Analytical study of reduced beam sections under monotonic load

Cintantya Budi Casita, Zetta Rasullia Kamandang

Abstract


This paper presents the result of three different type of reduced beam sections (RBS): radius cut, straight cut, and tapered cut under monotonic load using finite element analysis. Load is applied monotonically and divided into 9 steps, start from 500 N to 4500 N, which increasing 500 N for each step, continuously. The dimension for the beam is WF 500x200x10x16 is used for those three types of RBS. The results show that radius cut gives better performance than the other two types. Stress distribution, load-stress curve, and load-displacement curve of those three types of RBS are compared as the result, then lead to the conclusion that the most effective connection amongst those three types of RBS above is RBS with Radius Cut.

Full Text:

PDF

References


J. C. M. Ho and H. J. Pam, “Inelastic design of low-axially loaded high-strength reinforced concrete columns,” vol. 25, no. January 1995, pp. 1083–1096, 2003.

M. Di Ludovico, M. Polese, M. Gaetani, A. Prota, and G. Manfredi, “A proposal for plastic hinges modification factors for damaged RC columns,” Eng. Struct., vol. 51, pp. 99–112, 2013.

K. Kildashti, R. Mirghaderi, I. M. Kani, and K. K. E. T. Al, “PL(A)98-238-379(Dauwe).pdf,” vol. 2012, no. June, pp. 68–76, 2012.

D. V. P. Rao and S. R. S. Kumar, “RHS beam-to-column connection with web opening — parametric study and design guidelines,” vol. 62, pp. 747–756, 2006.

S. Wilkinson, G. Hurdman, and A. Crowther, “A moment resisting connection for earthquake resistant structures,” vol. 62, pp. 295–302, 2006.

N. Iwankiw and J. Hughes, “Dogbone : a new idea to chew on,” no. February, 2016.

S. Chen, C. Yeh, and J. Chu, “Ductile steel beam-to-column connections for seismic resistance,” J. Struct. Eng., vol. 122, pp. 1292–1299, 1996.

A. Zekioglu, H. Mozaffarian, K. L. Chang, and C. M. Uang, “Designing after Northridge,” Mod. Steel Constr., vol. 37, no. 37(3), pp. 36–42, 1997.

Federal Emergency Management agency (FEMA), “State of the art report on connection performance,” no. 355D, pp. 1–305, 2000.

American Institute of Steel Construction, “Prequalified Connections for Special and Intermediate Steel Moment Frames for Seismic Applications,” no. AISC/ANSI 358-16, 2006.

R. Park and T. Paulay, “Reinforced Concrete Structure,” in A Wiley-Interscience Publication, New York, 1975.




DOI: http://dx.doi.org/10.12962/j23546026.y2018i6.4630

Refbacks

  • There are currently no refbacks.


View my Stat: Click Here

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.