Study on Carbide Tool Performance in Green Machining of Aeronautical Material: Q-T Models and Finite Element Analysis
Abstract
Keywords
Full Text:
PDFReferences
Sreejith, P.S., Ngoi, B.K.A., “Dry machining: machining of the future,” J. Mater. Proc. Technol. 101: 287. 2000.
Boyer, R.R., 1996, “An overview on the use of titanium in the aerospace industry,” Mater. Sci. and Eng. A213: 103 – 114. 1996.
ISO 8688-2, “Tool life testing in milling” – Part 2. End milling. 1989.
Montgomery, D.C., Design and analysis of experiments. John Wiley & Sons. 1991.
Freeman, R.M., “The machining of titanium and some of its alloys,” Ph.D Thesis, University of Birmingham, UK. 1974.
Hartung, P.D, Kramer, B.M., “Tool wear in machining titanium,” Annals of the CIRP 31/1: 75. 1982.
Dearnley, P.A, Grearson, A.N., “Evaluation of principal wear mechanism of cemented carbide and ceramics used for machining titanium alloys IMI318,” Mater. Sci. Technol. 2: 47. 1986.
DOI: http://dx.doi.org/10.12962/j20882033.v19i3.146
Refbacks
- There are currently no refbacks.
IPTEK Journal of Science and Technology by Lembaga Penelitian dan Pengabdian kepada Masyarakat, ITS is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://iptek.its.ac.id/index.php/jts.