, 2024.
Hamkah, Z. Saing, D. Mairuhu, and M. Tumpu, “Characteristics of Asphalt Concrete Wearing Course Mix Incorporating Recycled Tire Rubber as an Additive,” Geomate J., vol. 26, no. 115, pp. 55–60, 2024.
P. P. dan P. J. dan J. (Pusjatan), “Panduan Teknis Aspal Buton Siap Campur Tipe B5/20,” Kementerian Pekerjaan Umum dan Perumahan Rakyat, Direktorat Jenderal Bina Marga, Bandung, Indonesia, 2019.
A. Mansourian, M. Ghasemi, and A. R. Azarhoosh, “Performance evaluation of asphalt mixtures containing natural asphalt and aramid fibers,” Constr. Build. Mater., vol. 343, p. 128184, 2023.
Z. B. Yıldırım, M. Karacasu, and V. Okur, “Optimisation of Marshall Design criteria with central composite design in asphalt concrete,” Int. J. Pavement Eng., vol. 21, no. 5, pp. 666–676, 2020.
R. Balreddy, G. Murali, and G. Ramakrishna, “Evaluation of performance characteristics of bituminous mixtures modified with natural fibres,” Sustainability, vol. 15, no. 3, p. 2544, 2023.
R. Fernandes, H. Silva, and J. R. M. Oliveira, “Use of Natural Asphalt in Road Pavement: A Review,” Constr. Build. Mater., vol. 217, pp. 371–387, 2019.
H. Hakzah, A. Andriansyah, M. Mustakim, and J. Jasman, “The Aggregate Gradation in Road Reconstruction,” pp. 930–940, 2024.
M. S. Nugroho, “Karakteristik Marshall Quotient Pada Hot Mix Asphalt Menggunakan Agregat Alam Sungai Opak,” INERSIA lNformasi dan Ekspose Has. Ris. Tek. SIpil dan Arsit., vol. 15, no. 2, pp. 84–91, 2019.
H. A. A. Hasyir and S. B. Wasono, “Analysis Mixed Layer Asphalt Surface as Asbuton Ac-Wc Characteristics of Marshall,” IJIEEB Int. J. Integr. Educ. Eng. Bus. , vol. 3, no. 2, pp. 132–143, 2020.
H. P. Nugroho, H. Sujatmiko, and H. Pranoto, “The Effect of Addition of Sugarcane Ash Waste and Low Density Polyethylene Plastic on the Characteristics of Laston AC-WC Mixture,” G-Tech J. Teknol. Terap., vol. 9, no. 1, pp. 1–12, 2023.
E. Indrawati and H. Susanto, “Studi karakteristik campuran AC-WC dengan aspalt Buton B5/20 di daerah tropis,” J. Rekayasa Sipil dan Perenc., vol. 8, no. 2, pp. 45–55, 2022.
R. P. Ardiansyah, Y. A. Putra, and D. Kurniawan, “Analisis daya tahan dan stabilitas AC-WC dengan penambahan aspalt Buton B5/20 dosis rendah,” J. Tek. Perkerasan, vol. 5, no. 1, pp. 10–18, 2023.
Direktorat Jenderal Bina Marga, “Spesifikasi Umum 2018,” Edaran Dirjen Bina Marga Nomor 02/SE/Db/2018, no. Revisi 2, pp. 6.1-6.104, 2018.
Hakzah, S. A, and Yulianti, “Studi Kelayakan Sifat Fisik Agregat Untuk Struktur Perkerasan Jalan (Quarry Gunung Lakera Bum, Gunung Lompongang, Dan Gunung Benderae Kab. Pinrang),” J. Karajata Eng., vol. 1, no. 1, pp. 1–6, 2021.
A. Dwi Sampurno, I. Satyarno, and A. Taufik Mulyono, “Pengaruh Serat Baja (Dramix) Terhadap Kuat Lentur Pada Roller Compacted Concrete (Rcc),” INERSIA lNformasi dan Ekspose Has. Ris. Tek. SIpil dan Arsit., vol. 15, no. 1, pp. 43–53, 2019.
