Simple Bond-Graph Model To Predict Dried Material Temperature Evolution in A Batch Type Rotary Dryer

Sugeng Waluyo, Ardiansyah Ardiansyah, Nurul Latifasari, Condro Kartiko, Poppy Arsil, Rumpoko Wicaksono, Muhammad Syaiful Aliim, Rifda Naufalin

Abstract


In this work, we model temperature evolution inside a batch type rotary dryer by using the bond-graph method. The evolution model proposed here is mainly developed to predict dried material temperature inside the dryer during drying process. We implement the model in the 20-SIM bond-graph simulator (Controllab Products, the Netherlands) which shows realistic behaviors of the dried material temperature evolution with different combustion scenarios and rotation speeds.

Keywords


rotary dryer;batch type;dried material;temperature evolution;bond-graph

Full Text:

PDF

References


Effendi, K. N., Fauziah, N., Wicaksono, R., Arsil, P., & Naufalin, R., Analysis of bioactive components and phytochemical of powders stem and leaves of Kecombrang (Etlingera elatior). In IOP Conference Series: Earth and Environmental Science (Vol. 406, No. 1, p. 012003). IOP Publishing, Dec. 2019

Soodmand-Moghaddam, S., Sharifi, M., Zareiforoush, H., & Mobli, H., Mathematical modeling of lemon verbena leaves drying in a continuous flow dryer equipped with a solar pre-heating system, Quality Assurance and Safety of Crops & Foods, 12(1), 57-66, 2020

Naufalin, R., Wicaksono, R., & Arsil, P., Aplikasi cabinet dryer (pengering kabinet) untuk meningkatkan produksi bahan baku pengawet alami buah kecombrang (Etlingera elatior), Dinamika Journal: Pengabdian Masyarakat, 1(3), 2019

Silva, P. B., Nogueira, G. D., Duarte, C. R., & Barrozo, M. A., A New Rotary Dryer Assisted by Infrared Radiation for Drying of Acerola Residues, Waste and Biomass Valorization, 12(6), 3395-3406, 2021

Tarhan, S., Yildirim, S., Tuncay, M. T., & Telci, İ., Development of A Rotary Drum Dryer to Dry Medicinal and Aromatic Plants, Tarım Makinaları Bilimi Dergisi, 4(3), 295-300, 2008

Kaensup, W., Chutima, S., & Wongwises, S., Experimental study on drying of chilli in a combined microwave-vacuum-rotary drum dryer, Drying Technology, 20(10), 2067-2079, 2002

Li, T., Li, C., Li, B., Li, C., Fang, Z., Zeng, Z., & Huang, J, Characteristic analysis of heat loss in multistage counter-flow paddy drying process, Energy Reports, 6, 2153-2166, 2020

Ekka, J. P., Bala, K., Muthukumar, P., & Kanaujiya, D. K., Performance analysis of a forced convection mixed mode horizontal solar cabinet dryer for drying of black ginger (Kaempferia parviflora) using two successive air mass flow rates, Renewable Energy, 152, 55-66, 2020

Pak, A. V., Pogozhikh, N., & Pak, A. O., Development of an Apparatus With Induced Heat-and-Mass Transfer for Drying and Hydrothermal Processing of Moist Materials, Eastern-European Journal of Enterprise Technologies, 3(8), 105, 2020

Abbes, M., & Mami, A, Modelling of a tunnel dryer with a bond graph approach, In 2020 17th International Multi-Conference on Systems, Signals & Devices (SSD) (pp. 219-224), IEEE, July 2020.

Oueslati, H., Mabrouk, S. B., & Mami, A., Dynamic Modelling by Bond Graph Approach of Convective Drying Phenomena, In Dynamical Systems Theory. IntechOpen, 2020

Ferney, M., Modelling and controlling product manufacturing systems using bond-graphs and state equations: Continuous systems and discrete systems which can be represented by continuous models, Production Planning & Control, 11(1), 7-19, 2000

Sagawa, J. K., Nagano, M. S., & Neto, M. S., A closed-loop model of a multi-station and multi-product manufacturing system using bond graphs and hybrid controllers, European Journal of Operational Research, 258(2), 677-691, 2017

Agrawal, A., & Ghoshdastidar, P. S., Computer Simulation of Heat Transfer in a Rotary Lime Kiln, Journal of Thermal Science and Engineering Applications, 10(3), 2018

Eeom, M., Hahn, T., Lee, H., & Choi, S., Performance analysis modeling for design of rotary kiln reactors, Journal of the Korean Society of Combustion, 18(3), 9-23, 2013.

Weisstein, E. W., Cylindrical Segment. https://mathworld. wolfram. com/, 2002

Piton, M., Huchet, F., Le Corre, O., Le Guen, L., & Cazacliu, B., A coupled thermal-granular model in flights rotary kiln: Industrial validation and process design. Applied Thermal Engineering, 75, 1011-1021, 2015.

Broenink, J. F., 20-sim software for hierarchical bond-graph/block-diagram models, Simulation Practice and Theory, 7(5-6), 481-492, 1999.




DOI: http://dx.doi.org/10.12962/j25807471.v8i2.14934

Creative Commons License
JMES The International Journal of Mechanical Engineering and Sciences by Lembaga Penelitian dan Pengabdian kepada Masyarakat (LPPM) ITS is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://iptek.its.ac.id/index.php/jmes.