Earthquake-Resistant Building : Buckling-Restrained Braced Truss-Girder Moment Frames (proposed)
Abstract
Keywords
Full Text:
PDFReferences
Perencanaan Struktur Baja untuk Bangunan Gedung Menggunakan Metoda LRFD. Laboratorium Mekanika Struktur, Pusat Penelitian Antar Universitas, Bidang Ilmu Rekayasa, ITB, Bandung, 139-141. 2000.
Goel, S.C., dan Itani, A.M. ”Seismic Behavior of Open Web Truss Moment Frames”, Journal of Structural Engineering, ASCE, 120(6), 1763-1780. 1994.
Basha, H.S., dan Goel, S.C. ”Seismic-Resistant Truss- Moment Frames with Vierendeel Segment”, The 11th World Conference on Earthquake Engineering, paper no. 487. 1996.
Goel, S.C., dan Itani, A.M., ”Seismic-Resistant Special Truss-Moment Frames”, Journal of Structural Engineering, ASCE, 120(6), 1781-1797. 1994.
AISC. Seismic Provisions for Structural Steel Building, American Institute of Steel Construction, Chicago, 16-18. 1997. 2005.
NEHRP. Recommended Provisions for Seismic Regulations for New Buildings and Other Structures, BSSC, Washington, D.C., 43-75. 2000.
Kurniawan, D., ”Perencanaan dan Evaluasi Daktilitas Gedung Baja Special Truss Moment Frames dengan Sistem Segmen Vierendeel”, Tugas Akhir, Jurusan Teknik Sipil, ITS Surabaya. 2004.
Firmansyah, K., ”Perencanaan dan Evaluasi Daktilitas Gedung Baja Special Truss Moment Frames dengan Sistem Segmen Bresing-X Menggunakan Profil Pelat”, Tugas Akhir, Jurusan Teknik Sipil, ITS Surabaya. 2004.
Sulistyo, I., ”Perencanaan dan Evaluasi Daktilitas Gedung Baja Special Truss Moment Frames dengan Sistem Segmen Bresing-X Menggunakan Profil Siku, Vierendeel”, Tugas Akhir, Jurusan Teknik Sipil, ITS Surabaya. 2004.
Karuniawan, R. ”Studi Daktilitas Gedung Baja Tingkat Tinggi Dengan Sistem Struktur Special Truss Moment Frames Tipe Bresing-X Menggunakan Profil Siku Tunggal”, Tugas Akhir, Jurusan Teknik Sipil, ITS Surabaya. 2005.
Eko, A.K., ”Studi Daktilitas Gedung Baja Tingkat Tinggi Dengan Sistem Struktur Special Truss Moment Frames Tipe Bresing-X Menggunakan Profil Pelat Persegi”, Tugas Akhir, Jurusan Teknik Sipil, ITS Surabaya. 2005.
Kuswanto, Y.D., ”Studi Daktilitas Gedung Baja Tingkat Tinggi Dengan Sistem Struktur Special Truss Moment Frames Tipe Vierendeel”, Tugas Akhir, Jurusan Teknik Sipil, ITS Surabaya. 2005.
Kamura, H., Katayama, T., Shimokawa, H., dan Okamoto, H.
”Mechanical Property of Low Yield Strength Steel and Energy Dissipation Characteristics of Hysteretic Dampers with Low Yield Stee”l, US-Joint Meeting for Advanced Steel Structures, 1-4. 2000.
Shimokawa, H. dan Kamura,. ”Hysteretic Behavior of Flat- Bar Brace Stiffened by Square Steel Tube”, The 6th International Conference on Steel & Space Structures, Singapore, 1-4. 1999.
Tsai, K.C., Lai, J.W., Hwang, Y.C., Lin, S.L., dan Weng,
CH. ”Research and Application of Double-Core Buckling Restrained Braces in Taiwan”, The 13th World Conference on Earthquake Engineering, Vancouver, B.C., Canada, paper no. 2179. 2004.
Kasai, K., Fu, Y., dan Watanabe, A.”Passive Control System for Seismic Damage Mitigation”, Journal of Structural Engineering, ASCE, 124(5), 501-512. 1998.
Kurniawan, D., ”Perencanaan dan Evaluasi Daktilitas Gedung Baja Special Truss Moment Frames dengan Sistem Segmen Vierendeel”, Tugas Akhir, Jurusan Teknik Sipil, ITS Surabaya. 2004.
Sugihardjo, H., dan Merati, W. ”Concept and Design of Ductile Plane Truss and Its Inelastic Behavior Due to Post Elcentro Earthquake”, Prosiding Seminar Nasional Rekayasa Perencanaan ke II, “The Integration of Civil Engineering Scientist Supporting the Improvement of National Economy”, UPN Veteran Jatim, Surabaya, A01-A06. 2004
Sugihardjo, H., ”Perilaku Inelastik Balok Rangka Batang Daktail Berelemen Bresing Anti Tekuk Sebagai Komponen Gedung Bertingkat”, Disertasi, Sekolah Pascasarjana, ITB, Bandung. 2006.
SAP.Integrated Finite Elements Analysis and Design of
Structures, Computers and Structures, Inc., Berkeley, CA. 2000.
Manual of Steel Construction, Load and Resistance Factor
Design (LRFD). American Institute of Steel Construction, Chicago, 5-9. 1997.
ICBO. Uniform Building Code, International Conference of Building Officials, Whtitier, Calif. 1988,1994, 1997.
Akiyama, H., Earthquake-Resistant Limit-State Design for Building, University of Tokyo Press, 11-30. 1985.
Chopra, A.K.,Dynamics of Structures, Theory and Applications to Earthquake Engineering, 2nd ed., Prentice Hall, Upper Saddle River, NJ, 265-283. 2001.
Prakash, V., dan Powell, G.H. DRAIN-2DX, University of California, Berkeley, California. 1992.
Inoue, K. ”Hysteresis-Type Vibrations Dampers. Design of Hysteresis Type Dampers, Steel Construction Today and Tomorrow”, The Japan Iron and Steel Federation, No.7, June, 4-6. 2004.
DOI: http://dx.doi.org/10.12962/j20882033.v19i1.157
Refbacks
- There are currently no refbacks.
IPTEK Journal of Science and Technology by Lembaga Penelitian dan Pengabdian kepada Masyarakat, ITS is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://iptek.its.ac.id/index.php/jts.