Investigation of O-Band Brillouin Fiber Laser Flatness at Different SOA Location

H. Ahmad; S. F. Norizan; M.Z. Zulkifli; C. H. Pua; Z.A. Ghani; S. W. Harun

doi:10.12962/j24604682.v7i1.894

Investigation of O-Band Brillouin Fiber Laser Flatness at Different SOA Location

H. Ahmad, S. F. Norizan, M.Z. Zulkifli, C. H. Pua, Z.A. Ghani, S. W. Harun

Abstract

In this paper, we present the different amplitude flatness of O-band Brillouin fiber laser resulting from placing the O band semiconductor optical amplifier at different locations. Stable and flatter peaks of multiwavelength Brillouin were generated by placing the SOA after the nonlinear medium instead of placing it before the nonlinear medium. The maximum number of Stokes are also differs between both configuration where the maximum
number of stokes achieved was 12 generated by 1320 nm Brillouin pump with spacing channels of 12.72 GHz.

Keywords

O band semiconductor optical amplifier; multiwavelength Brillouin fiber laser

Full Text:

PDF

References

M. A. Soto, G. Bolognini and F. D. Pasquale, IEEE Photonics Technology Letters, 21(7), pp. 450-452 (2009).

Y. Shen, X. Zhang, G. Shen, K. Chen, Optics Communications 249, pp. 109-115 (2005).

M. Gonzlez-Herrez, K.Y. Song, and L. Thvenaz, Applied Physics Letters 87, pp. 081113, (2005).

S. Shahi, S. W. Harun, K. Dimyati, M. R. Tamjis and H. Ahmad, Microwave and Opt. Technol. Lett. 52, No. 6, pp. 1416-1418, (2010).

M. H. Al-Mansoori, and M. A. Mahdi,Optic Express 16, pp.

-7654 (2008)

A. K, Zamzuri, M.A. Mahdi, A. Ahmad, M. I. Md Ali, and M.

H. Al-Mansoori, Optics Express, 15 (6), pp. 3000-3005 (2007)

L. T. S. Ting, L. T. Fat and S. W. Harun, Brillouin Erbium Ytterbium Fiber Laser, Proceeding of the International Conf. on Computer and Communication Engeneering 2008, Kuala Lumpur, Malaysia, pp. 143-147, 2008

D. Liu, N. Q. Ngo, X. Y. Dong, S. C. Tjin, and P. Shum, Applied Physic B, 81, pp. 807-811(2005)

DOI: http://dx.doi.org/10.12962%2Fj24604682.v7i1.894