Synthesis N-Doped Activated Carbon from Sugarcane Bagasse for CO2 Adsorption

Randy Yusuf Kurniawan, Irsandi Dwi Oka Kurniawan, Lukman Atmaja, Nurul Widiastuti

Abstract


Nitrogen-doped activated carbon (SBACN) was synthesized from sugarcane bagasse waste as acarbon source and urea as nitrogen source through potassium hydroxide (KOH) activation for 2 h at high temperature via two step methods. The synthesized SBCN was characterized using X-Ray Diffraction (XRD), Scanning Electron Microscope (SEM), and Fourier Transform Infrared (FTIR). The results showed that the SBCN has low degree crystallinity and graphitization with highly developed micropores due to synergistik activation effect of KOH and urea. These characteristics provide an important contribution to carbon dioxide adsorption capacity, which can reach up to 11,20% wt and this value is higher than pristine activated carbon. The results indicating that the presence of this nitrogen functionalities is found to have a beneficial influence on the carbon dioxide adsorption characteristic in standart condition and exhibit considerable potential in solid adsorption.

Keywords


Nitrogen-doped Nitrogen-doped Activated Carbon; Sugarcane Bagasse; KOH and Urea Activation; CO2 Adsorption

Full Text:

PDF

References


J. D. Figueroa, T. Fout, S. Plasynski, H. McIlvried, and R. Srivastava, “Advances in CO2 capture technology—The U.S. Department of Energy’s Carbon Sequestration Program,” Int. J. Greenh. Gas Control, vol. 2, pp. 9–20, 2008.

H. Yang et al., “Progress in carbon dioxide separation dan capture: A review,” J. Environ. Sci., vol. 20, pp. 14– 27, 2008.

N. Hedin, L. Andersson, L. Bergström, and J. Yan, “Adsorbents for the post-combustion capture of CO2 using rapid temperature swing or vacuum swing adsorption,” Appl. Energy, vol. 104, pp. 418–433, 2013.

Y. P. Zhang and L. Lynd, “Toward an Aggregated Understanding of Enzymatic Hydrolysisof Cellulose :Noncomplexed Cellulase Systems,” Biotechnol. Bioeng., vol. 88, pp. 1–28, 2014.

F. Chang, K. Chao, H. Cheng, and C. Tan, “Adsorption of CO2 onto amine-grafted mesoporous silicas’, Separation dan Purification Technology,” Sep. dan Purif. Technol., vol. 70, pp. 87–95, 2009.

F. Akhtar, Q. Liu, N. Hedin, and L. Bergstrom, “Strong and binder free structured zeolite sorbents with very high CO2-over-N2 selectivities dan high capacities to adsorb CO2 rapidly,” Energy Environ. Sci., vol. 25, pp. 7664–7673, 2012.

H. G., W. Li, D. Qian, and A. H. Lu, “Rapid Synthesis of Nitrogen-Doped Porous Carbon Monolith for CO2 Capture,” Adv. Mater., vol. 22, pp. 853–857, 2010.

J. Li et al., “Carbon dioxide capture-related gas adsorption dan separation in metal-organic frameworks,” Coord. Chem. Rev., vol. 255, pp. 1791–1823, 2011.

C. Zhao, X. Chen, C. Zhao, and Y. Liu, “Carbonation and hydration characterization of dry potassium based sorbent for CO2 capture,” Energy & Fuels, vol. 23, pp. 1766–1769, 2009.

FAO, “Mayor Food and Agricultural Commodities and Procedures: Sugarcane Bagasse,” www.fao.org, 2014. [Online]. Available: http://www.fao.org/es/ess/top/commodity.html.

S. Vassilev, “An overview of the chemical composition of biomass,” Fuel, vol. 89, pp. 913–933, 2010.

D. Bhattacharya, L. Germinario, and W. Winter, “Isolation, preparation and characterization of cellulose microfibers obtained from bagasse,” Carbohydr. Polym., vol. 73, pp. 371– 377, 2008.

H. Yi et al., “Adsorption separation of CO2, CH4 and N2 on microwave activated carbon,” J. Chem. Eng., vol. 215, pp. 635–642, 2013.

T. Bandosz, M. Seredych, R. Castellon, Y. Cheng, L. Daemen, and R. Cuesta, “Evidence for CO2 reactive adsorption on nanoporous S- and N-doped carbon at ambient conditions,” Carbon N. Y., vol. 96, pp. 856–863, 2016.

J. Dai, J. Yuan, and P. Giannozzi, “Gas adsorption on graphene doped with B, N, Al, and S : A theoretical study,” Appl. Phys. Lett., vol. 95, pp. 10–13, 2009.

M. Sevilla, B. Parra, and B. Fuertes, “Assessment of the role of micropore size and N-doping in CO2 capture by porous carbons,” Artik. Inst. Nac. del Carbón, pp. 1–27, 2013.

