Caracterization of Liquid Smoke Bamboo Waste with Pyrolysis Method
Abstract
This research was aimed to produce and to analyze the quality and chemical composition of liquid smoke from bamboo waste by pyrolisis process. Temperatur of pyrolisis reactor were 140 oC, 180 oC, 220 oC, 260 oC and 300 oC for 5 hours to produce liquid smoke. Liquid smoke purified by filtration, distillation and adsorption. Resulted liquid smoke were analyzed yield, acidity, and density. Identifying the chemical composition of liquid smoke was by Gas Chromatography and Mass Spectrometry (GC-MS). Yield of liquid smoke 1,6977% up to 3,9713 %; Acidity of liquid smoke were 1.49 up to 1,9; the density of liquid smoke 1,004 up to 1,045. The results of GC-MS test showed that chemical composition of the liquid smoke have Phenolic compounds 0,5 – 0,6ppm and liquid smoke found not containing of carsinogenic Benz (a) Pyrene.
Keywords
Full Text:
PDFReferences
H. Oramahia and F. Diba, “Maximizing the Production of Liquid Smoke from Bark of Durio by Studying Its Potential Compounds,” Procedia Environ. Sci., vol. 17, pp. 60–69, 2013.
M. Wijaya, E. Noor, T. T. Irawadi, and G. Pari, “Characterization of the chemical component of Liquid smoke and its utulization as biofestiside,” Bionature, vol. 9, no. 1, pp. 34–40, 2008.
K. Sri and W. Santiyo, “Characteristics of Liquid Smoke from Three Types of Bambo,” J. For. Prod. Res., vol. 33, no. 2, pp. 167–174, 2012.
Darmaji, “Optimization of Smoke-making Process,” Agritechl, vol. 22, no. 4, 2000.
S. Tranggono and B. Setiadji, “Produksi Asap Cair dan Penggunaannya pada Pengolahan Beberapa Bahan Makanan Khas Indonesia,” 1997.
DOI: http://dx.doi.org/10.12962/j23546026.y2019i3.5853
Refbacks
- There are currently no refbacks.
View my Stat: Click Here
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.