SHEAR BUCKLING ANALYSIS OF CORRUGATED WEB I-GIRDER WITH 3D NONLINEAR FINITE ELEMENT METHOD

Ni Putu Ary Yuliadewi, Heppy Kristijanto, Bambang Piscesa, Priyo Suprobo, Faimun Faimun

Abstract


This paper presents a shear buckling analysis of corrugated web I-girder beam using nonlinear finite element analysis. An in-house finite element package called 3D-NLFEA is used in the simulation. The steel material is modelled as solid elements with one-eight aspect ratio between the element size and its thickness. The double sine waves equation is used to generate the initial imperfection in the corrugated web. The nonlinear geometry deformation, which is essential in capturing the buckling behavior, is considered using the 2nd order analysis in 3D-NLFEA. A comparison with the carried out experimental test in the laboratory showed that the peak prediction from the analytical model was in good agreement. Furthermore, using the double sine waves equation as the initial imperfection can closely predict the buckling mode and shapes of the corrugated web I-girder as obtained from the experimental test.

Keywords


corrugated web; double sine waves; imperfection; nonlinear finite element; shear buckling

Full Text:

PDF

References


M. F. Hassanein and O. F. Kharoob, "Behavior of bridge girders with corrugated webs: (II) Shear strength and design," Engineering Structures, vol. 57, pp. 544-553, 2013.

M. Leblouba, M. T. Junaid, S. Barakat, S. Altoubat, and M. Maalej, "Shear buckling and stress distribution in trapezoidal web corrugated steel beams," Thin-Walled Structures, vol. 113, no. December 2016, pp. 13-26, 2017.

K. Aggarwal, S. Wu, and J. Papangelis, "Finite element analysis of local shear buckling in corrugated web beams," Engineering Structures, vol. 162, no. May, pp. 37-50, 2018.

J. Moon, J. W. Yi, B. H. Choi, and H. E. Lee, "Lateral-torsional buckling of I-girder with corrugated webs under uniform bending," Thin-Walled Structures, vol. 47, no. 1, pp. 21-30, 2009.

M. F. Hassanein and O. F. Kharoob, "Behavior of bridge girders with corrugated webs: (I) Real boundary condition at the juncture of the web and flanges," Engineering Structures, vol. 57, pp. 554-564, 2013.

F. Riahi, A. Behravesh, M. Y. Fard, and A. Armaghani, "Shear Buckling Analysis of Steel Flat and Corrugated Web I-girders," KSCE Journal of Civil Engineering, vol. 22, no. 12, pp. 5058-5073, 2018.

R. G. Driver, H. H. Abbas, and R. Sause, "Shear behavior of corrugated web bridge girders," Journal of Structural Engineering, vol. 132, no. 2, pp. 195-203, 2006.

B. Piscesa, M. M. Attard, D. Prasetya, and A. K. Samani, "Modeling cover spalling behavior in high strength reinforced concrete columns using a plasticity-fracture model," Engineering Structures, vol. 196, no. October 2018, p. 109336, 2019.

B. Piscesa, M. M. Attard, and A. K. Samani, "Three-Dimensional Finite Element Analysis of Circular Reinforced Concrete Column Confined with FRP using Plasticity Model," Sustainable Civil Engineering Structures and Construction Materials, vol. 194, p. 109336, 2018.

B. Piscesa, M. M. Attard, D. Prasetya, and A. K. Samani, "Modeling cover spalling behavior in high strength reinforced concrete columns using a plasticity-fracture model," Engineering Structures, vol. 196, p. 109336, 2019.

"SALOME: The Open Source Integration Platform for Numerical Simulation." https://www.salome-platform.org/ (accessed.

J. Ahrens, B. Geveci, and C. Law, "ParaView : An End-User Tool for Large-Data Visualization," in The visualization handbook, vol. 717, 2005.

SALOME - The Open Source Integration Platform for Numerical Simulation. https://www.salome-platform.org/. (2019). [Online]. Available: https://www.salome-platform.org/

T. J. Hughes, The finite element method: linear static and dynamic finite element analysis. Courier Corporation, 2012.

J. Ahrens, B. Geveci, C. Law, C. Hansen, and C. Johnson, "36-ParaView: An End-User Tool for Large-Data Visualization," The Visualization Handbook, p. 717, 2005.

U. Ayachit, "The paraview guide: a parallel visualization application," 2015.

M. Elgaaly, R. W. Hamilton, and A. Seshadri, "Shear strength of beams with corrugated webs," Journal of Structural Engineering, vol. 122, no. 4, pp. 390-398, 1996.

X. Cao, Y. Xu, M. Wang, G. Zhao, L. Gu, and Z. Kong, "Experimental study on the residual stresses of 800 MPa high strength steel welded box sections," Journal of Constructional Steel Research, vol. 148, pp. 720-727, 2018.

M. Khan, A. Paradowska, B. Uy, F. Mashiri, and Z. Tao, "Residual stresses in high strength steel welded box sections," Journal of Constructional Steel Research, vol. 116, pp. 55-64, 2016.

T. Le, A. Paradowska, M. A. Bradford, X. Liu, and H. R. Valipour, "Residual stresses in welded high-strength steel I-Beams," Journal of Constructional Steel Research, vol. 167, p. 105849, 2019.

J. Yi, H. Gil, K. Youm, and H. Lee, "Interactive shear buckling behavior of trapezoidally corrugated steel webs," Engineering Structures, vol. 30, no. 6, pp. 1659-1666, 2008.




DOI: http://dx.doi.org/10.12962/j20861206.v36i2.9611

Refbacks

  • There are currently no refbacks.



Journal of Civil Engineering is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

View My Stats