Vibration Energy Harvesting on Vehicle Suspension Using Rotary and Linear Electromagnetic Generator

Arif Indro Sultoni, I.N. Sutantra, Agus S. Pramono

Abstract


In this paper, we discuss comparation of vehicle vibration energy harvesting between rotary and linear electromagnetic generator. We construct the two model of energy harvester mechanism and then analyze both of energy absorbtion and vehicle comfortability. Furthermore, we analyze both of energy absorbtion and vehicle comfortability. Vehicle is modeled as quarter car. Rotarty generator harvests 2.5 x 10-4 Watt. The other hand, linear generator has viscous characteristic and capable to generates 90 Watts with 12 Volt power supply for 0.03 m amplitude of bumpy road input. Linear generator reduces oscillation with 1.2 sec settling time. It is more comfort than the angular which has 3 sec in settling time. With unnevenees road input, mean power of this generator is 64 Watt.

Keywords


Vehicle vibration harvesting energy; rotary electromagnetic generator; linear electromagnetic generator

Full Text:

PDF

References


L. Zuo, B. Scully, J. Shestani and Y. Zhou, "Design and characterization of an electromagnetic energy harvester for vehicle suspensions "Smart Mater. Struct pp.1-10, IOP Publishing, UK. February.2010

Z. Longxin and W. Xiaogang, “Structure and Performance Analysis of Regenerative Electromagnetic Shock Absorber”, Journal of Networks, Vol. 5, pp.1467-1474, December.2010.

S.P. Beeby, R.N. Torah, M.J. Tudor, P. Glynne-Jones,T. O’Donnell, C.R. Saha and S. Roy, "A micro electromagnetic generator for vibration energy harvesting", Journal Of Micromechanics And Microengineering pp.1257-1265, IOP Publishing , UK.2007

D. Mammosser and E. Foltête M. "Collet Scavenging energy from a vibrating beam using an electromagnetic transducer", 12th IFToMM World Congress, Besançon (France), 2007.

K. Nakano, Y. Suda, and S. Nakadai, “Self-powered active vibration control using a single electric actuator”, Journal of Sound and Vibration pp 213–235.2007.

A.A. Aldair, and W.J. Wang, "The Energy Regeneration of Electromagnetic Energy Saving Active Suspension In Full Vehicle With Neurofuzzy Controller", International Journal of Artificial Intelligence & Applications. Vol.2, No.2, pp.32-43, April. 2011.

A. Shirahatt, P.S.S. Prasad, P. Panzade, M.M. Kulkarni, “Optimal Design of Passenger Car Suspension for Ride and Road Holding”, J. of the Braz. Soc. of Mech. Sci. & Eng, Vol. XXX , pp 67- 76.2009. January.2008.

B. Ebrahimi, “Development of Hybrid Electromagnetic Dampers for Vehicle Suspension Systems”, Ph.D Thesis, Mechanical Engineering Dept, Univ. waterloo, Ontario, Canada, 2009.

ISO: 2631-1, 1997, “Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration”.

A.I. Sultoni, I.N. Sutantra, A. S.Purnomo, H.L.Guntur, "Energy Harvester for Multi Purpose Vehicle Comfortabillity Enhancement Using Electromagnetic Damper Mechanism",3rd APTECS, International Seminar on Applied Technology, Science and Arts, Surabaya, 2011.




DOI: http://dx.doi.org/10.12962/j20882033.v24i1.136

Refbacks

  • There are currently no refbacks.


Creative Commons License

IPTEK Journal of Science and Technology by Lembaga Penelitian dan Pengabdian kepada Masyarakat, ITS is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://iptek.its.ac.id/index.php/jts.