Implementations of Autonomous Maintenance to Relieve Stoppages on PT NIKF – Sachet Packaging Chain

Sukanta Sukanta, R. Maulana, Dessy Agustina Sari

Abstract


Autonomous maintenance taught operator to keep devices, create cooperation each employer and did problem solving that occurring in machine. This research described assembling of autonomous maintenance on PT NIKF – minor stoppages trouble in sachet production line. Our team used the OEE method to know the latest line condition and variety losses that causing the performance were not optimal. After that, the next steps were using visual losses map and diagram Pareto to get the detail (component with many losses). By Go See Think Do, the researcher could find much maintenance that must be done in SIC line 1. Through the application, this effort could reduce the losses of minor stoppages - 79,52%.

Keywords


Minor stoppages, go see think do

Full Text:

PDF

References


M. K. Kholil, A. D. Maulidina, and E. Rimawan, “Analisa Total Productive Maintenance Terhadap Produktivitas Kapal/Armada Menggunakan Metode Overall Equipment Effectiveness Pada PT. Global Trans Energy International,” J. Ind. Eng. Manag. Syst., vol. 9, no. 1, pp. 1–18, Mar. 2016.

M. Maran, G. Manikandan, and K. Thiagarajan, “Overall Equipment Effectiveness Measurement: Weighted Approach Method and Fuzzy Expert System,” in IAENG Transactions on Engineering Technologies: Special Issue of the International MultiConference of Engineers and Computer Scientists 2012, 2013, pp. 231–245.

R. Singh, A. M. Gohil, D. B. Shah, and S. Desai, “Total Productive Maintenance (TPM) Implementation in a Machine Shop: A Case Study,” in Procedia Engineering, 2013, vol. 51, pp. 592–599.

O. Taisir and R. Almeanazel, “Total Productive Maintenance Review and Overall Equipment Effectiveness Measurement,” Jordan J. Mech. Ind. Eng., vol. 4, no. Department Of Industrial Engineering, Hashemite University, Zarqa, 13115 Jordan, pp. 517–522, 2010.

K. Mahmood, T. Otto, E. Shevtshenko, and T. Karaulova, “Performance Evaluation By Using Overall Equipment Effectiveness (OEE): An Analyzing tool,” in International Conference on Innovative Technologies 2016, 2016, pp. 6–8.

G. Chand and B. Shirvani, “Implementation of TPM in cellular manufacture,” J. Mater. Process. Technol., vol. 103, no. 1, pp. 149–154, Jun. 2000.

M. C. Eti, S. O. T. Ogaji, and S. D. Probert, “Implementing total productive maintenance in Nigerian manufacturing industries,” Appl. Energy, vol. 79, no. 4, pp. 385–401, Dec. 2004.

P. Tsarouhas, “Implementation of total productive maintenance in food industry: a case study,” J. Qual. Maint. Eng., vol. 13, no. 1, pp. 5–18, Apr. 2007.

B. Al-Najjar and I. Alsyouf, “Enhancing a company’s profitability and competitiveness using integrated vibration-based maintenance: A case study,” Eur. J. Oper. Res., vol. 157, no. 3, pp. 643–657, Sep. 2004.




DOI: http://dx.doi.org/10.12962/j20882033.v29i2.3569

Refbacks

  • There are currently no refbacks.


Creative Commons License

IPTEK Journal of Science and Technology by Lembaga Penelitian dan Pengabdian kepada Masyarakat, ITS is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://iptek.its.ac.id/index.php/jts.