Descriptive analysis of Overall Equipment Effectiveness (OEE) in various industry

S T Risyahadi, F Apriliani, S Irawan

Abstract


Industry has to increase their competitiveness in order to make high profits and customer satisfaction. One of its efforts is the application of TPM (Total Productive Maintenance) in any machine production to maximize effectiveness of machine. The OEE (Overall Equipment Effectiveness) is used as an indicator effectiveness of the machine that important to be measured. This research aims to know to scatter value OEE in various type industries, The data in this research were obtained from collecting students' final task reports on Industrial Management Program Diploma IPB who has done internship program in the industry with the topic Total Productive Maintenance. The results indicate that average OEE value  in FMCG, Textile, Chemical Industry and Manufacture Components are more than 60% but lower than 85%, so that is still below the value of the world class industry. Furthermore, availability score has reached world class standard, while performance and quality is still below world class.

Full Text:

PDF

References


Vijayakumar SR, Gajendran S. Improvement of Overall Equipment Effectiveness (OEE) in injection moulding process industry. IOSR J Mech Civ Eng Spes Issue. 2014;2:2278–1684.

Zandieh S, Tabatabaei SAN, Ghandehary M. Evaluation of Overall Equipment Effectiveness in a Continuous Process Production System of Condensate Stabilization Plant in Assalooyeh. Interdiscip J Contemp Res Bus. 2012;3(10):590–8.

Baluch N, Sobry Abdullah C, Mohtar S. Measuring OEE in Malaysian Palm Oil Mills. Interdiscip J Contemp Res Bus. 2012;4(2):733–43.

Kumar Gupta A, Garg RK. OEE Improvement by TPM Implementation: A Case Study. Int J IT, Eng Appl Sci Res Int Res J Consort. 2012;1(1):2319–4413.

Maideen NC, Sahudin S, Yahya NHM, Norliawati AO. Practical Framework: Implementing OEE Method in Manufacturing Process Environment. IOP Conf Ser Mater Sci Eng. 2016 Feb;114(1):12093.

Leflar J. TPM at Hewlett-Packard. Las Vegas, Nevada; 1999.

Samad MA, Hossain MR, Asrafuzzaman M. Analysis of Performance by Overall Equipment Effectiveness of the CNC Cutting Section of a Shipyard. ARPN J Sci Technol. 2012;2(11):1091–6.

Vivekprabhu M, Karthick R, Senthil Kumar G. Optimization of Overall Equipment Effectiveness in A Manufacturing System. Int J Innov Res Sci Eng Technol. 2014;3(3):1192–6.




DOI: http://dx.doi.org/10.12962/j23546026.y2018i3.3728

Refbacks

  • There are currently no refbacks.


View my Stat: Click Here

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.