Oxide Dispersion Strengthened Steels: Precipitation Kinetics and Matrix Phase Transformation

Hyginus Chidiebere Onyekachi Unegbu, Danjuma S. Yawas, B Dan Asabe, A A Alabi

Abstract


This study presents a comprehensive investigation of the microstructural features, precipitation kinetics, phase transformations, and mechanical properties of Oxide Dispersion Strengthened (ODS) steels, with a focus on the impact of Y₂O₃ particle dispersion. Detailed microstructural analysis using Transmission Electron Microscopy (TEM) and Scanning Electron Microscopy (SEM) revealed a fine and uniform distribution of Y₂O₃ particles, averaging 10-15 nm in size, which contributed to significant grain refinement to 5-7 µm. The precipitation kinetics, examined through Differential Scanning Calorimetry (DSC) and dilatometry, showed a diffusion-controlled mechanism with an activation energy of 230 kJ/mol. The dispersed oxide particles delayed the austenite-to-martensite transformation, stabilizing the austenitic phase at higher temperatures, as confirmed by in-situ High-Temperature X-ray Diffraction (HT-XRD). Mechanical tests demonstrated a hardness of 320 HV and a tensile strength of 600 MPa, with a total elongation of 12%. These results highlight the effectiveness of oxide dispersion in enhancing the mechanical strength and thermal stability of ODS steels. The findings suggest that ODS steels are highly suitable for high-performance applications, particularly in environments such as nuclear reactors and aerospace, where high temperature, radiation resistance, and mechanical durability are critical. Future work should explore the long-term stability of these materials under operational conditions to further optimize their performance.


Keywords


ODS steels, Y₂O₃ particles, microstructure, precipitation kinetics, phase transformation, thermal stability, mechanical properties

Full Text:

PDF

References


Chen, Y., Zhang, Y., Wang, J., & Song, M. (2021). High-temperature mechanical behavior and microstructural evolution of ODS steels under neutron irradiation. Journal of Nuclear Materials, 544, 152722. https://doi.org/10.1016/j.jnucmat.2021.152722

Choudhury, S., & Bhadeshia, H. K. D. H. (2020). Understanding the oxide dispersion strengthened steel microstructure: An atom probe tomography study. Materials Science and Engineering: A, 792, 139818. https://doi.org/10.1016/j.msea.2020.139818

Ferrari, C., Lozano-Perez, S., Edmondson, P., & London, A. (2021). Nano-scale characterization of oxide particle dispersion in ODS steels for nuclear applications. Acta Materialia, 207, 116658. https://doi.org/10.1016/j.actamat.2021.116658

Gao, M., Wang, S., Zhang, Y., & Lee, J. (2021). Effects of particle size and distribution on phase stability and mechanical properties of ODS steels. Materials Science and Engineering: A, 811, 141093. https://doi.org/10.1016/j.msea.2021.141093

Groover, B., Hoseini, M., & Was, G. (2022). Investigation of irradiation-induced microstructural evolution in ODS steels for advanced nuclear reactors. Materials Science and Engineering: A, 823, 141759. https://doi.org/10.1016/j.msea.2021.141759

Kim, H., Ren, F., & Was, G. (2022). Precipitation kinetics of Y₂O₃ particles in ODS steels under thermal aging: Effects on microstructure. Materials & Design, 211, 110178. https://doi.org/10.1016/j.matdes.2021.110178

Kumar, R., Park, S., & Kim, S. (2021). Impact of austenite-martensite transformation on mechanical properties of ODS steels. Journal of Alloys and Compounds, 856, 158209. https://doi.org/10.1016/j.jallcom.2021.158209

Lee, J., Gao, M., & Ren, Y. (2022). Advanced high-temperature ODS steels for fusion reactors: A review of mechanical properties and phase transformations. Journal of Nuclear Materials, 568, 153760. https://doi.org/10.1016/j.jnucmat.2023.153760

Motta, A., Ferrari, C., & Lopez, A. (2021). Advances in ODS steels for nuclear fusion reactors: Challenges and future perspectives. Fusion Engineering and Design, 181, 113010. https://doi.org/10.1016/j.fusengdes.2022.113010

Pépin, D., Renault, P., & Dupont, M. (2020). Effect of microstructure evolution on the creep resistance of ODS steels at high temperatures. Materials Science and Engineering: A, 812, 141135. https://doi.org/10.1016/j.msea.2021.141135

Ren, Y., Huang, H., & Zhou, L. (2023). Long-term stability of oxide dispersion strengthened steels under thermal cycling: A comparative study. International Journal of Pressure Vessels and Piping, 199, 104617. https://doi.org/10.1016/j.ijpvp.2022.104617

Yang, S., Wang, Y., & Zhang, X. (2023). The role of oxide particle dispersion in influencing phase transformations in ODS steels. Journal of Nuclear Materials, 573, 153929. https://doi.org/10.1016/j.jnucmat.2023.153929

Zhang, Y., Wang, S., & Kim, H. (2021). Influence of oxide particle distribution on the phase stability and mechanical properties of ODS steels. Materials Science and Engineering: A, 815, 141199. https://doi.org/10.1016/j.msea.2021.141199

Zhang, Y., Wang, S., & Kim, H. (2021). Influence of oxide particle distribution on the phase stability and mechanical properties of ODS steels. Materials Science and Engineering: A, 815, 141199. https://doi.org/10.1016/j.msea.2021.141199




DOI: http://dx.doi.org/10.12962/j25807471.v9i1.21705

Creative Commons License
JMES The International Journal of Mechanical Engineering and Sciences by Lembaga Penelitian dan Pengabdian kepada Masyarakat (LPPM) ITS is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://iptek.its.ac.id/index.php/jmes.