Badan Standarisasi Nasional, “Sni 1969 : 2016,” Metod. Uji Berat Jenis dan Penyerapan Air Agreg. Kasar, no. Jakarta : Badan Standarisasi Nasional, pp. 1–23, 2016.
B. S. Nasional, “SNI 1968:2008 – Metode uji persentase butir pecah agregat kasar,” BSN, 2008.
SNI 2417-2008, “Cara uji keausan agregat dengan mesin abrasi Los Angeles. Badan Standarisasi Nasional, Jakarta.,” Badan Stand. Nas., pp. 1–20, 2008.
SNI 2439, “Metode uji penyelimutan dan pengelupasan pada campuran agregat-aspal,” Standar Nas. Indones., pp. 1–11, 2011.
B. S. Nasional, “SNI 8287:2016 – Metode Uji Partikel Pipih dan Lonjong,” Jakarta, 2016.
Standar Nasional Indonesia, “Metode Uji Bahan Yang Lebih Halus Dari Saringan 75µm (No.200) Dalam Agregat Mineral Dengan Pencucian (ASTM C117-2004,IDT),” vol. SNI ASTM C, no. 200, pp. 1–9, 2012.
M. Pengujian, G. Lempung, M. Pecah, and D. Agregat, “Metode pengujian gumpalan lempung dan butir-butir mudah pecah dalam agregat,” pp. 1–6, 1996.
S. Khusus and C. Panas, “Spek Khusus Campuran Panas dengan Asbuton-Des 2006,” pp. 3–7, 2006.
S. N. Indonesia, “Cara uji penetrasi aspal,” 2011.
S. N. Indonesia, “Cara uji titik lembek aspal dengan alat cincin dan bola ( ring and ball ),” 2011.
B. S. Nasional, “SNI 2432:2011 – Metode Uji Daktilitas Aspal,” Badan Standardisasi Nasional, Jakarta, 2011.
AASHTO, “AASHTO T44-14 – Standard Method of Test for Solubility of Bituminous Materials in Organic Solvents,” Washington, D.C., 2014.
B. S. Nasional, “SNI 2441:2011 – Cara uji berat jenis aspal keras,” BSN, 2011.
S. Nasional, I. Ics, and B. S. Nasional, “Cara uji kadar air dalam produk minyak dan bahan mengandung aspal dengan cara penyulingan,” 2008.
B. S. Nasional, “SNI 06-2444-1991 – Metode uji Marshall pada campuran beraspal,” BSN, 1991.
B. S. Nasional, “SNI 06-2489-1991 – Metode Uji Marshall pada Campuran Beraspal,” Badan Standardisasi Nasional, Jakarta, 1991.
H. A. Hasyir and S. B. Wasono, “Analysis Mixed Layer Asphalt Surface as Asbuton AC‑WC Characteristics of Marshall,” Int. J. Integr. Educ. Eng. Bus., vol. 3, no. 2, pp. 132–143, 2020.
I. M. Asi, M. A. Alhadidi, and T. M. Alhadidi, “Influence of Climate and Traffic on Asphalt Mix Performance with Modified Binders,” J. Pavement Eng. Mater., vol. 12, no. 1, pp. 25–34, 2024.
A. Jiménez del Barco Carrión, J. S. Carvajal-Muñoz, D. Lo Presti, and G. D. Airey, “Effect of laboratory ageing on the rheological properties of asphalt binders containing recycled and natural additives,” Constr. Build. Mater., vol. 204, pp. 432–442, 2019.
X. Chen, Y. Zhang, F. Gu, and Y. Zhao, “Performance evaluation of asphalt mixtures under coupled thermal and mechanical loading conditions,” J. Mater. Civ. Eng., vol. 35, no. 5, p. 4023045, 2023.
DOI: http://dx.doi.org/10.12962%2Fj2579-891X.v23i3.23051
Refbacks
- There are currently no refbacks.
Jurnal Aplikasi Teknik Sipil by Pusat Publikasi Ilmiah LPPM Institut Teknologi Sepuluh Nopember is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License
Based on work at https://iptek.its.ac.id/index.php/jats