PVDF/TiO2/PEG Hollow Fiber Membrane for Oily Wastewater Treatment at Various Concentration of Oily Wastewater
Fithri Yatul Humairo, Chi Siang Ong, Nurul Widiastuti, Ahmad Fauzi Ismail, Shabrina Adani Putri, Juhana Jafar
Abstract
The purpose of this research is to enhance the performance of PVDF/TiO2 membrane particularly permeate flux in the application of oily wastewater treatment by adding Polyethylene glycol (PEG). Various concentration of oily wastewater was conducted in order to investigate the influence of the concentration on the membrane performance. Results show that by adding the PEG into the PVDF/TiO2 membrane, the permeate flux of oily wastewater was increase compared to PVDF/TiO2 membrane without PEG. The permeate flux was affected by concentration of synthetic oily wastewater. Increasing the concentration of synthetic oily wastewater, decreasing the flux of oily wastewater
Priyanti, P. A. R., “Pengolahan Air Limbah Pencucian Mobil dengan Reaktor Pemisah Minyak dan Karbon Aktif”
Teow, et, al, “Preparation and characterization of PVDF/TiO2 mixed matrix membrane via in situ colloidal precipitation method”, Journal of Desalination, vol. 295, pp. 61 – 69, 2012.
Saljoughi et al, “Effect of PEG additive and coagulation bath temperature on the morphology, permeability and thermal/chemical stability of asymmetric CA membranes,” Journal of Desalination, vol. 262, pp. 72 – 78, 2010.
Ong et al, “Preparation and characterization of PVDF-PVP-TiO2 composite hollow fiber membranes for oily wastewater treatment using submerged membrane system,” Desalination and Water Treatment, pp. 1 – 11, 2013.
