Hydroxyapatite-Chitosan Composite Coating on TiAl Alloy Electrophoretic Deposition Method
Abstract
Keywords
Full Text:
PDFReferences
K. S. Katti, “Biomaterials in total joint replacement,” Colloids Surfaces B Biointerfaces, vol. 39, no. 3, pp. 133–142, Dec. 2004.
D. C. Hansen, “Metal Corrosion in the Human Body: The Ultimate Bio-Corrosion Scenario,” Electrochem. Soc. Interface , vol. 17, no. 2, pp. 31–34, 2008.
Y. S. Tian, C. Z. Chen, S. T. Li, and Q. H. Huo, “Research progress on laser surface modification of titanium alloys,” Appl. Surf. Sci., vol. 242, no. 1–2, pp. 177–184, Mar. 2005.
F. Xin, C. Jian, J.-P. Zou, W. Qian, Z.-C. Zhou, and J.-M. Ruan, “Bone-like apatite formation on HA/316L stainless steel composite surface in simulated body fluid,” Trans. Nonferrous Met. Soc. China, vol. 19, no. 2, pp. 347–352, 2009.
A. Singh, “Hydroxyapatite, a biomaterial: Its chemical synthesis, characterization and study of biocompatibility prepared from shell of garden snail, Helix aspersa,” Bull. Mater. Sci., vol. 35, no. 6, pp. 1031–1038, Nov. 2012.
S. M. Zo, D. Singh, A. Kumar, Y. W. Cho, T. H. Oh, and S. S. Han, “Chitosan–hydroxyapatite macroporous matrix for bone tissue engineering,” Curr. Sci., vol. 103, no. 12, pp. 1438–1446, 2012.
S. Seuss, M. Lehmann, and A. Boccaccini, “Alternating Current Electrophoretic Deposition of Antibacterial Bioactive Glass-Chitosan Composite Coatings,” Int. J. Mol. Sci., vol. 15, no. 7, pp. 12231–12242, Jul. 2014.
M. H. Santos, M. de Oliveira, L. P. de F. Souza, H. S. Mansur, and W. L. Vasconcelos, “Synthesis control and characterization of hydroxyapatite prepared by wet precipitation process,” Mater. Res., vol. 7, no. 4, pp. 625–630, Dec. 2004.
J. Małecka and W. Grzesik, “High temperature corrosion of Ti-46Al-7Nb-0.7Cr-0.1Si-0.2Ni intermetalics–based alloys in N 2 -O 2 -SO 2 environments,” J. Achiev. Mater. Manuf. Eng., vol. 43, no. 1, pp. 252–259, 2010.
S. G. Sukaryo, A. Latief, and D. Raharsetyadi, “Sintesis Paduan Intermetalik γ-TiAl dengan Teknik Casting,” J. Sains Mater. Indones., vol. 6, no. 2, pp. 55–59, 2005.
C. T. Kwok, P. K. Wong, F. T. Cheng, and H. C. Man, “Characterization and corrosion behavior of hydroxyapatite coatings on Ti6Al4V fabricated by electrophoretic deposition,” Appl. Surf. Sci., vol. 255, no. 13–14, pp. 6736–6744, Apr. 2009.
T. Jiang et al., “Surface Functionalization of Titanium with Chitosan/Gelatin via Electrophoretic Deposition: Characterization and Cell Behavior,” Biomacromolecules, vol. 11, no. 5, pp. 1254–1260, May 2010.
E. Peon, G. Fuentes, J. A. Delgado, L. Morejon, A. Almirall, and R. García, “Preparation and Characterization of Porous Blocks os Sybthetic Hydroxyapatite,” Lat. Am. Appl. Res., vol. 34, pp. 225–228, 2004.
J. Kumirska et al., “Application of spectroscopic methods for structural analysis of chitin and chitosan.,” Mar. Drugs, vol. 8, no. 5, pp. 1567–636, Apr. 2010.
M. Y. Ali, “Studi Korosi Titanium (ASTM B 337 Gr-2) dalam Larutan Artificial Blood Plasma (Abp) pada Kondisi Dinamis dengan Teknik Polarisasi Potensiodinamik dan Teknik Exposure,” Institut Teknologi Sepuluh Nopember, 2007.
DOI: http://dx.doi.org/10.12962/j23546026.y2017i4.3071
Refbacks
- There are currently no refbacks.
View my Stat: Click Here
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.