Analysis of Local Content Policy Implementation in Company NJH

Daniel Simanjuntak, Adirizal Nizar

Abstract


Oil and gas companies, contractors and suppliers, under the regulation by the Ministry of Energy and Mineral Resources (EMR), must implement local content implementation in procuring materials and services for oil and gas activities. Company NJH, as one of Production Sharing Contractors, faces problems in the inefficiencies of implementing the local content policy. Three main problems became apparent: unrealistic roadmap implementation, unstandardized contractor performance, and NJH’s human reso urces constraints. Qualitative methodology through interview sessions is used to analyze the current situation within NJH to understand the underlying issues, identify alternative solutions and formulate business solution proposal. Fishbone analysis is used to find the root cause of the inefficiencies. PDCA cycle analysis is also used to formulate business process improvement. The formation of a market research team is recommended to help resolving the roadmap implementation inefficiencies. The goal is to analyze the current SKK Migas PTK 007 Revision 4’s (PTK 007) roadmap adoptability and formulate optimized roadmap to be more practical to contractors and suppliers. A guidance program to support contractor’s documentation format and standards combined with the hiring of local content experts are also recommended as business solution with a goal to expedite verification processes.

Keywords


local content policy; procurement & contracting; fishbone diagram; Plan - Do - Check - Act Cycle (PDCA)

Full Text:

PDF

References


S. Bushell, “Implementing plan, do, check and act,” The Journal for Quality and Participation, p. 58, 1992.

R. D. Harris dan J. S. Wilkinson, “Waveguide Surface Plasmon Resonance Sensor,” Sensors and Actuators, vol. 29, no. 1-3, pp. 261-267, 1995.

N. M. Kassim, M. H. Ibrahim, A. B. Mohammad dan M. Yacob, “Polymer Based Multimode Interfence Optical Couplerol,” dalam Recent Developments in Polymer Waveguides and Devices, Johor, Universiti Teknologi Malaysia, 2008, p. 41.

T. Touam, L. Znaidi, D. Vrel, I. Ninova-Kuznetsova, O. Brinza, A. Fischer dan A. Boudrioua, “Low loss Sol-Gel Thin Film for Waveguide Applications,” Coatings, vol. 3, no. 1, pp. 49-58, 2013.

J. D. B. Bradley, C. C. Evans, J. T. Choy, O. Reshef, P. B. Deotare, F. Parsy, K. C. Phillips, M. Lončar dan E. Mazur, “D.Jonathan, B.Bradley, "Submicrometer-wide Amorphous and Polycrystalline Anatase TiO2 Waveguides for Microphotonic Devices,” Optics Express, vol. 20, no. 21, pp. 23821-23831, 2012.

R. T. Ako, D. Peiris, P. Ekanayake, A. L. Tan, D. J. Young, Z. Zheng dan V. Chellappan, “DSSCs with ZnO@TiO2 Core–Shell Photoanodes Showing Improved Voc: Modification of Energy Gradients and Potential Barriers with Cd and Mg Ion Dopants,” Solar Energy Materials and Solar Cells, vol. 157, p. 18–27, 2016.

N. Hegazy, N. Kinadjian, B. Sadeghimakki, S. Sivoththaman, N. K. Allam dan E. Prouzet, “Tio2 Nanoparticles Optimized for Photoanodes Tested in Large Area Dye-Sensitized Solar Cells (DSSC),” Solar Energy Materials and Solar Cells, vol. 153, p. 108–116, 2016.

N. Tasić, Z. M. Stanojević, Z. Branković, U. Lačnjevac, V. Ribić, M. Žunić, T. Novaković, M. Podlogar dan G. Branković, “Mesoporous Films Prepared from Synthesized TiO2 Nanoparticles and their Application in Dye-Sensitized Solar Cells (DSSCs),” Electrochimica Acta, vol. 210, p. 606–614, 2016.

V. Nguyen, W. Li, V. Pham, L. Wang, P. Sheng dan Q. Cai, “A CdS/ZnSe/TiO2 Nanotube Array and its Visible Light Photocatalytic Activities,” Journal of Colloid and Interface Science, vol. 462, p. 389–396, 2016.

S. A. Yasin, “Characterization Prototype Multimode Interference Device (MMI) For Optical Power,” Dep. of Physics, Fac. of Mathematics and Natural Sciences, Institut Teknologi Sepuluh Nopember, Surabaya, 2013.

Y. R. Meifina, “Study About Application of Slab Waveguide Based on Polymethyl Methacrylate (PMMA) Using Spin Coating Technique As Mass Gauge,” Dep. of Physics, Fac. of Mathematics and Natural Sciences, Institut Teknologi Sepuluh Nopember, Surabaya, 2013.

Rinawati, “Fabrication and Characterization Directional Coupler Slab Structure Based on Polystyrene and Polymethyl Methacrylate (PMMA) Polimer,” Dep. of Physics, Fac. of Mathematics and Natural Sciences, Institut Teknologi Sepuluh Nopember, Surabaya, 2009.

N. Bsiri, M. A. Zrir, A. Bardaoui dan M. Bouaїcha, “Morphological, Structural and Ellipsometric Investigations of Cr Doped TiO2 Thin Films Prepared by Sol–Gel and Spin Coating,” Ceramics International, vol. 42, no. 9, p. 10599–10607, 2016.

B. C. Asiago, “Norwegian Local Content Model A Viable Solution?,” University of Eastern Finland, pp. 471-497, 2017

N. R. Tague, “The Quality Toolbox,” dalam The Quality Toolbox, Milwaukee, William A. Tony, 2005, pp. 390-392.

P. Gupta, “Beyond PDCA - A New Process Management Model,” 2006, p. 46, July 2006.

K. Ishikawa, Introduction to Quality Control, Productivity Press, 1990.

BPS, “Indo China Export Import,” Badan Pusat Statistik, Jakarta, 2019. Ministry of Energy and Mineral Resources, Peraturan Menteri No.15, 2013.

Ministry of Energy and Mineral Resources, Peraturan Menteri No.15, 2013.

S. ten Have, W. ten Have, F. Stevens, M. vander Elst, F. Pol-Coyne, Key Management Roles, Edinburgh Gate: Pearson Education Limited, 2003.

Resources, Ministry of Energy and Mineral, “Pedoman Tata Kerja 007,” SKK Migas, Jakarta, 2013.

Mind Tools Content Team, “Plan-Do-Check-Act (PDCA) - Continually Improving, in a Methodical Way,” 2019. [Online]. Available: https://www.mindtools.com/pages/article/newPPM_89.htm.

SKK Migas, “PTK004 Revision 4,” Jakarta, 2017.




DOI: http://dx.doi.org/10.12962/j23546026.y2020i1.10855

Refbacks

  • There are currently no refbacks.


View my Stat: Click Here

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.