Numerical Analysis of Shear Behavior of High-Strength Reinforced Concrete Columns
Abstract
Although the utilization of high-strength concrete and high-strength steel can reduced column dimension at high-rise building, the column aspect ratio remain low. These column were tended to dominate by shear failure than flexure failure. The research discusses the numerical analysis of shear critical of High-strength reinforced concrete columns. The Uniaxial Shear Flexure Method (USFM) was used to observe this behavior and examined on the test result. This study showed that USFM method provided conservative prediction. Some modification was proposed in order to improve this method when estimate the shear behaviour of high-strength reinforced concrete column.
Keywords
Full Text:
PDFReferences
H. Aoyama, Design of Modern Highrise Reinforced Concrete Structures. London: Imperial College Press, 2001.
M. A. Caldarone, High-Strength Concrete - A Practical Guide. New York: Taylor & Francis Ltd., 2008.
H. Alrasyid, “Seismic Shear Behavior of High-Strength Reinforced Concrete Columns,” National Taiwan University of Science and Technology, 2016.
H. Mostafaei, “Uniaxial Shear-Flexure Model for Reinforced Concrete Elements,” J. Eng. Struct., 2008.
H. Mostafaei and Kabeyasawa, “Axial-Shear-Flexure Interaction Approoach for Reinforced Concrete Columns,” ACI Struct. J., 2007.
Y.-C. Ou and Kurniawan, “Shear Behavior of Reinforced Concrete Columns With High-Strength Steel and Concrete,” ACI Struct. J., vol. 112, no. 1, pp. 35–45, 2015.
F. Watanabe and T. Kabeyasawa, “Shear Strength of RC Members with High-Strength Concrete,” in Proc., SP-176: High-Strength Concrete in Seismic Regions, 1991.
S. Razvi and M. Saatcioglu., “Confinement Model for High-Strength Concrete,” J. Struct. Enggineering, 1999.
DOI: http://dx.doi.org/10.12962/j23546026.y2017i6.3242
Refbacks
- There are currently no refbacks.
View my Stat: Click Here
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.