Q. Niu, “Large-size graphene-like porous carbon nanosheets with controllable N-doped surface derived from sugarcane bagasse pith/chitosan for high performance supercapacitors,” Carbon N. Y., pp. 1–34, 2017.

Z. Liu et al., “The fabrication of porous N-doped carbon from widely available urea formaldehyde resin for carbon dioxide adsorption,” J. Colloid Interface Sci., vol. 416, pp. 124–132, 2014.

H. Jeon, G. Min, G. Oh, C. Nah, and J. Park, “Influence of nitrogen moieties on CO2 capture of Carbon Aerogel,” Carbon Lett., vol. 16, pp. 57–61, 2015.

S. Rudatin, “Potensi dan Prospek Pemanfaatan Lignin dari Limbah Industri Pulp dan Kertas di Indonesia,” Ber. Selulosa, vol. 1, pp. 14–17, 1989.

C. Gimba and M. Turoti, “Optimum Condition for Carbonization of Coconut Shell,” Sci. Africana, pp. 12–21, 2008.

Guan, T. Billy, A. L. Puziah, and Y. H. Y. Taufiq, “Physical Preparation of Actived Carbon from Sugarcane Bagasse and Corn Husk And Its Physical and Chemical Characteristics,” Int. J. Eng. Res. Tech, vol. 2, no. 3, 2013.

Shofa, “Pembuatan Karbon Aktif Berbahan Baku Ampas Tebu dengan Aktivasi KOH,” Jakarta, 2012.

I. Susanti, “Aktivasi Karbon Bertemplat Zeolit-Y dengan KOH untuk Peningkatan Kapasitas Adsorpsi Gas CO2,” Surabaya, 2016.

M. Nowrouzi, H. Younesi, and N. Bahramifar, “High ef fi cient carbon dioxide capture onto as-synthesized activated carbon by chemical activation of Persian Ironwood biomass and the economic pre-feasibility study for scale-up,” J. Clean. Prod., vol. 168, pp. 499–509, 2017.

M. Alhassan et al., “Comparative studies of CO2 capture using acid and base modified activated carbon from sugarcane bagasse,” Biofuels, pp. 1–10, 2017.

S. S., “Pembuatan dan Karakterisasi Karbon aktif dari Batubara Riau sebagai Adsorben,” Universitas Indonesia, 2008.

M. Peyravi, “Synthesis of nitrogen doped activated carbon/polyaniline material for CO2 adsorption,” Polym. Adv. Technol., vol. 29, pp. 319–328, 2018.

Z. Geng, “Pore size effect on nanoporous carbon with ultra-high surface area on high-pressure hydrogen storage,” J. Energy Chem., vol. 24, pp. 1–8, 2015.

M. Shafeeyan, W. Daud, A. Shamiri, and N. Aghamohammadi, “Modelling of Carbon dioxide adsorption onto ammonia-modified activated carbon: kinetic analysis and breakthrough behavior,” 2017.

D. Tiwari, H. Bhunia, and K. Bajpai, “Development of chemically activated N-enriched carbon adsorbents from urea formaldehida resin for CO2 adsorption: kinetics, isotherm and thermodynamics studies,” J. Environ. Manage., vol. 218, pp. 579–592, 2018.

J. Chen et al., “Enhanced CO2 Capture Capacity of Nitrogen-Doped Biomass-Derived Porous Carbons,” ACS Sustain. Chem. Eng, pp. 1–7, 2016.

D. Leung, G. Caramanna, and M. Maroto-Valer, “An overview of current status of carbon dioxide capture and storage technologies,” Renew. Sustain. Energy Rev., vol. 39, pp. 426–443, 2014.

N. Widiastuti, H. Wu, H. Ang, and M. Zhang, “Removal of ammonium from grey water using natural zeolite,” Desalination2, vol. 277, pp. 15–23, 2011.

R. Holle, D. W. Audy, and Meiske S, “Kinetika Adsorpsi Gas Benzen pada Karbon Aktif Tempurung Kelapa,” J. Hazard Mater, vol. 36, pp. 681–689, 2006.

Y. Ho, “Review of Second-order Models for Adsorption Systems,” J. Hazard, vol. 36, pp. 681–689, 2006.

R. Kurniawan, Q. Romadiansyah, D. Tsamarah, and N. Widiastuti, “Synthesis of Zeolite-X from Bottom Ash for H2 Adsorption,” J. Mater. Sci. Eng., vol. 299, 2017.




DOI: http://dx.doi.org/10.12962/j20882033.v30i3.5469

Refbacks

  • There are currently no refbacks.


Creative Commons License

IPTEK Journal of Science and Technology by Lembaga Penelitian dan Pengabdian kepada Masyarakat, ITS is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://iptek.its.ac.id/index.php/jts.