Kinematic Analysis of SAVGS
Abstract
Keywords
Full Text:
PDFReferences
M. Yu, C. Arana, S. A. Evangelou, and D. Dini, “Quarter-car experimental study for series active variable geometry suspension,” IEEE Trans. Control Syst. Technol., vol. 27, no. 2, pp. 743–759, 2017.
S. Ikenaga, F. L. Lewis, J. Campos, and L. Davis, “Active suspension control of ground vehicle based on a full-vehicle model,” in Proceedings of the 2000 American Control Conference. ACC (IEEE Cat. No. 00CH36334), 2000, vol. 6, pp. 4019–4024.
C. Cheng, S. A. Evangelou, C. Arana, and D. Dini, “Active variable geometry suspension robust control for improved vehicle ride comfort and road holding,” in 2015 American Control Conference (ACC), 2015, pp. 3440–3446.
Y. M. Sam, M. R. H. A. Ghani, and N. Ahmad, “LQR controller for active car suspension,” in 2000 TENCON Proceedings. Intelligent Systems and Technologies for the New Millennium (Cat. No. 00CH37119), 2000, vol. 1, pp. 441–444.
M. A. Nekoui and P. Hadavi, “Optimal control of an active suspension system,” in Proceedings of 14th International Power Electronics and Motion Control Conference EPE-PEMC 2010, 2010, pp. T5-60.
A. Agharkakli, G. S. Sabet, and A. Barouz, “Simulation and analysis of passive and active suspension system using quarter car model for different road profile,” Int. J. Eng. Trends Technol., vol. 3, no. 5, pp. 636–644, 2012.
C. Yue, T. Butsuen, and J. K. Hedrick, “Alternative control laws for automotive active suspensions,” 1989.
S. R. Kristiadi and U. Wasiwitono, “Effect of feedback measurement on LQG control for Low Bandwidth Active Suspension system,” in 2015 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation (ICAMIMIA), 2015, pp. 42–45.
G. Koch, O. Fritsch, and B. Lohmann, “Potential of low bandwidth active suspension control with continuously variable damper,” Control Eng. Pract., vol. 18, no. 11, pp. 1251–1262, 2010.
M. Yu, S. A. Evangelou, and D. Dini, “Model identification and control for a quarter car test rig of series active variable geometry suspension,” IFAC-PapersOnLine, vol. 50, no. 1, pp. 3376–3381, 2017.
C. Arana, S. A. Evangelou, and D. Dini, “Series active variable geometry suspension application to comfort enhancement,” Control Eng. Pract., vol. 59, pp. 111–126, 2017.
U. Wasiwitono, A. S. Pramono, and I. N. Sutantra, “Study on influences of linkage geometry on actively controlled double wishbone suspension,” in AIP Conference Proceedings, 2018, vol. 1983, no. 1, p. 30009.
M. S. Kumar and S. Vijayarangan, “Design of LQR controller for active suspension system,” 2006.
M. Kaleemullah, W. F. Faris, and F. Hasbullah, “Design of robust H∞, fuzzy and LQR controller for active suspension of a quarter car model,” in 2011 4th International Conference on Mechatronics (ICOM), 2011, pp. 1–6.
R. Darus and Y. M. Sam, “Modeling and control active suspension system for a full car model,” in 2009 5th International Colloquium on Signal Processing & Its Applications, 2009, pp. 13–18.
C. Arana, S. A. Evangelou, and D. Dini, “Pitch angle reduction for cars under acceleration and braking by active variable geometry suspension,” in 2012 IEEE 51st IEEE Conference on Decision and Control (CDC), 2012, pp. 4390–4395.
C. Arana, S. A. Evangelou, and D. Dini, “Series active variable geometry suspension application to chassis attitude control,” IEEE/ASME Trans. Mechatronics, vol. 21, no. 1, pp. 518–530, 2015.
C. Arana, S. A. Evangelou, and D. Dini, “Series active variable geometry suspension for road vehicles,” IEEE/ASME Trans. Mechatronics, vol. 20, no. 1, pp. 361–372, 2014.
C. Arana, S. A. Evangelou, and D. Dini, “Car attitude control by series mechatronic suspension,” IFAC Proc. Vol., vol. 47, no. 3, pp. 10688–10693, 2014.
DOI: http://dx.doi.org/10.12962/j23546026.y2020i6.8902
Refbacks
- There are currently no refbacks.
View my Stat: Click Here
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.