.png)
Design, Fabrication, and Testing of a Sensor-Driven Table Tennis Trainer with Real-Time Feedback
Abstract
This paper presents the design, fabrication, and testing of a sensor-driven training device for table tennis that provides real-time feedback and improves training efficacy. To identify ball trajectory and validate shots, the device uses infrared and sound sensors in combination with ESP32 microcontrollers in a master-slave arrangement. A goal-like structure attached to the table collects balls, while sensors assess whether a shot is valid, which is defined as a ball that bounces on the table before entering the goal. Visual feedback is provided via LED strips and an LCD display, guaranteeing that players receive immediate and intuitive performance information. Testing was done under three different conditions: infrared sensor only, infrared plus sound sensor in a quiet area, and infrared plus sound sensor in a noisy environment. The results demonstrated that, while a single infrared sensor reliably identified ball entry, it could not distinguish between valid and invalid shots. Combining infrared and sound sensors yielded complete accuracy in calm situations but dropped to 40% accuracy in noisy environments due to sound interference. The prototype highlights the ability of multi-sensor systems to serve both rookie and advanced players, while emphasizing the necessity for greater noise filtering or alternate sensors for reliable real-world applications.
Full Text:
PDFReferences
H. Zhang, “Application of intelligent sensor network in the assessment of table tennis teaching and training intensity, training volume, and physical fitness,” J. Sens., vol. 2022, p. 4553644, 2022, doi: 10.1155/2022/4553644.
C. Bittendorf, T. Stein, S. Sell, and B. J. Stetter, “Development of an IMU-based motion capture system for swimming: a study protocol,” Curr. Issues Sport Sci., vol. 9, no. 4, p. 015, 2024, doi: 10.36950/CISS_2024_015.
R. Zhu, X. Yang, L. C. Chong, S. Shao, B. István, and Y. Gu, “Biomechanics of topspin forehand loop in table tennis: an application of OpenSim musculoskeletal modelling,” Healthcare, vol. 11, no. 9, p. 1216, 2023, doi: 10.3390/healthcare11091216.
N. Acı and M. F. Kuluöztürk, “Accuracy detection in some sports training using computer vision and deep learning techniques,” Bitlis Eren Univ. J. Sci. Technol., vol. 13, no. 2, pp. 133–158, 2023, doi: 10.17678/beuscitech.1330481.
T. Yamasaki, “Benefits of table tennis for brain health maintenance and prevention of dementia,” Encyclopedia, vol. 2, no. 3, pp. 1078–1086, 2022, doi: 10.3390/encyclopedia2030107.
R. Liu and M. Lames, “Within-match performance fluctuations: assessment and observed vs. expected extent in table tennis,” J. Hum. Kinet., vol. 92, pp. 217–229, 2024, doi: 10.5114/jhk/184275.
J. Yu and P. Gao, “Interactive three-phase structure for table tennis performance analysis: application to elite men’s singles matches,” J. Hum. Kinet., vol. 81, pp. 177–188, 2022, doi: 10.2478/hukin-2022-0015.
M. Rana and V. Mittal, “Wearable sensors for real-time kinematics analysis in sports: a review,” IEEE Sens. J., vol. 21, no. 15, pp. 17079–17094, 2021, doi: 10.1109/JSEN.2021.3084561.
J. Wang, K. Hu, Z. Zhou, X. Xie, and Y. Wu, “Tac-Trainer: a visual analytics system for IoT-based racket sports training,” IEEE Trans. Vis. Comput. Graph., vol. 29, no. 6, pp. 2853–2865, 2023, doi: 10.1109/TVCG.2022.3209352.
M. Hu, M. Zhang, and K. Yu, “Design of sports training information analysis system based on a multi-target visual model under sensor-scale spatial transformation,” PeerJ Comput. Sci., vol. 10, p. e2030, 2024, doi: 10.7717/peerj-cs.2030.
J. Yang and W. Lv, “Optimization of sports training systems based on wireless sensor network algorithms,” J. Phys. Conf. Ser., vol. 1995, p. 012021, 2021, doi: 10.1088/1742-6596/1995/1/012021.
C. Yin and L. Wang, “Application of sports sensors in motion correction in competitive sports,” Mol. Cell. Biomech., vol. 22, no. 3, p. 1160, 2025, doi: 10.62617/mcb1160.
R. S., T. M., D. Yadav, S. Ghumman, A. Mohanta, and S. Rampal, “Real-time tracking of physical activity and exercise performance with wearable sensors,” in Proc. Int. Conf. Multi-Agent Syst. Collaborative Intell. (ICMSCI), 2025.
S. Dev, S. P. Ahmed, A. Das, N. Soni, and P. Sahoo, “Smart sports: enhancing physical performance with IoT and sensor technologies,” in Proc. Int. Conf. Autom. Comput. (AUTOCOM), 2025, pp. 979–979, doi: 10.1109/AUTOCOM64127.2025.10956451.
M. F. Berg, H. Døsvik, K. Ø. Skjølsvik, T. S. Pedersen, V. Aasan, M. Steinert, and S. W. Eikevåg, “Wireless sensor system for real-time performance monitoring in sports,” Front. Sports Act. Living, vol. 5, p. 1305117, 2023, doi: 10.3389/fspor.2023.1305117.
V. Bonaiuto, P. Boatto, N. Lanotte, C. Romagnoli, and G. Annino, “A multiprotocol wireless sensor network for high performance sport applications,” Appl. Syst. Innov., vol. 1, no. 4, p. 52, 2018, doi: 10.3390/asi1040052.
A. Naderi, S. Goli, R. J. Shephard, and H. Degens, “Six-month table tennis training improves body composition, bone health and physical performance in untrained older men: a randomized controlled trial,” Sci. Sports, vol. 36, no. 8, pp. 72.e1–72.e9, 2021, doi: 10.1016/j.scispo.2020.02.008.
F. Pradas, A. de la Torre, L. Carrasco, D. Muñoz, J. Courel-Ibáñez, and J. A. González-Jurado, “Anthropometric profiles in table tennis players: analysis of sex, age, and ranking,” Appl. Sci., vol. 11, no. 2, p. 876, 2021, doi: 10.3390/app11020876.
S. H. Chang, A. T. Purnomo, M. A. C. Bhakti, V. K. Mulia, A. F. Rizky, N. K. H. Fernandez, and F. Triawan, “Machine fault detection through sound analysis using MFCC and machine learning,” J. Teknol., vol. 23, no. 3, 2025.
F. Pradas, I. Ara, V. Toro, and J. Courel-Ibáñez, “Benefits of regular table tennis practice in body composition and physical fitness compared to physically active children aged 10–11 years,” Int. J. Environ. Res. Public Health, vol. 18, no. 6, p. 2854, 2021, doi: 10.3390/ijerph18062854.
B. Hadisujoto, W. N. Budiarta, R. Frandito, K. Saptaji, F. Triawan, D. Wibowo, and J. Ong, “Economical 3D-printed robotic arm for educational training purpose,” J. Teknol., vol. 17, no. 2, pp. 89–100, Jul. 2025, doi: 10.24853/jurtek.17.2.89-100.
DOI: http://dx.doi.org/10.12962%2Fj25807471.v10i1.23464
JMES The International Journal of Mechanical Engineering and Sciences by Lembaga Penelitian dan Pengabdian kepada Masyarakat (LPPM) ITS is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://iptek.its.ac.id/index.php/jmes.