SIMULATION OF JOINT STRENGTH OF SINGLE LAP JOINT OF COMPOSITE PLATES BASED ON VARIATIONS OF PLATE THICKNESS AND OVERLAP LENGTH

Cut Irmafitri, Mas Irfan P Hidayat, Widyastuti Widyastuti

Abstract


In this study, finite element simulation of joint strength of single lap joint of composite plates based on variations of joint thickness and overlap length is presented by using ANSYS software. In the simulation, plate thickness and overlap length of the joint structure are varied. Based on the variations of plate thickness and overlap length, it is found that the largest joint strength is obtained at the values of plate thickness and overlap length of 2 mm and 55 mm, respectively. Also, it appears that the applied loading type will affect to the simulation results.


Keywords


Joint strength; Vibration resistance; Free vibration; Adhesive; Composite

Full Text:

PDF

References


Adams, R.D. (1989). ‘Strength Predictions for Lap Joints, Especially with Composite Adherends. A Review’. The Journal of Adhesion, 30(1-4): 219-242.

Apalak, M. K. and Yildirim, M. (2009). ‘Free Vibration Analysis and Optimal Design of a Clamped-free Single Lap Joint with Unidirectional Laminated Narrow Plates’. Journal of Thermoplastic Composite Materials, 22(2): 183-211.

Apalak, M.K. and Yildirim, M. (2007). “Free Vibration Analysis and Optimal Design of a Cantilevered Adhesively Bonded Composite Tubular Single Lap Joins”. Polymers & Polymer Composites, 489-490.

Aydin, M. D., Özel, A. and Temiz, Ş. (2005). ‘The Effect of Adherend Thickness on the Failure of Adhesively-Bonded Single-Lap Joints’. Journal of Adhesion Science and Technology, 19(8): 705-718.

Campbell, F.C. (2010). Structural Composite Materials. USA: ASM International.

Chawla, K. K. (1998). Composite Materials: Science and Engineering. New York: Springer-Verlag New York.

Ebnesajjad, S. (2010). Handbook of Adhesives and Surface Preparation. Pennsylvania: Elsevier Inc.

Gunes, R., Apalak, M.K. and Yildirim, M. (2007). ‘The free vibration analysis and optimal design of an adhesively bonded functionally graded single lap joint’. International Journal of Mechanical Sciences, 49(4): 479-499.

Hart-Smith, L.J. (1973). ‘Adhesive-Bonded Double-Lap Joints’. NASA Technical Report.

He, X. (2012). ‘Numerical and Experimental Investigations of the Dynamic Response of Bonded Beams with a Single-Lap Joint’. International Journal of Adhesion and Adhesives, 37:79-85.

Hidayat, M.I.P. (2015). System Identification Technique and Neural Networks for Material Lifetime Assessment Application. In Q. Zhu & A.T. Azar (Eds.), Complex System Modelling and Control Through Intelligent Soft Computations, Studies in Fuzziness and Soft Computing 319 (pp. 773-806). Switzerland: Springer International Publishing.

Hidayat, M.I.P., and Yusoff, P.S.M.M. (2009). Optimizing Neural Network Prediction of Composite Fatigue Life Under Variable Amplitude Loading Using Bayesian Regularization. In S. M. Sapuan & I.M. Mujtaba (Eds.), Composite Materials Technology: Neural Network Applications (pp. 221-249). New York, USA: CRC Press.

Hidayat, M.I.P., Ariwahjoedi, B. and Parman, S. (2016), "B-spline collocation method for boundary value problems in complex domains", Int. J. Computing Science and Mathematics, Vol. 7(2), pp. 110-125.

Hidayat, M.I.P., Wahjoedi, B.A., Parman, S. and Irawan, S. (2018), “A Meshfree Approach for Transient Heat Conduction Analysis of Nonlinear Functionally Graded Materials”, International Journal of Computational Methods, Vol. 15(2), pp. 1850007-1 - 1850007-34.

Hidayat, M.I.P., Widyastuti and Fajarin, R. (2020), "A meshless generalized finite difference method for 2D elasticity problems", Engineering Analysis with Boundary Elements, Vol. 117, pp. 89–103.

Jones, R. M. (1999). Mechanics of Composite Materials. New York: Taylor and Francis Group.

Kadioglu, F., Avil, E., Ercan, M.E. and Aydogan, T. (2018). ‘Effects of different overlap lengths and composite adherend thickness on the performance of adhesively-bonded joints under tensile and bending loadings’. IOP Conf. Series: Materials Science and Engineering 369 (2018) 012034 doi:10.1088/1757-899X/369/1/012034.

Karachalios, E.F., Adams, R.D. and da Silva L.F.M. (2013). ‘The behaviour of single lap joints under bending loading’. Journal of Adhesion Science and Technology, 27(16): 1811-1827.

Lee, M., Wang, C.H. and Yeo, E. (2013). ‘Effects of Adherend Thickness and Taper on Adhesive Bond Strength’. International Journal of Adhesion and Adhesives, 44: 259-268.

Petrie, E. M. (2000). Handbook of Adhesives and Sealants. USA: McGraw-Hill.

Raos, P., Kazak, D. And Lucic, M. (2007). ‘Stress-Strain Analysis of Single-Lap Tensile Loaded Adhesives Joint’. AIP Conference Proceedings 908, 1093 (2007); https://doi.org/10.1063/1.2740956.

Shishesaz, M. and Hosseini, M. (2018). ‘Effects of joint geometry and material on stress distribution, strength and failure of bonded composite joints: an overview’. The Journal of Adhesion, 96(12): 1-69.




DOI: http://dx.doi.org/10.12962/j2746279X.v2i2.6567

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.

 
View My Stats